User experience is one of the most important things considered in the modern IT world. Almost 90% of the population is dependent on mobile phones, electronic devices. So, one things that come is app development. Therefore, in order to enhance more growth in app development, there need to better user experience. We need to think about users and i don't Know More info.
Find the sum of the values from one to ten using recursion
Answer:
see picture
Explanation:
The result is 55, which can also be verified using the formula:
(n)(n-1)/2 => 10*9/2 = 55
Complete the statement below using the correct term.
One recurring problem in networking is finding that users have used a hub or a switch to circumvent a
________
Answer:
HURRY
Dr. Khan works for the marketing department of a company that manufactures mechanical toy dogs. Dr. Khan has been asked to assess the effectiveness of a new advertising campaign that is designed to be most persuasive to people with a certain personality profile. She brought four groups of participants to the lab to watch the video advertisements and to measure the likelihood that they would purchase the toy, both before and after watching the ad. The results of Dr. Khan’s study are presented below.
Part A
Explain how each of the following concepts applies to Dr. Khan’s research.
Survey
Dependent variable
Big Five theory of personality
Part B
Explain the limitations of Dr. Khan’s study based on the research method used.
Explain what Dr. Khan’s research hypothesis most likely was.
Part C
Use the graph to answer the following questions.
How did the trait of agreeableness affect how people responded to the new ad campaign?
How did the trait of conscientiousness affect how people responded to the new ad campaign?
In numerical methods, one source of error occurs when we use an approximation for a mathematical expression that would otherwise be too costly to compute in terms of run-time or memory resources. One routine example is the approximation of infinite series by a finite series that mostly captures the important behavior of the infinite series.
In this problem you will implement an approximation to the exp(x) as represented by the following infinite series,
exp(x) = Infinity n= 0 xn/xn!
Your approximation will be a truncated finite series with N + 1 terms,
exp(x, N) = Infinityn n = 0 xn/xn!
For the first part of this problem, you are given a random real number x and will investigate how well a finite series expansion for exp(x) approximates the infinite series.
Compute exp(x) using a finite series approximation with N E [0, 9] N (i.e. is an integer).
Save the 10 floating point values from your approximation in a numpy array named exp_approx. exp_approx should be of shape (10,) and should be ordered with increasing N (i.e. the first entry of exp_approx should correspond to exp(x, N) when N = 0 and the last entry when N = 9).
Answer:
The function in Python is as follows:
import math
import numpy as np
def exp(x):
mylist = []
for n in range(10):
num = (x**n)/(math.factorial(n))
mylist.append([num])
exp_approx = np.asarray(mylist)
sum = 0
for num in exp_approx:
sum+=num
return sum
Explanation:
The imports the python math module
import math
The imports the python numpy module
import numpy as np
The function begins here
def exp(x):
This creates an empty list
mylist = []
This iterates from 0 to 9
for n in range(10):
This calculates each term of the series
num = (x**n)/(math.factorial(n))
This appends the term to list, mylist
mylist.append([num])
This appends all elements of mylist to numpy array, exp_approx
exp_approx = np.asarray(mylist)
This initializes the sum of the series to 0
sum = 0
This iterates through exp_approx
for num in exp_approx:
This adds all terms of the series
sum+=num
This returns the calculated sum
return sum
spreadsheet formula for total 91?
Answer:
Go to any blank cell. Enter the number 91.
Select the cell that contains 91. Press Ctrl+C to copy.
Select your range the contains numbers.
Press Ctrl+Alt+V to open the Paste Special dialog.
In the top of the Paste Special dialog, choose Values. In the Operation section, choose Add. Click OK.
Explanation:
4. Why do animals move from one place to another?
Answer:
Animal move from one place to another in search of food and protect themselves from their enemies.They also move to escape from the harsh climate. Animal move from one place to another in search of food,water and shelter.
Answer:
Animals move one place to another because he search food and shelter
Please help me ASAP!
Answer:
security hacker
Explanation:
security hackers are people who hack software to check for vulnerabilities. most of the time security hackers are white hat hackers who work to perform penetration tests to see if a software is secure.
tell me if this is wrong :)
In a spreadsheet what does the following symbol mean?
