An industrial load with an operating voltage of 480/0° V is connected to the power system. The load absorbs 120 kW with a lagging power factor of 0.77. Determine the size of the capacitor in vars that is necessary to raise the power factor to 0.9 lagging.

Answer:

8.6 ft³/s

Explanation:

The force due to the water jet F = mv where m = mass flow rate = ρQ where ρ = density of water = 62.4 lbm/ft³ and Q = volume flow rate. v = velocity of water jet = 30 ft/s

So, F = mv

F = ρQv

making Q subject of the formula, we have

Q = F/ρv

Since F = force due to water jet = force needed to hold the plate against the water stream = 500 lbf = 500 × 1 lbf = 500 × 32.2 lbmft/s² = 16100 lbmft/s²

Since

Q = F/ρv

Substituting the values of the variables into the equation for Q, we have

Q = F/ρv

Q = 16100 lbmft/s²/(62.4 lbm/ft³ × 30 ft/s)

Q = 16100 lbmft/s²/1872 lbm/ft²s

Q = 8.6 ft³/s

So, the volume flow rate is 8.6 ft³/s.

Answer:

The pseudocode is as follows:

Input SalesAmount

Input CommissionRate

CommissionEarned= SalesAmount * (CommissionRate/100)

Print CommissionEarned

Explanation:

This gets input for SalesAmount

Input SalesAmount

This gets input for CommissionRate

Input CommissionRate

This calculates the CommissionEarned

CommissionEarned= SalesAmount * (CommissionRate/100)

This prints the calculated CommissionEarned

Print CommissionEarned

Explanation:

ask your dad please and use your brain

Answer:

1. Drawing grid.

2. Orthogonal.

3. Geometries.

4. CTRL+N.

5. Thirteen (13).

Explanation:

CAD is an acronym for computer aided design and it is typically used for designing the graphical representation of a building plan. An example of a computer aided design (CAD) software is AutoCAD.

Some of the features of an AutoCAD software are;

1. Drawing grid: is a regular pattern of dots displayed on the screen of an AutoCAD software, which acts as a visual aid and it's also used to define the extent of a drawing.

2. Ortho is short or an abbreviation for orthogonal, which means either vertical or horizontal.

3. Tangent is a point where two geometries meet at just a single point.

4. If you want to create a new drawing, simply press CTRL+N for the short cut key.

5. There are thirteen object snaps (Osnap) that can help you perform your task on AutoCAD easily. The 13 object snaps (Osnap) are; Endpoint, Midpoint, Apparent intersect, Intersection, Quadrant, Extension, Tangent, Center, Insert, Perpendicular, Node, Parallel, and Nearest.

The average power consumption for Eager WiFi, Lazy WiFi, Eager 4G, and Lazy 4G Split is maintained by Screen Mode.

Reducing such a need to move in between multiple tabs, the split-screen has been valuable for increasing wages. In the several instances running a two or more desktop system will allow different programs to run throughout multiple devices. That works with the same process on both PC and laptop monitors.

Just display them side by side, instead of the switching among both the apps that has been used frequently. In this phase, an app that the snap to either left or right occupies a third of the display, and yet another app holds the two-thirds remaining. It refers to Split-Screen Mode.

Similarly, assume that the communication radio for 4G has a power consumption of 190 mW when active and 25 mW when idle. The Idle Power of the CPU is 7 mW, whereas the Active Power of the CPU is 5 mW per unit utilization.

Therefore, The average power consumption for Eager WiFi, Lazy WiFi, Eager 4G, and Lazy 4G Split is maintained by Screen Mode.

Learn more about average power on:

https://brainly.com/question/14831024

#SPJ2

jrjrkeekkekekkwkkakkllalllalallalllalalaallalalaalalalalalallallallllallalalallaaallalallllllallllllllalaalalalaaaaalalaaaaaaalgjgiejxpwunfifjruritiririirieoeowowowowowowowowooeowowowoeeoeowowowowowowowoowowwowowowoozoeisiaokseekxidjdkdjfidjfjdjfjfjrifjrifjdirjdjrjfjrjfjrjfjrfuejwwuxmaneanfjkaosndjxieneamalhaqzeeshanvhorahfuensiwjakaksjdhfhfnfhfndjxnxmakaalalalwlwlwwow

Answer:

The physical topology addresses how devices are connected, while a logical topology addresses how devices actually communicate to one another ( C )

Explanation:

Network physical is simply the process/method of connecting the Network using cables while Logical topology is the general architecture of the communication mechanism in the network for all nodes.

