label the diagram Please
The earth tilt about 23 degrees which leads to the formation of seasons on earth.
At what degree the earth tilt?This is tilted at 23 degrees from the vertical. The northern hemisphere is in the winter season.
This is the path as the earth revolves around the sun. It takes 1 year to complete this path.
This is the path as the earth rotates around its.
So we can conclude that the earth tilt about 23 degrees which leads to the formation of seasons on earth.
Learn more about season here: https://brainly.com/question/25870256
#SPJ1
A boy is swinging a yo-yo with mass 0.5 kg in a circle with radius 0.7 m at a
speed of 7 m/s. what is the tension in the string connecting the yo-yo to the
boy's finger, disregarding the effect of gravity?
a. 35 n
b. 20 n
c. 9 n
d. 12 n
Based on the calculations, the tension in the string connecting the yo-yo to the boy's finger is equal to: A. 35 Newton.
Given the following data:
Mass, m = 0.5 kg.Speed, v = 7 m/s.Radius, r = 0.7 meters.How to calculate the tension in this string?Based on the information provided, we can logically deduce that the tension in the string connecting the yo-yo to the boy's finger is equal to the centripetal force acting on it.
Mathematically, centripetal force can be calculated by using this formula:
Fc = mv²/r
Fc = (0.5 × 7²)/0.7
Fc = 24.5/0.7
Fc = 35 Newton.
Read more on force here: https://brainly.com/question/12570594
#SPJ1
Four students measured the acceleration of gravity. the accepted value for
their location is 9.78 m/s2. which student's measurement has the largest
percent error?
The student 4 measurement has the largest percent error. The discrepancy between the calculated value and the correct value is referred to as an "error" in statistics.
What is the error?An error is a mistaken or erroneous action. In some contexts, an error is interchangeable with a mistake.
The complete question is
'Four students measured the acceleration of gravity. The accepted value for their location is 9.78m/s2. Which student’s measurement has the largest percent error?
A. Student 4: 9.61 m/s2
B. Student 3: 9.88 m/s2
C. Student 2: 9.79 m/s2
D. Student 1: 9.78 m/s2"
The percentage error is found as;
[tex]\rm \% error = \frac{a_A-a_E}{a_E} \times 100[/tex]
The percentage error in the gIven four students is obtained by putting the values in the given problem;
Student 1 ;
[tex]\rm \% error = \frac{9.78-9.78}{9.88}\times 100 \\\\\ \% error = 0 \%[/tex]
Student 2 ;
[tex]\rm \% error = \frac{9.78-9..79}{9.79}\times 100 \\\\\ \% error = - 0.10 \%[/tex]
Student 3 ;
[tex]\rm \% error = \frac{9.78-9.88}{9.88}\times 100 \\\\\ \% error = - 1.01 \%[/tex]
Student 4 ;
[tex]\rm \% error = \frac{9.78-9.61}{9.61}\times 100 \\\\\ \% error =1.77\%[/tex]
Student 4 reports the maximum percentage error.
Hence the student 4 measurement has the largest percent error.
To learn more about the error refer to the link;
https://brainly.com/question/13286220
#SPJ1
what were two weakness of america government under the articals of confederation did the philadelphia mutiny highlight
The weaknesses of the America government under the articals of confederation in which the Philadelphia mutiny highlighted include:
Inability to regulate commerce.Inability to form a military.What is a Mutiny?This is a rebellious act among group of people in order to oppose a certain authority or government.
The government couldn't give soldiers a good working condition due to lack of funds which led to mutiny.
Read more about Mutiny here https://brainly.com/question/1157738
#SPJ1
A pile of 60 sheet’s of paper is 6mm high. Calculate the average thickness of a sheet of the paper
Answer:
0.1 mm
Explanation:
60 sheets = 6 mm
We want 1 sheet so we divide both sides by 60 :
1 sheet = 6/60 mm
1 sheet = 1/10 mm
1 sheet is 0.1 mm
Hope this helped and brainliest please
Transverse waves are to radio waves as longitudinal waves are to:
1. light waves
2. microwaves
3. ultraviolet waves
4. sound waves
URGENT!!!!