$
Answer:
$ = dollar sign
Explanation:
In a spreadsheet, the $ symbol is the symbol of the dollar. The dollar is the currency of the United States.
What is currency?Currency is a form of payment for goods and services. In a nutshell, it is money in the form of paper and coins that is usually issued by a government and is generally accepted as a form of payment at face value.
Currency exchange rates differ between businesses because each one distorts the interbank rate to maximize profits. We encounter numerous competitors who post interbank rates internet as bait to attract new customers, but once the customers are onboard, they drastically change the rate, typically not in the customers' favor.
Therefore, the $ symbol represents the dollar in a spreadsheet. The US dollar is the country's currency.
To learn more about a dollar, refer to the below link:
https://brainly.com/question/23899116
#SPJ2
Which of the following is NOT an example of a metasearch engine?
Answer:
Where is the choices mate?
For this assignment your are to implement the Pet Class described in Programming Exercise 1, starting on page 494 in our textbook. Additionally your program will allow users to enter the pet's information until the user enters in the string "quit". Once the user enters quit the program will print out a summary of all the information that has been entered. Your program should not assume any maximum number of pets that can be added. Items in blue designate output. Items in red designate computer input. Example Test Case: Enter name, type and age of your pet: Name: Momo Type: Bird Age: 33 Enter "quit" to stop entering. Anything else to continue. a Enter name, type and age of your pet: Name: Pooh Type: Dog Age: 8 Enter "quit" to stop entering. Anything else to continue. quit SUMMARY: Name: Momo, Type: Bird, Age: 33. Name: Pooh, Type: Dog, Age: 8.
Answer:
ohhhvhhffifyuddfuiicfdguc
Java 2D Drawing Application. The application will contain the following elements:
a) an Undo button to undo the last shape drawn.
b) a Clear button to clear all shapes from the drawing.
c) a combo box for selecting the shape to draw, a line, oval, or rectangle.
d) a checkbox which specifies if the shape should be filled or unfilled.
e) a checkbox to specify whether to paint using a gradient.
f) two JButtons that each show a JColorChooser dialog to allow the user to choose the first and second color in the gradient.
g) a text field for entering the Stroke width.
h) a text field for entering the Stroke dash length.
I) a checkbox for specifying whether to draw a dashed or solid line.
j) a JPanel on which the shapes are drawn.
k) a status bar JLabel at the bottom of the frame that displays the current location of the mouse on the draw panel.
If the user selects to draw with a gradient, set the Paint on the shape to be a gradient of the two colors chosen by the user. If the user does not chosen to draw with a gradient, the Paint with a solid color of the 1st Color.
Note: When dragging the mouse to create a new shape, the shape should be drawn as the mouse is dragged.
Answer:
sadness and depression is my answer
Explanation:
The Internet is written in a "language" called
O Usenet
O package switching
O HTTP
O ARPANET
Answer:
HTTP
Explanation:
I hope it helps u.
Mark Me as brainlist answer
What characteristics should be determined to design a relational database? Check all that apply.
the fields needed
the tables needed
the keys and relationships
the purpose of the database
all of the tables in the database
all of the records in the database
the queries, forms, and reports to generate
Answer: 1,2,3,4,7
Just took it (:
Working with do-while loop
Bring the program dowhile.cpp from the Lab 5 folder.
The code is shown below:
______________________________________________________________________________
// This program displays a hot beverage menu and prompts the user to
// make a selection. A switch statement determines which item the user
// has chosen. A do-while loop repeats until the user selects item E
// from the menu.