Hence The correct statement is the physical topology addresses how devices are connected, while a logical topology addresses how devices actually communicate to one another

Answer:

Interval:  x∈ ( 0, ∞ )

There are no transient terms

Explanation:

x (dy/dx) – y= x^2sinx

Attached below is the detailed solution of the Given problem

There are no transient terms found in the general solution

Interval:  x∈ ( 0, ∞ )

Answer:

a) 1.9%

b) T2s = 505.5 k = 232.5°C

Explanation:

P1 = 95 kPa

T1 = 27°C  = 300 k

P2 = 600 kPa

T1 = 277°c  = 550 k

Table used : Table ( A - 17 ) Ideal gas properties of air

a) determining the isentropic efficiency of the compressor

Л = ( h2s - h1 ) / ( h2a -  h1 ) ---- ( 1 )

where ; h1 = 300.19 kJ/kg , T1 = 300 K , h2a = 554.74 kJ/kg , T2 = 550 k

To get h2s we have to calculate the the value of Pr2 using Pr1(relative pressure)

 Pr2 = P2/P1 * Pr = ( 600 / 95 ) * 1.306  hence; h2s = 500.72 kJ/kg

back to equation1

Л = 0.019 = 1.9%

b) Calculate the exit temperature of the air if compressor is reversible

if compressor is reversible the corresponding exit temperature

T2s = 505.5 k = 232.5°C

given that h2s = 500.72 kJ/kg

Answer:

Explanation:

Tech Social Media giant FB is one of those companies. Not long ago the ceo was brought to court to accusations that his company was selling user data. Turns out this is true and they are selling their users private data to companies all over the word. Once the news turned to something else, people focused on something new but the company still continues to sell it's users data the same as before. This is completely unethical as the information belongs to the user and they are not getting anything while the corporation is profiting.

Answer:

Each of the metal specimens HAS an indentation near the center to ensure that the fracture point would occur in this region. Tension tests WERE CONDUCTED as follows. Two pieces of reflective tape WERE PLACED approximately 1 inch apart in the center of the specimen where the indentation 4 WAS LOCATED. The width and the thickness of the specimen at this location WAS MEASURED using a Vernier caliper. Then the specimen WAS SECURED in the MTS Load Frame. A laser extensometer WAS PLACED into position to measure the deformation of the specimen. The laser extensometer WAS USED to measure the original distance between the pieces of reflective tape. The MTS WAS SET to elongate the specimen one tenth of an inch every minute.

Answer:

a. unit of length: [L]

b. unit of volume: [[tex]L^3[/tex]]

c. unit of pressure:[tex]P=\frac{F}{A} \equiv\frac{[MLT^{-2}]}{[L^2]}[/tex] [tex][ML^{-1}T^{-2}][/tex]

d. unit of power: [tex]N.m.s^{-1}\equiv [ML^2T^{-3}][/tex]

e. unit of force: [tex][kg.m/s^2]\equiv [MLT^{-2}][/tex]

f. unit of power: [tex]N.m.s^{-1}\equiv [ML^2T^{-3}][/tex]

Force: [tex]F=m.a=m.\frac{v}{t}=m.\frac{x}{t}\div t[/tex]

Power: [tex]P=\frac{W}{t}=\frac{F.x}{t}[/tex]

where:

F = force

A = area

W = work

t = time

a = acceleration

v = velocity

x = displacement

Answer:

International Film Festival

Judging the best best film:

a. The probability that out of five judges (random sample),  three are in favor of film FA is:

= 33%.

b. The demerits of classical probability are:

1. Classical probability can only be used with events that have definite numbers of possible outcomes.  

2. Classical probability can only handle events where each outcome is equally likely.

3. Classical probability is based on the assumption of linear relationship (which is not always true in real life) between the latent variable and observed scores.

Explanation:

a) Number of judges = 11

Number of judges in favor of FA film = 6

Number of judges in favor of FB film = 5

Probability of judges in favor of FA film = 6/11

Probability of judges in favor of FB film = 5/11

Random sample of judges = 5

Probability that out of five judges, three are in favor of film FA = 3/5 * 6/11

= 18/55

= 33%

b) Classical probability is the simple probability showing that each event has equal chance of happening.  It can be contrasted with empirical probability that is obtained from experiments.

Solution :

The spring is expanded by 2 times of the block when it moves down an inclined by x times.

