Answer:
0,11,7,8
Explanation: hope this helps!
calculate the ph of the solution [oh-] = 1x 10-11 m
a. 11.0
b. 12.0
c. 2.7
d. 3.0
Answer:
d. 3.0
Explanation:
First we calculate the pOH of the solution, using the following formula:
pOH = -log[OH⁻]pOH = -log[1x10⁻¹¹ M]pOH = 11.0Using the pOH we can calculate the pH of the solution, keeping in mind the relationship between pH and pOH:
pH = 14.0 - pOHpH = 14.0 - 11.0pH = 3.0The answer is option d.
How are the electron structures of carbon (C) and oxygen (O) similar? PLEASE HELP
Answer:
Carbon and oxygen are similar in a few ways. They are both elements, which are the fundamental building blocks of all matter. This means that they both have protons and electrons. They also both have neutrons
How many moles are in a solution with a concentration of 5 M and a volume of 0.25 L?
Answer:
160 mL
Explanation:
describe how to calculate the relative atomic mass
If a book has a weight of 23.2 N on Earth, what is its mass?
Answer: Mass is 2,37 kg
Explanation: Weight G = mg, and g = 9.81 m/s² on Earth.
m = W/g = 23.2 N / 9.81 m/s²
no links pls it’s very unhelpful
answer : i don’t knowww :)
Right spelling:
Answer: I don’t know. :)
Help i’m taking a test!!
What new element is formed from the equation below? (Answer form is
MN:, AN: , S)
Answer:
Element Z
Explanation:
I hope this is correct and helps you!
M
Mass can be measured in local units like dharni pau eto. Discuss the advantages of using
standard units of mass over the local units of mass. (Any two points)
N2 Points)
soup answer
Answer:
1.They are reliable.
2.They dont vary from person to person
When two atoms form a molecule, the molecule has lower energy than the two separate atoms. However, when only two atoms are present, they bounce off each other and do not form a molecule. Explain what happens to the energy of the atoms when there are only two atoms and they collide.
DONT GIVE ME A LINK!!
Answer:
they end up bouncing against each other instead of merging together
Explanation:
Please help is for my final An example of a chemical change is-
evaporation of seawater
о
sublimation of dry ice (CO2)
melting of aluminum
burning wood reducing it to ashes
Explanation:
Souring of milk
Baking of cake
A 125.0-g sample of a metal heated to 100.0 ∘C and placed in a calorimeter that contains 250.0 g of water. The temperature rises from 24.3 ∘C to 27.2 ∘C. What is the specific heat capacity of the metal? Ignore the calorimeter in your analysis. Group of answer choices
Answer:
0.333J/g°C is the specific heat of the metal
Explanation:
The heat that the metaal gives is equal to the heat that water is absorbing. The equation is:
S(metal)*ΔT(metal)*Mass(metal) = S(H2O)*ΔT(H2O)*Mass(H2O)
Where S is specific heat, ΔT is change in temperature and mass the mass in grams of the metal and water.
Replacing:
S(metal)*(100.0°C-27.2°C)*125.0g = 4.184J/g°C*(27.2°C-24.3°C)*250.0g
S(metal) = 4.184J/g°C*(27.2°C-24.3°C)*250.0g / (100.0°C-27.2°C)*125.0g
S(metal) = 0.333J/g°C is the specific heat of the metal
0.630 moles of sodium chloride are how many grams (with calculation)
Answer:
Heyaa!! Im Pinky and Im here to inform you that your answer is...
Explanation:
!!! 36.8189451 Grams !!!
Have an amazing day!!!
~Pinky~!!
Would an alkali metal make a good replacement for tin in a tin can? Explain.
Answer:
No
Explanation:
If tin is heated, it can react with alkalis' with the release of hydrogen.
Tin is a great metal that is used for packaging purposes.
It does not react with any acid that may be present in the food material stored inside the tin can which makes it a useful metal. It keeps the food safe.However, if the tin in the tin can is replaced with alkali metals then they will readily react with the acid present in the food materials stored inside, thereby rendering the food unsafe.
https://brainly.com/question/18153051
What is the acceleration of a 7 kg
mass being pulled by a 56 N force?
Answer:
8 meters per second per second
Explanation:
Newton's second law: [tex]f=ma[/tex], force = mass multiplied by acceleration.