The law of conservation of momentum states that, if left alone, what happens to the total momentum of two interacting objects that make up a system?
Answer:
The momentum of the colliding bodies before and after the collision remains constant.
Explanation:
The momentum is constant.
Planetary Nebula/White Dwarf Stars - Little Ghost Nebula. Some red giant stars develop into planetary nebulas as their cores continue to contract, to increase in temperature, and to burn and vent the remaining gases into interstellar space. Eventually, the core collapses to the point where it is hot enough to ionize the vented gases, forming a relatively short-lived (~10,000-20,000 years) planetary nebula. The remaining core collapses into a white dwarf star. The vented materials from the planetary nebula play an important role in enriching the universe in elements with atomic weights less than 26 (forming the basis for carbon-based life like ourselves!). Which type of star will form a planetary nebula
Smaller stars, like our sun, die by ejecting their outer layers of gas into space, resulting in the formation of a planetary nebula.
How planetary nebula formed?A planetary nebula is formed when a red giant ejects its outer atmosphere. A white dwarf is the carbon core of a star that has lost its photosphere.
This results in a one-of-a-kind and breathtaking creation known as a planetary nebula.
Smaller stars, like our sun, die by ejecting their outer layers of gas into space over a 10,000-year period, leaving behind the star's heated core.
Radiation from the white dwarf causes the gas to shine, resulting in a one-of-a-kind and stunning creation known as a planetary nebula.
The carbon core of a red giant that has evacuated its photosphere as a planetary nebula is a white dwarf.
Hence, Smaller stars, like our sun, die by ejecting their outer layers of gas into space type of star will form a planetary nebula
To learn more about the planetary nebula refer to:
https://brainly.com/question/1162533
#SPJ1
Where are heavier elements, like iron or gold made?
*
1 point
In space, between the stars
in the black holes at the centers of galaxies
In the hearts of stars
They were made as part of the big bang
Answer:
In the hearts of stars:
Theory tells us the elements heavier than iron are created by novas
that is when a star explodes, and any heavier elements were once created when a star exploded.
The chart shows the times and accelerations for three drivers.
A 3-column table with 3 rows. The first column labeled drover has entries Kira, Dustin, Diego. The second column labeled acceleration has entries 5.2 meters per second, 8.3 meters per second, 6.5 meters per second. The third column labeled time has entries 6.9 seconds, 3 seconds, 4.2 seconds.
Which lists them from greatest to lowest change in velocity?
Dustin → Diego → Kira
Dustin → Kira → Diego
Kira → Dustin → Diego
Kira → Diego → Dustin
The lists from greatest to lowest change in velocity.Dustin → Diego → Kira. Option A is correct.
What is acceleration?The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.
The acceleration is obtained one by one from the given data as the ratio of the velocity to the time.
For the acceleration of each, you can refer to the excel table attached below.
The velocity changes are listed from largest to least. Dustin and Diego Kira.
Hence, option A is the right answer.
To learn more about acceleration, refer to the link;
https://brainly.com/question/2437624
#SPJ1
Answer:
D. Kira → Diego → Dustin
Explanation:
Got 100% on the test. Y'all have a good day! :p
Diverse crops can become vulnerable to pests, disease, and climate change. Which part of this statement is false?
The statement 'diverse crops can become vulnerable to pests, disease, and climate change' is considered false regarding this last point (climate change).
What is adaptation?Adaptation is an evolutionary process where a species fits certain environmental conditions.
Plant species are intrinsically vulnerable to climate change because they are adapted to certain climate (temperature) conditions.
In conclusion, the statement 'diverse crops can become vulnerable to pests, disease, and climate change' is considered false regarding this last point (climate change).
Learn more about adaptation here:
https://brainly.com/question/1213023
#SPJ1
What is conflict resolution?
A.) committing to fair play
B.) settling a dispute or disagreement
C.) working toward a common goal
D.)trying your best to win
Answer:
B) Settling a dispute or disagreement
Explanation:
A conflict is a disagreement or argument between opposing parties.
A resolution is a solution to a problem.
Knowing both these definitions, the answer choice that makes the most sense would be B) Settling a dispute or disagreement.