// PLACE YOUR NAME HERE
#include
#include
using namespace std;
int main()
{
// Fill in the code to define an integer variable called number,
// a floating point variable called cost,
// and a character variable called beverage
bool validBeverage;
cout << fixed << showpoint << setprecision(2);
do
{
cout << endl << endl;
cout << "Hot Beverage Menu" << endl << endl;
cout << "A: Coffee $1.00" << endl;
cout << "B: Tea $ .75" << endl;
cout << "C: Hot Chocolate $1.25" << endl;
cout << "D: Cappuccino $2.50" << endl <
cout << "Enter the beverage A,B,C, or D you desire" << endl;
cout << "Enter E to exit the program" << endl << endl;
// Fill in the code to read in beverage
switch(beverage)
{
case 'a':
case 'A':
case 'b':
case 'B':
case 'c':
case 'C':
case 'd':
case 'D': validBeverage = true;
break;
default: validBeverage = false;
}
if (validBeverage == true)
{
cout << "How many cups would you like?" << endl;
// Fill in the code to read in number
}
// Fill in the code to begin a switch statement
// that is controlled by beverage
{
case 'a':
case 'A': cost = number * 1.0;
cout << "The total cost is $ " << cost << endl;
break;
// Fill in the code to give the case for tea ( $0.75 a cup)
//Fill in the code to give the case for hot chocolate($1.25 a cup)
// Fill in the code to give the case for cappuccino ($2.50 a cup)
case 'e':
case 'E': cout << " Please come again" << endl;
break;
default:cout << // Fill in the code to write a message
// indicating an invalid selection.
cout << " Try again please" << endl;
}
} // Fill in the code to finish the do-while statement with the
// condition that beverage does not equal (E or e).
// Fill in the appropriate return statement
}
Answer:
it throws an error with the includes.
and some undeclared variables.
Explanation:
please fix that.
What is up with the bots? They are so annoying.
Answer:
very very very annoying
Answer:
yeah
Explanation:
1) Create a class called Villain. Specifically, a Villain has the following fields: .name (String)
a number of evil plans (int) In addition, a Villain has the following methods: • a constructor that accepts an argument for each of the fields . a copy constructor
an equals method, which checks/returns whether all the fields are the same
a toString method
2) Create a class called Crazy Villain, which inherits from Villain. Specifically, a Crazy Villain has the following additional fields:
a crazy laughter (String)
a crazy idea (String In addition, write code for the following Crazy Villain methods:
a constructor that accepts an argument for each of the fields
a toString method that overrides the Villain toString method, in order to include the additional fields You do not need to instantiate/demo Villain or Crazy Villain objects.
Answer:
Explanation:
The following code is written in Java and creates both of the classes as requested with their variables and methods as needed. The crazyVillain class extends the Villain class and implements and overrides the needed variables and methods. Due to technical reasons, I have added the code as a txt file below.
A "Pythagorean Triple" is a set of integers which will make the sides of a right triangle when used in the calculation of Pythagoras’ Theorem. For example, "3, 4, 5" is a Pythagorean Triple. Write a short "C" function that takes three decimal integers and determines if they are a "Pythagorean Triple". The function should return a boolean which is true if the three numbers fit the pattern, and false otherwise. DO NOT write a "main()" method in this code! [15 pts.]
Answer:
The function in C is as follows:
bool checkPythagoras(int a, int b, int c ){
bool chk = false;
if(a*a == b*b + c*c || b*b == a*a + c*c || c*c == b*b + a*a){
chk = true;
}
return chk;
}
Explanation:
This defines the function. It receives three integer parameters a, b and c
bool checkPythagoras(int a, int b, int c ){
This initializes the return value to false
bool chk = false;
This checks if the three integers are Pythagorean Triple
if(a*a == b*b + c*c || b*b == a*a + c*c || c*c == b*b + a*a){
If yes, the return value is updated to true
chk = true;
}
This returns true or false
return chk;
}
Write an algorithm and flowchart to display H.C.F and L.C.M of given to numbers.
Answer:
Write an algorithm to input a natural number, n, and calculate the odd numbers equal or less than n. ... Design an algorithm and flowchart to input fifty numbers and calculate their sum. Algorithm: Step1: Start Step2: Initialize the count variable to zero Step3: Initialize the sum variable to zero Step4: Read a number say x Step 5: Add 1 to the number in the count variable Step6: Add the ..
Explanation:
What are 3 data Gathering method that you find effective in creating interactive design for product interface and justify your answer?
Answer:
In other words, you conducted the four fundamental activities that make up the interaction design process – establishing requirements, designing alternatives, prototyping designs, and evaluating prototypes.