Here, [tex]$x_1$[/tex] = 39 mm

        [tex]x_2[/tex] = 225 mm

a). From the work energy principal,

   Work forces = kinetic energy

[tex]$(mg \sin 50^\circ)\times \frac{99}{1000}-(\mu_k mg \cos 50^\circ) \times \frac{99}{1000} -\frac{1}{2}k(0.225^2 - 0.039^2)=\frac{1}{2}m(V^2_2-0.08^2)$[/tex]

[tex]$(112.6 \times 0.099)-(14.17 \times 0.099)-4.91= 7.5(V^2_2-0.08^2)$[/tex]

[tex]$9.75= 7.5(V^2_2-0.08^2)$[/tex]

[tex]$1.3= V^2_2-0.08^2$[/tex]

[tex]$V_2=1.14\ m/s$[/tex]

b). calculating the distance travelled by the block before it comes to rest.

Substitute the value of [tex]V_2[/tex] in (1),

[tex]$-(\mu_kmg \cos 50^\circ)x + (mg \sin 50^\circ)x-\frac{1}{2}k\left( ( 2x+0.039)^2 - 0.039^2\right)= -\frac{1}{2}m(0.08)^2$[/tex]

[tex]$-14.17x+112.6x - 100(4x^2+0.156x)=-0.048$[/tex]

[tex]$98.43x - 100(4x^2+0.156x)+0.048=0$[/tex]

[tex]$98.43x - 400x^2-15.6x+0.048=0$[/tex]

[tex]$82.83x - 400x^2+0.048=0$[/tex]

[tex]$ 400x^2- 82.83x-0.048=0$[/tex]

x = 0.20 m

Answer:

a)  Vr = - a^2/r cosθ  + aß / r

    Vθ = 1/r [ -a^2/r * sinθ ]

b) attached below

Explanation:

potential function

Ø= a^2 /r  cosØ + aßlnr ----- ( 1 )

a = radius ,  ß = constant

a) Expressions for Vr and Vθ

Vr =  dØ / dr  ----- ( 2 )

hence expression : Vr = - a^2/r cosθ  + aß / r

Vθ = 1/r dØ / dθ ------ ( 3 )

back to equation 1

dØ / dr = - a^2/r sinθ + 0  --- ( 4 )

Resolving equations 3 and 4

Vθ = 1/r [ -a^2/r * sinθ ]

b) expression for stream function

attached below

The values of Is and V are as: (a) [tex]Is = 2.34 \times 10^{-11} A[/tex] and V = 0.581 V. (b) [tex]Is = 4.56 \times 10^{-15} A[/tex] and V = 0.516 V. (c) [tex]Is = 1.18 \times 10^{-16} A\\[/tex] and V = 0.459 V. (d) [tex]Is = 2.34 \times 10^{-11} A[/tex] and V = 0.581 V.

The relation between the current and voltage of a diode is given by the Shockley diode equation. It is an exponential function and can be given by the following equation:

[tex]I = Is \times (e^{V/Vt} - 1)[/tex]

Where

(a)

Given that:

V = 0.700 V

And I = 1.00 A.

Substituting these values in the equation above to get,

[tex]1.00 A = Is \times (e^{0.700 V / 0.025 V} - 1)\\Is = 2.34 \times 10^{-11} A[/tex]

The terminal voltage at 10% of the measured current can be found by substituting I = 0.1 A in the above equation and solving for V as:

V = 0.581 V.

(b)

Given that:

V = 0.650 V

And, I = 1.00 mA.

Substituting these values in the equation above to get,

[tex]1.00 mA = Is \times (e^{0.650 V / 0.025 V} - 1)\\ Is = 4.56 \times 10^{-15} A[/tex]

The terminal voltage at 10% of the measured current can be found by substituting I = 0.1 mA in the above equation and solving for V as:

V = 0.516 V.

(c)

Given that:

V = 0.650 V

And, I = 10 μA.

Substituting these values in the equation above to get,

[tex]10 \mu A = Is \times (e^{0.650 V / 0.025 V} - 1)\\Is = 1.18 \times 10^{-16} A[/tex]

The terminal voltage at 10% of the measured current can be found by substituting I = 1 μA in the above equation and solving for V as:

V = 0.459 V.

(d)

Given that:

V = 0.700 V

And, I = 100 mA.