Hope this helps!!
Ten minutes after you stop exercising, your heart rate should be (2 points)
equal to your Heart Rate Reserve
in your Target Heart Rate Zone
less than 50 beats per minute
less than 100 beats per minute
Ten minutes after you stop exercising, your heart rate should be equal to your heart rate reserve
What is Heart Rate Reserve?
This is defined as the heart rate the body decreases to after an exercise session has been done.
This however varies according to age of individuals and is calculated by finding the difference between the maximum and resting heart rate.]
Read more about Heart rate here https://brainly.com/question/1575299
#SPJ1
How fast would you (70kg) need to run in order to have the same momentum as a car (750kg) driving at 5 km/hr?
From the calculations and the data provided, the speed is obtained as 15 m/s
What is momentum?The term momentum refers to the product of mass and velocity. Given that we can now proceed with the answer.
Since;
p = mv
m = 750kg
v = 5 km/hr or 1.4 m/s
p = 750kg * 1.4 m/s
p = 1050 kgm/s
If the mass of the body is 70kg, the speed is
v = p/m
v = 1050 kgm/s/70 Kg
= 15 m/s
Learn more about momentum:https://brainly.com/question/24030570
#SPJ1
A boy throws a toy up in the air with an initial velocity of 7.9 m/s at an angle of 37 degrees . what is the maximum height reached by the toy?
The maximum height reached by the toy at the given velocity and angle of projection is determined as 1.15 m.
Maximum height reached by the toyThe maximum height reached by the toy is calculated as follows;
H = u²sin²θ/2g
where;
u is the initial velocityθ is the angle of projectiong is gravityH = (7.9² x (sin37)²)/(2 x 9.8)
H = 1.15 m
Thus, the maximum height reached by the toy at the given velocity and angle of projection is determined as 1.15 m.
Learn more about maximum height here: https://brainly.com/question/12446886
#SPJ1
Our galaxy, the milky way, contains approximately 4.0x1011 starts with an average mass of 2.0x1030kg each. how far away is the milky way from our nearest neighbor, the andromeda galaxy, if andromeda contains roughly the same number of stars and attracts the milky way with a gravitational force of 2.4x1030n?
By applying the law of universal gravitation, the distance between the milky way and the andromeda galaxy is equal to 4.2 × 10¹¹ meters.
Given the following data:
Mass A, m = 4.0 × 10¹¹ kg.Mass B, M = 2.0 × 10³⁰ kg.Gravitational force, F = 2.4 × 10³⁰ Newton.Scientific data:
Gravitational constant = 6.67 × 10⁻¹¹ m/kg²
How to calculate the distance?In order to determine the distance between the milky way and the andromeda galaxy, we would apply the law of universal gravitation.
According to the law of universal gravitation, the distance between two astronomical bodies can be calculated by using this formula:
[tex]d = \sqrt{\frac{GmM}{F} }[/tex]
Substituting the parameters into the formula, we have;
[tex]d = \sqrt{\frac{6.67 \times 10^{-11} \times 2.0 \times 10^{30} \times 4.0 \times 10^{11}}{2.4 \times 10^{30}} }[/tex]
Distance, d = 4.2 × 10¹¹ meters.
Read more on universal gravitation here: https://brainly.com/question/9373839
#SPJ1
Decide whether the following statement is true (T) or false (F).
Original seat belt designs were 2-point or lap belts
1. True
or
2. False
I really hope this is true. also pay no attention to this answer I'm doing it to finish my account
Answer:
True
Explanation:
See picture.
What is the period of a wave that has a frequency of 300 hz?
Answer:
T = 0.003 s
(Period is written as T)
Explanation:
Period = time it takes for one wave to pass (measured in seconds)
frequency = number of cycles that occur in 1 second
(measured in Hz / hertz / 1 second)
Period : T
frequency : f
So, if we know that the frequency of a wave is 300 Hz, we can find the period of the wave from the relation between frequency and period
T = [tex]\frac{1}{f}[/tex] f = [tex]\frac{1}{T}[/tex]
to find the period (T) of this wave, we need to plug in the frequency (f) of 300
T = [tex]\frac{1}{300}[/tex]
T = 0.00333333333
So, the period of a wave that has a frequency of 300 Hz is 0.003 s
[the period/T of this wave is 0.003 s]
Question 2 of 34
You are adding two vectors pointing in the same direction. How do you find
the magnitude of the resultant vector?
