Can anybody help meh :(
A total charge of 9.0 mC passes through a cross-sectional area of a nichrome wire in 3.6s. The number of electrons passing through the cross-sectional area in 10s is

[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]

Giants.

Explanation:

giants are those stars that are not so hot but give a lot of light

Answer:

this pattern to occur there must be coherence in the light beams.

you use a flashlight, the rays are incoherent so diffraction patterns cannot occur.

Explanation:

The point pattern that appears in the wall is the result of the interference and diffraction processes through each space of the mesh, for this pattern to occur there must be coherence in the light beams.

The coherence process is that all the rays have the same constant and phase, before the appearance of the lasers, the light is stopped by a small opening and this ray is the one that passes through the slits, with the appearance of the laser this it is consistent from its production process, so opening is not necessary, with this there is much greater intensity and the measurement process is simplified.

When you use a flashlight, the rays are incoherent so diffraction patterns cannot occur.

Polarization has no effect on diffraction patterns so it does not matter if it is vertical or horizontal.

Answer:

SiZe

Explanation:

bad bunny is the best!!!

Answer:

it is d, just did the quiz. all this came from the amazing com mentor who said a was wrong and it is d, thank you.

Explanation:

This splitting of the big atomic nucleus into smaller nuclei is known as nuclear fission, and further discussion is as follows:

The neutron collides with a uranium atom that splits during the fission of nuclear, producing a tremendous quantity of energy in the form of heat produced. If a uranium atom splits, additional neutrons are extricated.

Therefore, the final answer is "Option D".

Find out more about the nuclear fission here:

brainly.com/question/913303

Answer:

6.8 N.m

Explanation:

The computation of the magnitude of the magnetic torque on the coil is given below:

Given that

n = 400

d =  6.0 cm

Current  is I = 7.0 A

Angle is [tex]\theta[/tex] = 30 degree

Now

We know that

the magnitude of the magnetic torque is

= nIABsin[tex]\theta[/tex]

= (400) (7.0) π ÷ 4 (0.06m)^2 sin(90° - 30°)

As

[tex]\theta[/tex] = (90° - Ф)

=  (400) (7.0) π ÷ 4 (0.06m)^2 sin 60°

= 6.8 N.m

Answer:

Explanation:

Question 1 (1 point)

According to theory, which term best describes the universe before the big bang?

a small densely packed ball of matter

Question 2 (1 point)

Which example is used as evidence that the universe began with the big bang?

Question 2 options:

leftover energy in the form of background radiation in the universe from the event

Question 3 (1 point)

How do scientists use the Doppler effect to understand the universe?

to determine motion of objects

Question 4 (1 point)

The Doppler effect indicates that the universe is expanding because_________.

Which phrase best completes the sentence.

light from other galaxies is red shifted

Question 5 (1 point)

What does a blue shift in light from stars indicate?

The stars are moving closer.

Answer: [tex]7.96\ \mu C[/tex]

Explanation:

Given

The dimension of the plate is [tex]1\ cm\times 6\ cm[/tex]

The gap between the plate is [tex]0.001\ cm[/tex]

Voltage applied [tex]V=15,000\ V[/tex]

The capacitance of the capacitor is

[tex]C=\dfrac{\epsilon_o A}{d}\\\\C=\dfrac{8.85\times 10^{-12}\times 1\times 6\times 10^{-4}}{10^{-5}}\\\\C=53.1\times 10^{-11}\ F[/tex]

Charge acquired by the capacitor

[tex]\Rightarrow Q=CV\\\Rightarrow Q=53.1\times 10^{-11}\times 15,000\\\Rightarrow Q=796.5\times 10^{-8}\\\Rightarrow Q=7.96\times 10^{-6}\ C[/tex]

Answer:

..In a distance-time graph, the slope or gradient of the line is equal to the speed of the object. The steeper the line (and the greater the gradient) the faster the object is moving. Calculate the speed of the object represented by the green line in the graph, from 0 to 3 s.

d) steeper

D)Today

Answer:

Im sorry I do not know how to do this, I hope you will be able to figure it out

Explanation:

Answer:

The wavelength will be "1.182 μm".