Therefore 56 / 7 = acceleration = 8
Will lithium become a cation or anion?
Answer:
Lithium Cation is a monovalent cation that is metabolized much like sodium and is important in many cellular functions inside or on the surface of cells. lithium has a single valence electron that is easily given up to form a cation. Because of this, lithium is a good conductor of heat and electricity as well as a highly reactive element, though it is the least reactive of the alkali metals
Mr. Ragusa is approached in his lab by one of his students named Hassan. Hassan had found a bottle of nitric acid that did not have a labeled molarity and wanted Mr. Ragusa to help him find it's molarity. Mr. Ragusa filled a buret to 4.85 mL with 0.30 M NaOH. Mr. Ragusa added 5 mL of the acid to a flask and added some phenolphthalein. Mr. Ragusa hit the titration spot on, and the final volume in the buret was 43.69 mL. What is the concentration of the Nitric Acid?
Round your answer to 2 decimal places. Include a unit in your answer. (ex: 1.2M)
HNO3 + NaOH --> NaNO3 + H2O
Answer:
2.33M
Explanation:
1. First, make sure the equation is balanced. In this case it would be HNO3+NaOH --> NaNO3 + H2O. (it is already balanced here.)
2. Find the initial volume, final volume, the volume of acid, volume of NaOH.
a. Initial Volume: 4.85 mL
b. Final Volume: 43.69
c. Acid (HNO3) Volume: 5 mL
d Volume NaOH: Initial V - Final V --> 43.69 mL - 4.85 mL = 38.84 mL NaOH
3. Find moles of NaOH reacted using the volume from D. Convert this volume into Liters. Multiply the volume of NaOH by molarity of NaOH given to you before. (.30 M NaOH)
a. x mol NaOH/ .03884 L = .30 mol NaOH/ 1 mol = .011652 mol NaOH
4. Now find the moles of acid. The acid given to you in the equation is HNO3. The .011652 mol NaOH is from the moles reacted that you just found. The moles on the right side would be the co-efficient in front of the elements in the equation. Since this equation does not have any coefficients (it's already balanced), it would just be 1.
a. .011652 mol NaOH/ x mol HNO3 = 1 mol NaOH/ 1 mol HNO3.
x = .011652 mol HNO3
5. Now find the concentration, also known as molarity. Divide the .011652 mol by the volume of acid you have been given (5 mL). Before using 5 mL, divide it by 1000 to get the Liter form.
a. .011652 mol HNO3/ .005 L = 2.3304 M HNO3
I hope you understand now. God bless!
Lead, gold mercury, aluminum which one has the lowest heat capacity?
Which best describes the purpose of a fever?
Answer:
when you have a fever your body is trying to fight off a virus or some other kind of bad Bacteria
Explanation:
I think this because everyone has at least had a fever when they were sick and when you are sick you are likely to have a fever because your body is fighting off a bad bacteria
The best way to increase the amount of a solid solute dissolved in a saturated solution would be to
Answer:
The solubility of a saturated solution can be increased by increasing the temperature.
Explanation:
Temperature -- Generally, an increase in the temperature of the solution increases the solubility of a solid solute. For example, a greater amount of sugar will dissolve in warm water than in cold water. A few solid solutes, however, are less soluble in warmer solutions.
how many moles in 200 grams of Br
What is a jet stream. in your own words but be more detailed about what you say.
(don't send a link)
Which of the following is an example of a molecular element?
a.NaCl b. CO2 c. Na d. O2
Answer:
oxygen (O2) is a molecular element
Explanation:
Molecular compound are chemical compounds that take the form of discrete molecules.
atomic element is an element which occurs independently as atoms and can react with other elements to form a compound
Ionic compounds are the compound which on dissolution form ions in solution
Mixture is the composition of different compounds
During a combustion reaction, 9.00 grams of oxygen reacted with 3.00 grams of CH4.
What is the amount of the leftover reactant?