OA. By subtracting the magnitude of the shorter vector from the
magnitude of the longer vector
B. By adding the magnitudes of the two vectors
O C. By subtracting the magnitudes of the two vectors
D. By subtracting the magnitude of the longer vector from the
magnitude of the shorter vector
You can find the magnitude of the resultant vector : (B). By adding the magnitudes of the two vectors
Meaning of Vectors
A vector can be defined as any quantity which possesses magnitude and also has direction.
A Vector quantity is very useful because This type of quantity gives more details to the student or teacher analyzing it.
Lear more about Vectors: https://brainly.com/question/25705666
#SPJ1
A bus starts from rest.if the acceleration is 2m/s square, find
i.the distance travelled
ii.the velocity after 2 seconds.
Answer:
The velocity after 2 seconds can be found through:
V = u +a*t
Where V is final velocity, u is initial velocity, a is acceleration and t is time.
V = 0 + 2* 2= 4 meters/second
The distance (s) can be found through:
V^2= u^2 +2*a* s
Where V is final velocity, u is initial velocity, a is acceleration.
4^2= 0^2 + 2 *2*s
16= 0 + 4s
s= 4 meters
Distance (s) can also be found through:
s= ut + 1/2 at^2
s= 0+ 1/2 *2*2^2= 1 *2*2
s= 4 meters
Explanation:
You suspect that the power supply in your desktop pc is failing. you want to use a multimeter to test the power supply. which multimeter setting should you use
The multimeter setting should you use is between 11-12 volts. If the voltage is too high or too low, the power supply must be changed.
What is a multimeter?An instrument made to measure resistance, voltage, and electric current, often across a range of values.
You think your desktop computer's power supply is malfunctioning. To test the power supply, you should use a multimeter.
Between 11 and 12 volts should be seen on the multimeter. The power supply is failing and has to be replaced if it's too high or too low.
Hence, the multimeter setting should you use is between 11-12 volts.
To learn more about the multimeter refer:
https://brainly.com/question/5135212
#SPJ1
a metallic surface is illuminated with light of wavelength 400 nm. if the work function for this metal is 2.4 eV. what is the maximum kinetic energy of the ejected electrons, in electron volts?
Assume that
1 eV = 1.6 * 10^-19
c = 3 * 10^8
h = 6.626 * 10^-34
I already got the answer before and I know that the max kinetic energy is 0.71 eV but when I tried to solve it again, I forgot what to do.
I tried getting the cut off wave lengths and using that combined with the wavelength provided to get the K.E max but it didn't work
The maximum kinetic energy of the ejected electrons will be 0.71 eV.
What is the kinetic energy of electrons?The kinetic energy (KE) of electrons is defined as the product of one-half of the mass of the electron to the square of the velocity at which electrons spin in orbit.
Given data;
λ(Wavelength)= 400 × 10⁻⁹ m
Φ(Work function)=2.4 eV
c(Speed of light)= 3 ×10⁸ m/sec
h(Constant) = 6.626 * 10^-34
[tex]\rm \phi = 2.4 eV = 2.4 \times 1.6 \times 10^{-19} \\\\ \rm \phi =3.84 \times 10^{-19} \ J[/tex]
The maximum kinetic energy is found as;
[tex]\rm KE= \frac{hc}{\lambda} - \phi \\\\ KE= \frac{6.64 \times 10^{-34}}{400 \times 10^{-9}} -3.84 \times 10^{-19} \\\\ KE=1.14\times 10^{-19} \ J[/tex]
Unit conversion:
1 eV = 1.6 * 10⁻¹⁹ j
1 J=1/( 1.6 * 10⁻¹⁹) ev
KE=0.71 eV
Hence, the maximum kinetic energy of the ejected electrons will be 0.71 eV.
To learn more about the kinetic energy of electrons refers to:
https://brainly.com/question/13145345
#SPJ1
17.