Explanation:

The given values are:

Wavelength

[tex]\lambda=591 \ nm[/tex]

or,

  [tex]=591\times 10^-9 \ m[/tex]

Distance,

[tex]d = 3.00 m[/tex]

[tex]n = 1[/tex]

Distance of fringe from center,

[tex]y = 4.84 \ mm[/tex]

We have to find the wavelength of first order dark fringe,

[tex]\lambda = ?[/tex]

As we know,

⇒ [tex]y_{bright} =\frac{1\times \lambda\times L}{d}[/tex]

On putting the given values in the formula, we get

   [tex]0.00484=\frac{1\times (591\times 10^{-9})\times 3}{d}[/tex]          

On applying the cross multiplication, we get

   [tex]\lambda = \frac{0.00484\times 000036632}{0.5\times 3}[/tex]

      [tex]=1182\times 10^{-9}[/tex]

or,

      [tex]=1.182 \ \mu m[/tex]    

Answer:

ΔT = 4.058 10²⁰ [tex]\frac{S_o^2}{r^2 \ c_e}[/tex]

Explanation:

In this experiment the system can be approximated as a tube with one end open and the other closed.

The open end is where the ultrasound emitter is and the closed end where the limit between the tissue and the bone is, the length of the tube is L = 0.55 cm = 5.5 10⁻³ m

a node is formed at the closed end and a belly at the open end, so the resonance has the form

             λ = 4L                    1st harmonic

             λ = 4/3 L                third harmonic

             λ = 4/5 L                fifth harmonic

             λ = 4L / (2n + 1)     n = 0, 1, 2, (2n + 1)

This wave is a standing wave therefore energy density remains in place

                P = 1/2 ρ v (w S₀)²

angular velocity is related to frequency

               w = 2π f

we substitute

                E = P = 2π² ρ v f² S₀²

if this energy per unit area is transformed into heat

                E = m c_e DT

let's use the concept of density

                ρ = m / V

                m = ρ V

if there are no losses in the system

       ½ π² ρ v f² S₀² = ρ V c_e ΔT

       ΔT = [tex]\frac{\pi ^2 \ v \f^2 S_o^2}{2V \ c_e}[/tex]

When analyzing this expression the temperature increase is

* quadratic at the frequency and maximum amplitude of the wave

* proportional to the speed of the wave in the tissue

* inversely proportional to tissue volume

we can approximate the volume of the tissue to the volume of a cylinder tube

            V = π r² L

           ΔT = [tex]\frac{\pi \ v \ f^2 S_o^2 }{r^2 \ L \ c_e}[/tex]

we calculate

            ΔT = π 1450 (0.7 10⁶)² S₀² /( r² 5.5 10-3 c_e)

            ΔT = 4.058 10²⁰ [tex]\frac{S_o^2}{r^2 \ c_e}[/tex]

Answer:

Material that allow the electrons to move freely in order to produce a current

Please mark as brainliest if answer is right

Have a great day, be safe and healthy  

Thank u  

XD  

Answer: i think it is for 16,  Infectious diseases commonly spread through the direct transfer of bacteria. for 17 i think In biology, immunity is the capability of multicellular organisms to resist harmful microorganisms. i dont have a clue about the others but i hope this is right or atleast helps

Explanation:

Answer:

a) -3.267 m/s

b) 2.227 m/s

Explanation:

As per the conservation of momentum

m1v1 + m2v2=0

m1= mass of log

m2 = mass of lumber jack

v1 = velocity of log

v2 = velocity of lumber jack

a) Velocity of first log

[tex]-\frac{70*7}{150} = -3.267[/tex] m/s

b) m1v1 + m2v2 = m3v3

Velocity of log

= [tex]\frac{70*7}{150+70} \\2.227[/tex]

Answer:

0.5 m/s

Explanation:

acceleration= force times mass

Given the amount of force applied on the sled as well as its mass, the acceleration of the sled is 0.5m/s².