0.74 grams of methane
0.89 grams of methane
1.22 grams of oxygen
1.45 grams of oxygen
Answer:
0.74
Explanation:
this is the correct answer. I followed a correct answer that had the same probelm with different values, swithxed it with mine, and got 0.75. So its basically 0.74
A substance has a boiling point of 78 °C. Which of the following is true about the substance? (5 points) a It will also change from a gas to a solid at 78 °C while the gas loses energy. b It will also change from a gas to a solid at 78 °C while the gas gains energy. c It will also change from a gas to a liquid at 78 °C while the gas loses energy. d It will also change from a gas to a liquid at 78 °C while the gas gains energy.
Answer: If a substance has a boiling point of [tex]78^{o}C[/tex] then it is true that it will also change from a gas to a liquid at 78 °C while the gas loses energy.
Explanation:
The temperature at which vapor pressure of a liquid substance becomes equal to the atmospheric pressure is called boiling point of substance.
At the boiling point, liquid phase and vapor phase remains in equilibrium.
This means that as liquid phase changes into vapor phase and also vapor phase changes into liquid phase at the boiling point.
Thus, we can conclude that if a substance has a boiling point of [tex]78^{o}C[/tex] then it is true that it will also change from a gas to a liquid at 78 °C while the gas loses energy.
PLSSS HELP WITH THIS ASAP
Answer:
the property of air shown in the figure describe A.mass
a concentrated solution of sulfuric acid, H2SO4, has a concentration of 18.0 M. How many mL of the concentrated acid would be required to make 250. mL of a 1.00 MH2SO4 solution?
Answer: A 13.88 mL of the concentrated acid would be required to make 250. mL of a 1.00 M [tex]H_{2}SO_{4}[/tex] solution.
Explanation:
Given: [tex]M_{1}[/tex] = 18.0 M, [tex]V_{1}[/tex] = ?
[tex]M_{2}[/tex] = 1.00 M, [tex]V_{2}[/tex] = 250 mL
Formula used to calculate the volume of concentrated acid is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\18.0 M \times V_{1} = 1.00 M \times 250 mL\\V_{1} = \frac{1.00 M \times 250 mL}{18.0 M}\\= 13.88 mL[/tex]
Thus, we can conclude that 13.88 mL of the concentrated acid would be required to make 250. mL of a 1.00 M [tex]H_{2}SO_{4}[/tex] solution.
Balance the following equations.
Answer:
A) Mg + H2SO4 → MgSO4 + H2
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
C) CaO + H2O → Ca(OH)2
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
Explanation:
A) Mg + H2SO4 → MgSO4 + H2
The equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
This equation is balanced by putting 2 in front of HCl on the left hand side to balance the elements on the right hand side.
C) CaO + H2O → Ca(OH)2
Thus equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
This equation is balanced by putting 3 in front of Ag and 4 in front of HNO3 on the left hand side while we put 3 in front of AgNO3 on the right side to balance the elements on the right hand side.
If the graph of y = a x 2 + b x + c does not intersect the x -axis, then what is true about the roots? Both are real roots. Both are real roots. Both are imaginary roots. Both are imaginary roots. One is a real root, and one is irrational. One is a real root, and one is irrational. One is a real root, and one is rational.
Answer:
Both roots are imaginary roots.
Explanation:
Consider these things:
If we try to solve x²+1 = 0, notice that we aren't able to solve the equation in Real Number system because there are no negative outputs for quadratic function.
Remember that quadratic function has range greater or equal to the max-min value.
x-axis plane represents the solutions of that equation. If a graph intersects x-axis plane then it has a solution.
While a graph that doesn't have any intersects on x-plane, it means that the equation for that graph doesn't have real solutions but imaginary solutions.
As you may notice some of parabola graph has one intersect, two intersects or none. One intersect is one solution to the equation — Two intersects are two solutions of the equation and lastly, no intersects mean that no real solutions and remain only imaginary solution.
what is zinc chemical formula?
Answer:
Zn+2
Explanation:
I'm sorry if its wrong but have a good one!
Name the sub atomic particles in part Z of a boron atom give the relative charges of these sub atomic particles
Answer:
Neutrons and protons
Explanation:
There are three fundamental subatomic particles, these are;neutrons protons and electrons.
Ernest Rutherford successfully showed that every atom does possess a central core that contain positively charged particles (protons) called the nucleus. Chadwick later discovered the existence of neutrons.
Both protons and neutrons are found in the nucleus. Z represents the nucleus of the boron atom and houses the neutrons and protons of the boron atom.