_______ energy is energy that is stored or waiting to be used.
Mechanical
Kinetic
Electrical
Potential
Emmett is lifting a box vertically. Which forces are necessary for calculating the total force?
Fp, Ff, and Fg
Fp and FN
Fp, FN, and Ff
Fp and Fg
The forces necessary for calculating the total force are Fp and Fg. The correct option is d.
What is gravity?The force of attraction felt by a person at the center of a planet or Earth is called as the gravity.
The gravitational force, Fg is the attractive force exerted by the Earth on the object that is equal to the mass of the object times the gravitational acceleration.
Emmett is lifting a box vertically. There are only vertical forces acting on the box.
The vertical force must counteract the weight of the object, is the upward force applied on the object.
Thus, the forces necessary for calculating the total force is Fp - Fg.
Learn more about gravity.
brainly.com/question/4014727
#SPJ1
A swimmer swims 20 m in 40 s. The swimmer's average speed is
------------- m/s.
Explanation:
Average speed=distance/time
=20/40
=0.5m/s
if water completely boils in 7 minutes, how long does it take to evaporate
Answer: 20 minutes
Explanation: omm its 20 minutes
L 6.3.2 Test (CST): Applications of Waves Question 5 of 10 Which event provides evidence that matter can reflect waves? O A. An audience member covers her ears during a loud concert. B. A laser beam bounces off a series of mirrors. C. A performer makes shadow puppets on a wall. D. The light from a fireworks show is seen miles away.
An audience member covers her ears during a loud concert shows evidence that matter can reflect waves.
Which event provides evidence that matter can reflect waves?An audience member covers her ears during a loud concert is an event that provides evidence that matter can reflect waves because a sound is heard again and again due to the reflection of waves. This repetition of sound is due to the property of reflection of sound waves.
So we can conclude that an audience member covers her ears during a loud concert shows evidence that matter can reflect waves.
Learn more about wave here: https://brainly.com/question/15663649
#SPJ1
Answer:
A laser beam bounces off a series of mirrors
Explanation:
Individuals should participate in activities __________ to improve cardiovascular fitness.
A.
twice a day
B.
three to five days a week
C.
two to three days a week
D.
seven days a week
HURRY!!
Individuals should participate in activities three to five days a week to improve cardiovascular fitness.
What is cardiovascular fitness?Cardiovascular fitness is a measure of how well ones body can take in oxygen and deliver it to muscles and organs during prolonged periods of exercise.
A person is considered cardiovascular fit if they can exercise for a long period of time without getting unduly tired.
Examples of cardiovascular exercises are;
swimmingcyclinghikingHowever, individuals should participate in activities three to five days a week to improve cardiovascular fitness.
Learn more about cardiovascular fitness at: https://brainly.com/question/5413091
#SPJ1
How does gravity relate to potential energy?
Answer:
the potential energy a massive object has in relation to another massive object due to gravity
Answer:
PE uses the acceleration of gravity in its calculation definition
Explanation:
Potential Energy = mass * acceleration of gravity * height
Explain how fusion and fission are similar to and different from each other at the atomic level. Explain which
process is currently used at most nuclear power plants around the world and which process occurs on the sun.
Please helpp
Nuclear fusion and fission involve changes in the nucleus of atom, but nuclear fission is most in employed nuclear power plants around the world whereas fusion occurs on the sun.
What are nuclear fission and fusion reactions?
Nuclear fission is a reaction in which the nucleus of large atoms are split into nuclei of two or more smaller atoms.
Nuclear fusion is a reaction in which nuclei of two or more smaller atoms are combined to give an atom of larger nucleus.
Large amounts of energy are involved in both reactions.
The Sun produces energy by nuclear fusion.
However, the most commonly employed method in nuclear power plants is nuclear fission because the necessary conditions required for nuclear fusion have not being developed currently.
Therefore, nuclear fusion and fission involve changes in the nucleus of atom, but nuclear fission is most in employed nuclear power plants around the world whereas fusion occurs on the sun.
Learn more about nuclear fusion and fission at: https://brainly.com/question/3992688
#SPJ1