A force is simply referred to as either a push or pull of an object resulting from the object's interaction with another object.

From Newton's Second Law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration

Given the data in the question;

F = m × a

10kgm/s² = 20kg × a

a = 10kgm/s² ÷ 20kg

a = 0.5m/s²

Given the amount of force applied on the sled as well as its mass, the acceleration of the sled is 0.5m/s².

Learn more about force here: brainly.com/question/27196358

#SPJ2

Answer:

L = 0.1379 m = 13.79 cm

Explanation:

The Rayleigh criterion establishes that two objects are separated when the maximum of diffraction for slits coincides with the minimum of the other point, therefore the expression for the diffraction

            a sin θ = m λ

the first zero occurs when m = 1

let's use trigonometry to find the angle

          tan θ = y / L

as in these experiments the angles are very small

          tan θ = sin θ /cos θ = sin θ

          sin θ = y / L

we substitute

          a y /L = λ

In the case of circular aperture the system must be solved in polar coordinates, for which a numerical constant is introduced

           a y / L = 1.22 λ

           L = a y / 1.22 λ

We search the magnitudes to the SI system

           a = 1.04 cm = 1.04 10⁻² m

           y = 9.09 10⁻⁶ m

           λ = 562 10⁻⁹ m

let's calculate

           L = [tex]\frac{1.04 \ 10^{-2} \ 9.09 \ 10^{-6} }{1.22 \ 562 \ 10^{-9} }[/tex]

           L = 1.379 10⁻¹ m

           L = 0.1379 m = 13.79 cm

Answer:

The angular width is "[tex]1.575\times 10^{-3} \ rad[/tex]" and the linear width is "[tex]2.835\times 10^{-3} \ m[/tex]".

Explanation:

Given:

Wavelength,

[tex]\lambda = 630 \ nm[/tex]

or,

  [tex]=630\times 10^{-9} \ m[/tex]

Slit width,

[tex]a = 0.8 \ mm[/tex]

or,

  [tex]=0.8\times 10^{-3} \ m[/tex]

Distance between slit and screen,

[tex]D = 1.8 \ m[/tex]

As we know,

The central bright fringe's angular height,

⇒ [tex]\theta = \frac{2 \lambda}{a}[/tex]

       [tex]= \frac{2\times 630\times 10^{-9}}{0.8\times 10^{-3}}[/tex]

       [tex]=1.575\times 10^{-3} \ rad[/tex]

and,

The linear width will be:

⇒ [tex]x_o=\frac{2D \lambda}{a}[/tex]

By substituting the values, we get

        [tex]=\frac{3\times 1.8\times 630\times 10^{-9}}{0.8\times 10^{-3}}[/tex]

        [tex]=2.835\times 10^{-3} \ m[/tex]

The following that describes an electric insulator are :

C. A material that has a high resistance and prevents charges from  moving freely.    

Thus, the correct answer is C.

Know more :

https://brainly.com/question/14993630?referrer=searchResults

Answer:

θ₁ = 0.5 revolution

Explanation:

We will use the conservation of angular momentum as follows:

[tex]L_1=L_2\\I_1\omega_1=I_2\omega_2[/tex]

where,

I₁ = initial moment of inertia = 18 kg.m²

I₂ = Final moment of inertia = 3.6 kg.m²

ω₁ = initial angular velocity = ?