Substituting these values in the equation above to get,

[tex]100 \ mA = Is \times (e^{0.700 V / 0.025 V} - 1)\\Is = 2.34 \times 10^{-11} A[/tex]

The terminal voltage at 10% of the measured current can be found by substituting I = 10 mA in the above equation and solving for V as:

V = 0.581 V.

So, the values of Is and V are as: (a) [tex]Is = 2.34 \times 10^{-11} A[/tex] and V = 0.581 V. (b) [tex]Is = 4.56 \times 10^{-15} A[/tex] and V = 0.516 V. (c) [tex]Is = 1.18 \times 10^{-16} A\\[/tex] and V = 0.459 V. (d) [tex]Is = 2.34 \times 10^{-11} A[/tex] and V = 0.581 V.

Learn more about Terminal voltage here:

https://brainly.com/question/34372613

#SPJ3

Actions violated:

Actions to be taken:

Edit: Use these to write your paragraph.

Answer:

there are generally two types of toilet bowl types- round and elongated.

Answer:

the current consumed is 3.3 A

Explanation:

Given;

resistance, R = 30 ohms

inductance, L = 200 mH

Voltage supply, V = 230 V

frequency of the coil, f = 50 Hz

impedance, Z = 69.6 Ohms

The current consumed is calculated as;

[tex]I = \frac{V}{Z} \\\\I = \frac{230}{69.6} \\\\I = 3.3 \ A[/tex]

Therefore, the current consumed is 3.3 A

Answer:

The answer is "15 N".

Explanation:

Please find the complete question in the attached file.

In frame B:

For just slipping:

[tex]\to \frac{P}{2} \cos \theta =mg \sin \theta\\\\\to P=2 mg \tan \theta \\\\[/tex]

        [tex]=2 \times 1 \times g \times \tan 37^{\circ}\\\\ =2 \times 10 \times \frac{3}{4}\\\\ =15 \ N[/tex]

Answer:

[tex]\eta_{turbine} = 0.603 = 60.3\%[/tex]

Explanation:

First, we will find actual properties at given inlet and outlet states by the use of steam tables:

AT INLET:

At 4MPa and 350°C, from the superheated table:

h₁ = 3093.3 KJ/kg

s₁ = 6.5843 KJ/kg.K

AT OUTLET:

At P₂ = 125 KPa and steam is saturated in  vapor state:

h₂ = [tex]h_{g\ at\ 125KPa}[/tex] = 2684.9 KJ/kg

Now, for the isentropic enthalpy, we have:

P₂ = 125 KPa and s₂ = s₁ = 6.5843 KJ/kg.K

Since s₂ is less than [tex]s_g[/tex] and greater than [tex]s_f[/tex] at 125 KPa. Therefore, the steam is in a saturated mixture state. So:

[tex]x = \frac{s_2-s_f}{s_{fg}} \\\\x = \frac{6.5843\ KJ/kg.K - 1.3741\ KJ/kg.K}{5.91\ KJ/kg.K}\\\\x = 0.88[/tex]

Now, we will find [tex]h_{2s}[/tex](enthalpy at the outlet for the isentropic process):

[tex]h_{2s} = h_{f\ at\ 125KPa}+xh_{fg\ at\ 125KPa}\\\\h_{2s} = 444.36\ KJ/kg + (0.88)(2240.6\ KJ/kg)\\h_{2s} = 2416.088\ KJ/kg[/tex]

Now, the isentropic efficiency of the turbine can be given as follows:

[tex]\eta_{turbine} = \frac{h_1-h_2}{h_1-h_{2s}}\\\\\eta_{turbine} = \frac{3093.3\ KJ/kg-2684.9\ KJ/kg}{3093.3\ KJ/kg-2416.088\ KJ/kg}\\\\\eta_{turbine} = \frac{408.4\ KJ/kg}{677.212\ KJ/kg}\\\\\eta_{turbine} = 0.603 = 60.3\%[/tex]

Answer: Attached below is the missing detail and Mohr's circle.

i) б1 =  9.6 Ksi

б2 = -10.7 ksi

ii) 10.2 Ksi

iii)  -0.51Ksi

Explanation:

First step :

direct compressive stress on shaft

бd = P / π/4 * d^2

      = -20 / 0.785 * 5^2  = -1.09 Ksi

shear stress at the outer surface due to torsion

ζ = 16*T / πd^3

  = (16 * 250 ) / π * 5^3  = 010.19 Ksi

Calculate the Principal stress, maximum in-plane shear stress and average normal stress

Using Mohr's circle ( attached below )

i) principal stresses:

б1 = 4.8 cm * 2 = 9.6 Ksi

б2 = -5.35 cm * 2 = -10.7 ksi

ii) maximum in-plane shear stress

ζ  = radius of Mohr's circle

   = 5.1 cm = 10.2 Ksi   ( Given that ; 1 cm = 2Ksi )

iii) average normal stress

 = 9.6 + ( - 10.7 ) / 2

  = -0.51Ksi

Answer:

1709.07 ft^3/s

Explanation:

Annual peak streamflow = Log10(Q [ft^3/s] )

mean = 1.835

standard deviation = 0.65

Probability of levee been overtopped in the next 15 years = 1/5

Determine the design flow ins ft^3/s

P₁₅ = 1 - ( q )^15 = 1 - ( 1 - 1/T )^15 = 0.2

                         ∴  T = 67.72 years

Q₁₅ = 1 - 0.2 = 0.8

Applying Lognormal distribution : Zt = mean + ( K₂ * std ) --- ( 1 )

K₂ = 2.054 + ( 67.72 - 50 ) / ( 100 - 50 ) * ( 2.326 - 2.054 )

    = 2.1504

back to equation 1

Zt = 1.835 + ( 2.1504 * 0.65 )  = 3.23276

hence:

Log₁₀ ( Qt(ft^3/s) ) = Zt  = 3.23276

hence ; Qt = 10^3.23276

                  = 1709.07 ft^3/s

Answer:

a) -505.229 kJ/Kg

b) -1.724 kJ/kg

Explanation:

T1 = 400°C

P1 = 3 MPa

P2 = 125 kPa

work output   = 530 kJ/kg

surrounding temperature = 20°C = 293 k

A) Calculate heat transfer from Turbine to surroundings

Q = h2 + w - h1

h ( enthalpy )

h1 = 3231.229 kj/kg

enthalpy at P2

h2 = hg = 2676 kj/kg

back to equation 1

Q = 2676 + 50 - 3231.229  = -505.229 kJ/Kg  ( i.e.  heat is lost )

b) Entropy generation

entropy generation = Δs ( surrounding )  + Δs(system)

                                =  - 505.229 / 293   + 0

                                = -1.724 kJ/kg  

Answer:

embroidery scissor

Explanation:

is small, sharp and pointed good for fine work use trimming scallops,clipping threads,and cutting large eyelets.

hope this helps

Answer:

jsow

hfhcffnbxhdhdhdhdhdhdddhdhdgdhdhdhdhdhdhhhdhdjsksmalalaksjdhfgrgubfghhhhhhh

Explanation:

j

Answer:

Hence the given statement is false.

Explanation:

For low-speed subsonic wind tunnels, the air density remains nearly constant decreasing the cross-section area cause the flow to extend velocity, and reduce pressure. Similarly increasing the world cause to decrease and therefore the pressure to extend.

The speed within the test section is decided by the planning of the tunnel.  

Thus by adjusting the pressure difference won't change the worth of test section velocity.

Answer:

The given statement is false .

Complete Question

Complete Question is attached below.

Answer:

[tex]V'=5m/s[/tex]

Explanation:

From the question we are told that:

Diameter [tex]d=0.10m[/tex]

Power [tex]P=4.0kW[/tex]

Head loss [tex]\mu=10m[/tex]

 [tex]\frac{P_1}{\rho g}+\frac{V_1^2}{2g}+Z_1+H_m=\frac{P_2}{\rho g}+\frac{V_2^2}{2g}+Z_2+\mu[/tex]

 [tex]\frac{300*10^3}{\rho g}+35+Hm=\frac{500*10^3}{\rho g}+15+10[/tex]

 [tex]H_m=(\frac{200*10^3}{1000*9.8}-10)[/tex]

 [tex]H_m=10.39m[/tex]

Generally the equation for Power is mathematically given by

 [tex]P=\rho gQH_m[/tex]

Therefore

 [tex]Q=\frac{P}{\rho g H_m}[/tex]

 [tex]Q=\frac{4*10^4}{1000*9.81*10.9}[/tex]

 [tex]Q=0.03935m^3/sec[/tex]

Since

 [tex]Q=AV'[/tex]

Where

 [tex]A=\pi r^2\\A=3.142 (0.05)^2[/tex]

 [tex]A=7.85*10^{-3}[/tex]

Therefore

 [tex]V'=\frac{0.03935m^3/sec}{7.85*10^{-3}}[/tex]

 [tex]V'=5m/s[/tex]