Explanation:
The speed density fuel injection system uses the blank sensor as the primary sensor as the primary sensor to determine base pulse width
A. Map
B TP
C Maf
D baro
Answer:
A) Map
Explanation:
All gasoline (petrol) fuel systems need ways or method that will be calculating amount of the air that is entering the engine.This is true as regards mechanical fuel injection, carburetors and electronic fuel injection.Speed density system fall under one of this method. "Speed" in this context means the speed of the engine while "density" means density of the air. The Speed is been measured using the distributor, crankshaft position sensor could be used here. The Density emerge from from measuring of the air pressure which is inside the induction system, using a typical "manifold absolute pressure" (MAP) sensor as well as air temperature sensor. Using pieces of information above, we can calculate
mass flow rate of air entering the engine as well as the correct amount of fuel can be supplied. With this system,
the mass of air can be calculated. One of the drawback if this system is that
Any modification will result to incorrect calculations. Speed-Density can be regarded as method use in estimation of airflow into an engine so that appropriate amount of fuel can be supplied as well as. adequate spark timing. The logic behind Speed-Density is to give prediction of the amount of air ingested by an engine accurately during the induction stroke. Then this information could now be used in calculating how much fuel is required to be provided, This information as well can be used in determining appropriate amount of ignition advance. It should be noted The speed density fuel injection system uses the Map sensor as the primary sensor to determine base pulse width
Understanding Join Types
Which join type will only include rows where the joined fields from both tables are equal?
O inner join
O left outer join
Oright inner join
O right outer join
Answer: inner join
Explanation:Edg. 2021
What is the purpose of exploring data?
a.
To generate labels for your data.
b.
To gain a better understanding of your data.
c.
To gather your data into one repository.
d.
To digitize your data.
Answer:
b. To gain a better understanding of your data.
Explanation:
A database management system (DBMS) can be defined as a collection of software applications that typically enables computer users to create, store, modify, retrieve and manage data or informations in a database. Generally, it allows computer users to efficiently retrieve and manage their data with an appropriate level of security.
A data dictionary can be defined as a centralized collection of information on a specific data such as attributes, names, fields and definitions that are being used in a computer database system.
In a data dictionary, data elements are combined into records, which are meaningful combinations of data elements that are included in data flows or retained in data stores.
This ultimately implies that, a data dictionary found in a computer database system typically contains the records about all the data elements (objects) such as data relationships with other elements, ownership, type, size, primary keys etc. This records are stored and communicated to other data when required or needed.
Data exploration (mining) can be defined as a process which typically involves extracting and analyzing data contained in large databases through the use of specialized software to generate new information.
The main purpose of data exploration is to gain a better understanding of your data and get to insights faster. Thus, data exploration helps to cut down a large data set into a manageable size through the use of statistical or data visualization tools, thereby, gaining a better understanding of the nature of the data.
Answer:
b. To gain a better understanding of your data.
Explanation:
explore and visualize data to uncover insights from the start or identify areas or patterns to dig into more.
Plz hurry it’s timed
Python The Sieve of Eratosthnes Prgram
A prime integer is any integer greater than 1 that is evenly divisible only by itself and 1. The Sieve of Eratosthenes is a method of finding prime numbers. It operates as follows:
Create a list with all elements initialized to 1 (true). List elements with prime indexes will remain 1. All other elements will eventually be set to zero.
Starting with list element 2, every time a list element is found whose value is 1, loop through the remainder of the list and set to zero every element whose index is a multiple of the index for the element with value 1. For list index 2, all elements beyond 2 in the list that are multiples of 2 will be set to zero (indexes 4, 6, 8, 10, etc.); for list index 3, all elements beyond 3 in the list that are multiples of 3 will be set to zero (indexes 6, 9, 12, 15, etc.); and so on.
When this process is complete, the list elements that are still set to 1 indicate that the index is a prime number. These indexes can then be printed. Write a program that uses a list of 1000 elements to determine and print the prime numbers between 2 and 999. Ignore element 0 of the list. The prime numbers must be printed out 10 numbers per line.
Sample Executions:
Prime numbers between 2 and 999 as determined by the Sieve of Eratosthenes.