ω₂ = Final Angular velocity = [tex]\frac{\theta_2}{t_2} = \frac{2\ rev}{1.2\ s}[/tex] = 1.67 rev/s

Therefore,

[tex](18\ kg.m^2)\omega_1 = (3.6\ kg.m^2)(1.67\ rev/s)\\\\\omega_1 = \frac{(3.6\ kg.m^2)(1.67\ rev/s)}{(18\ kg.m^2)}\\\\\omega_1 = \frac{\theta_1}{t_1} = 0.333\ rev/s\\\\\theta_1 = (0.333\ rev/s)t_1[/tex]

where,

θ₁ = revolutions if she had not tucked at all = ?

t₁ = time = 1.5 s

Therefore,

[tex]\theta_1 = (0.333\ rev/s)(1.5\ s)\\[/tex]

θ₁ = 0.5 revolution

Answer:

Frequency = 1,550Hz

Explanation:

To solve this we can use the equation: [tex]f=\frac{v}{\lambda}[/tex]

(frequency = velocity/wavelength).

We are given the information that the wavelength is 22cm and the speed is 340m/s. The first step is to make sure everything is in the correct units (SI units), and to convert them if needed. The SI Units for velocity and wavelength are m/s and m respectively. This means we need to convert 22cm into meters, which we can do by dividing by 100, (as there are 100cm in a meter). 22/100 = 0.22m

Now we can substitute these values into the formula and calculate to solve:

[tex]f=\frac{340}{0.22} \\\\f=1545.454...[/tex]

Simplify to 3 significant figures:

f = 1,550Hz

(Which I believe is just below a G6 if you were interested)

Hope this helped!

In a case whereby the company hires a security firm to patrol their stores and watch for thieves, this is an example of Inventory control.

Inventory control, also known as stock control, is the procedure used to guarantee that a business has the appropriate amount of supplies on hand. As long as internal and production controls are in place, the business can meet client demand and maintain financial flexibility.

The general definition of inventory control or stock control is "the action of verifying a shop's stock." It is the process of making sure that a business has the appropriate amount of supply on hand.

Learn more about Inventory at:

https://brainly.com/question/26533444

#SPJ1

Answer:

Fc = 123 Newton

Explanation:

Net force can be defined as the vector sum of all the forces acting on a body or an object i.e the sum of all forces acting simultaneously on a body or an object.

Mathematically, net force is given by the formula;

[tex] Fnet = Fapp + Fg[/tex]

Where;

Fnet is the net force.

Fapp is the applied force.

Fg is the force due to gravitation.

Given the following data;

Normal force = 25N

Mass = 10kg

To find the centripetal force;

From the net force, we have the following formula;

Fc = N + mg

Where;

Fc is the centripetal force.

N is the normal force.

mg is the the weight of the object.

Substituting into the formula, we have;

Fc = 25 + 10(9.8)

Fc = 25 + 98

Fc = 123 Newton

Answer:

Increases

Explanation:

The light is emerging from a denser medium to rarer medium so the average light speed increases.

When a light beam emerges from water into air, the average light speed increases.

      The bending of a ray passes at an angle from one medium to another in which the speed will be different, as when light passes from air into water and also from water into air can be known as refraction.

      When light travels from water to air, the angle from water to air the light  gets speeds up and then its changes direction. The light turns away from the normal line. Because the light moves from a denser medium to the rarer medium. But from air to water the speed will be decreased because in that case the light travels from the rarer medium to the denser medium.

Hence, the light beam when passes, the average speed gets increased.

So, Option A is the correct answer.

Learn more about refraction,

https://brainly.com/question/2660868

#SPJ2

Answer:

A.

Explanation:

A po sa tingin ko

sana po makatulong

Answer:

Percentage:

Rr = 50% because it's 2/4 (for both or 25% each since you have them separate)

rr = also 50%, because it's also 2/4.

Phenotype:

Rr = heterozygous

rr = "hozygous" recessive

In addition, RR is "hozygous" dominant

Explanation:

They said the hozygous is a swearword LOL.

False

Explanation:

Called an asteroid for many years, Ceres is so much bigger and so different from its rocky neighbors that scientists classified it as a dwarf planet in 2006. Even though Ceres comprises 25 percent of the asteroid belt's total mass, tiny Pluto is still 14 times more massive.

Answer: 5

Explanation: B is for sure 60°, c* cosB = 10*1/2 =5