2 357 11 13 17 19 23 29
31 37 41 43 47 53 59 61 67 71
73 79 83 89 97 101 103 107 109 113
127 131 137 139 149 151 157 163 167 173
179 181 191 193 197 199 211 223 227 229
233 239 241 251 257 263 269 271 277 281
283 293 307 311 313 317 331 337 347 349
353 359 367 373 379 383 389 397 401 409
419 421 431 433 439 443 449 457 461 463
467 479 487 491 499 503 509 521 523 541
547 557 563 569 571 577 587 593 599 601
607 613 617 619 631 641 643 647 653 659
661 673 677 683 691 701 709 719 727 733
739 743 751 757 761 769 773 787 797 809
811 821 823 827 829 839 853 857 859 863
877 881 883 887 907 911 919 929 937 941
947 953 967 971 977 983 991 997
Answer:
try this
Explanation:
def SieveOfEratosthenes(n):
prime = [True for i in range(n+1)]
p = 2
while (p * p <= n):
if (prime[p] == True):
for i in range(p * p, n+1, p):
prime[i] = False
p +=1
c=0
for p in range(2, n):
if prime[p]:
print(p," ",end=" ")
c=c+1
if(c==10):
print("")
c=0
n= 1000
print("prime number between 2 to 999 as determined by seive of eratostenee ")
SieveOfEratosthenes(n)
Write a function to calculate the distance between two points Distance( x1, y1,x2.2) For example Distance(0.0,3.0, 4.0.0.0) should return 5.0 Use the function in main to loop through reading in pairs of points until the all zeros are entered printing distance with two decimal precision for each pair of points.
For example with input
32 32 54 12
52 56 8 30
44 94 4439 6
5 19 51 91 7.5
89 34 0000
Your output would be:__________.
a. 29.73
b. 51.11
c. 55.00
d. 73.35
e. 92.66
Answer:
The function in Python3 is as follows
def Distance(x1, y1, x2, y2):
dist = ((x1 - x2)**2 +(y1 - y2)**2)**0.5
return dist
Explanation:
This defines the function
def Distance(x1, y1, x2, y2):
This calculates distance
dist = ((x1 - x2)**2 +(y1 - y2)**2)**0.5
This returns the calculated distance to the main method
return dist
The results of the inputs is:
[tex]32, 32, 54, 12 \to 29.73[/tex]
[tex]52,56,8,30 \to 51.11[/tex]
[tex]44,94,44,39\to 55.00[/tex]
[tex]19,51,91,7.5 \to 84.12[/tex]
[tex]89,34,00,00 \to 95.27[/tex]
A security technician is configuring a new firewall appliance for a production environment. The firewall must support secure web services for client workstations on the 10.10.10.0/24 network. The same client workstations are configured to contact a server at 192.168.1.15/24 for domain name resolution.
Required:
What rules should the technician add to the firewall to allow this connectivity for the client workstations
Answer:
Explanation:
Based on the information provided in the question, the best rules that the technician should add to the firewall would be the following
Permit 10.10.10.0/24 0.0.0.0 -p tcp --dport 443
Permit 10.10.10.0/24 192.168.1.15/24 -p udp --dport 53
This is because port 443 is used for "Secure webs services" while UDP port 53 is used for queries and domain name resolution. Both of which are the main configurations that the security technician needs to obtain.
Consolidated Supplies is a medium-sized distributor of restaurant supplies that operates in Canada and several northern U.S. states. They have 12 large warehouses spread across both countries to service their many customers. Products arrive from the manufacturers and are stored in the warehouses until they are picked and put on a truck for delivery to their customers. The networking equipment in their warehouses is old and is starting to give them problems; these problems are expected to increase as the equipment gets older. The vice president of operations, Pat McDonald, would like to replace the existing LANs and add some new wireless LAN technology into all the warehouses, but he is concerned that now may not be the right time to replace the equipment. He has read several technology forecasts that suggest there will be dramatic improvements in networking speeds over the next few years, especially in wireless technologies. He has asked you for advice about upgrading the equipment.
Should Consolidated Supplies replace all the networking equipment in all the warehouses now, should it wait until newer networking technologies are available, or should it upgrade some of the warehouses this year, some next year, and some the year after, so that some warehouses will benefit from the expected future improvements in networking technologies?
Answer:
Consolidated Supplies
Consolidated Supplies should upgrade some of the warehouses this year, some next year, and others the year after, so that some warehouses will benefit from the expected future improvements in networking technologies.
Explanation:
Gradual technology upgrade should be the way forward for Consolidated Supplies. Waiting until newer networking technologies are available is not an option. Total replacement of all the networking equipment in all the warehouses is not an option, as technology equipment becomes obsolete in no time. Overall, Consolidated Supplies should never forget the numerous benefits from technology upgrade, including reduction of downtime, increased productivity, and improved customer services and satisfaction.
Use at Least one hundred words to explain what you did the last time your handheld personal computer went slow.
Answer:
Disk defragmentation
clear up storage
restart the computer
Explanation:
PC's going slow is a very common occurence nowadays and what i had to do to usually fix slow computers is to first use disk defragmentation which will automatically sort our files and put them in the right order.Second is to delete any unnessary files,folders,programs that i no longer use or its just sitting there eating dust and finally my last resort is to restart the pc which usually helps fix most of the issues including slow PCs which might be caused by some errors during startup.
Hope this helped
Describing How to Create a Self-Join Query
Use the drop-down menus to complete the steps for creating a self-join query.
1. Click the
tab.
2. In the Queries group, click Query Design.
3. In the Show Table dialog box, add
4. Click and drag a field from one copy of the table and drop it on the other table.
5. Add the fields to the query.
6. Click
to see the results.
е
Answer:1. Click the ✔ Create tab.
2. In the Queries group, click Query Design.
3. In the Show Table dialog box, add ✔ the same table twice
.
4. Click and drag a field from one copy of the table and drop it on the other table.
5. Add the fields to the query.
6. Click ✔ Run
to see the results.
Explanation:on edg
Describing How to Create a Self-Join Query Use the drop-down menus to complete the steps for creating a self-join query is by 1. Click the tick in the tab to design a Self-Join Query.
Why can we use self be a part of?A self-be a part of is a be a part of that may be used to sign up for a desk with itself. Hence, it's miles a unary relation. In a self-be, a part of, every row of the desk is joined with itself and all of the different rows of the equal desk.
The Query and View Designer assigns an alias to the second one example via way of means of including a sequential wide variety to the desk name. In addition, the Query and View Designer creates a be a part of line among the 2 occurrences of the desk or desk-valued item withinside the Diagram pane.
Read more about the Queries :
https://brainly.com/question/25694408
#SPJ2
Random Star
Write a method named randomStar that takes two parameters, a Random object r and an integer num. The method should keep printing lines of * characters, where each line has between 5 and 19 * characters inclusive, until it prints a line with greater than or equal to num characters. num is guaranteed to be between 5 and 19. For example, the method call randomStar(14) will print:
import java.util.*;
public class RandomStar {
public static void main(String[] args) {
Random r = new Random(2063064142); // ignore the 2063064142
randomStar(r, 12);
System.out.println();
randomStar(r, 19);
}
public static void randomStar(Random r, int num) {
}
}
Answer:
Explanation:
The following code is written in Java. The function takes in the random object and creates a random number where it generates a random number and prints out the * characters, if the random number and the input num are the same it prints out both values and ends the function.
import java.util.Random;
class Brainly {
public static void main(String[] args) {
Random r = new Random();
randomStar(r, 12);
System.out.println();
randomStar(r, 19);
}
public static void randomStar(Random r, int num) {
while (true) {
int randomNum = r.nextInt(19) + 5;
if (randomNum != num) {
for (int x = 0; x < randomNum; x++) {
System.out.print("*");
}
System.out.print("\n");
} else {
for (int x = 0; x < randomNum; x++) {
System.out.print("*");
}
System.out.print("\n");
System.out.println("Random Number: " + randomNum);
System.out.println("Input Number: " + num);
break;
}
}
}
}
Which principle of layout design is shown below