Air trapped in a cylinder fitted with a piston occupies 142.8 mL at 0.97 kPa pressure.
What is the new volume of air when the pressure is increased to 1.5 kPa by applying force
to the piston?

Answer:

D

Explanation:

D is the answer because 2 is needed to know

Answer:

B) 3 and 7

Explanation:

i just took the test

Answer:

I don't understand the question

Explanation:

what is your name

Answer:

2200 L

Explanation:

There are 22.4 L in 1 mole of neon so if you have 98.2 L, then you have 98.2 mole x (22.4 L/mole) = 2200 L of neon.

Answer:

0.5875L

Explanation:

concentration = mole/ volume

n(LiCl) = 20 / (7 + 35.5) = 0.47 mol

volume = mole / conc.

volume = 0.47 /0.8

= 0.5875 dm³ = 0.5875L

Answer:

Static energy is an energy between two charges.

Explanation:

a). A van de Graff generator builds up a positive electric charge on the dome by separating the negative static electric charges from the positive static charge using a quickly moving belt. The positive charge collects on the large metal dome of the generator. When the charge builds up is large enough, a lighting like spark can shoot from the dome to a grounded discharge rod.

             Like electric charges always repel each other, and oppositely electric charges will attract each other. When the aluminum pans are being charged by the van de Graff generator, then each of them attain the same positive polarity similar with the dome. Thus,  positive charge starts to accumulate over the surface of each of the pie pan. Each aluminum pan repels the others. These repulsive forces between the pans are so strong that they succeed in overcoming the gravity force and thus the top of the pan is pushed away from the generator's dome.

b). Static electricity is produced by a concentration of negative and positive electric charges. Like charges pushes away each other while unlike charges pulls each other.

            Objects generally have same numbers of positive charges as well as negative charges. And if there is any small imbalance in numbers of the charges on the object, it is charged.

            Negative charges easily torn away from the materials like the fur or hair. Also, the negative charges are held on other materials like the plastics. If we rub a plastic rod with fur, the negative charges will get transferred from fur to rod. The rod gets negatively charged and the fur is positively charged. As a result, the rabbit fur and the plastic rod were attracted to each other.

c). Coulomb's law stated that :

  [tex]$F=\frac{KQ_1Q_2}{d^2}$[/tex]    .............(i)

where, [tex]$Q_1$[/tex]  and [tex]$Q_2$[/tex] are the charges of two objects d is the distance between two objects.

As from the above equation, we can say that force of electrical attraction between two objects depends on the charges and the distance between objects.

1. The electrical force between two charged object is inversely proportional to the distance of separation between two objects.

Decreasing separation distance (d) between the objects will increase its attraction force.

2. And, increasing the charges of two objects(+ve and -ve) increases the force of attraction between two objects.

Answer:A

Explanation:

Answer:

[tex]296.05\ \text{K}[/tex]

Explanation:

[tex]m_w[/tex] = Mass of water = 100 g

[tex]c_w[/tex] = Specific heat of water = [tex]4.184\ \text{J/g K}[/tex]

[tex]m_c[/tex] = Mass of copper = 20 g

[tex]c_c[/tex] = Specific heat of copper = [tex]0.385\ \text{J/g K}[/tex]

[tex]\Delta T_w[/tex] = Temperature change in water = [tex](T-295)[/tex]

[tex]\Delta T_c[/tex] = Temperature change in cooper = [tex](353-T)[/tex]

T = Final temperature of the system

The heat balance of the system is given by

[tex]m_wc_w\Delta T_w=m_cc_c\Delta T_c\\\Rightarrow 100\times 4.184\times (T-295)=20\times 0.385\times (353-T)\\\Rightarrow 418400\left(T-295\right)=7700\left(353-T\right)\\\Rightarrow 418400T-123428000=2718100-7700T\\\Rightarrow T=\frac{1261461}{4261}\\\Rightarrow T=296.05\ \text{K}[/tex]

The final temperature of the water is [tex]296.05\ \text{K}[/tex].

The final temperature of the water when placed in a calorimeter is 296.05K

HOW TO CALCULATE FINAL TEMPERATURE:

Where;

Learn more at: https://brainly.com/question/10987564?referrer=searchResults

The question is incomplete, the complete question is;

A student determines the number of moles of water in a

hydrated metal oxide by weighing a clean, dry crucible

and lid while the crucible is empty, then reweighing the

crucible and lid with a sample of the hydrate, heating the

crucible and lid with a Bunsen burner and then

reweighing the crucible and lid with the sample after

cooling to room temperature. Which error will result in

too high a value for the amount of water of hydration?

(A) The heating is conducted only once instead of the

three times recommended by the procedure.

(B) The lid is left off the crucible when it is weighed

with the hydrated oxide.

(C) The metal oxide reacts partially with oxygen in the

air, forming a compound in a higher oxidation state.

(D) Some of the heated oxide is spilled from the crucible

before it can be weighed.

Answer:

(D) Some of the heated oxide is spilled from the crucible

before it can be weighed.

Explanation:

It is possible to determine the number of moles of water in a hydrated metal oxide by weighing a clean, dry crucible and lid while the crucible is empty, then reweighing the crucible and lid with a sample of the hydrate. The crucible and lid with the sample are heated, cooled and reweighed.

As this process is going on, suppose some of the heated oxide is spilled from the crucible, then the mass of heated or anhydrous oxide decreases leading to a consequent increase in the number of moles of water in the hydrated metal oxide, hence the answer above.

The too high a value for the amount of water of hydration error is occur due to heating of given hydrated sample.

Hydrated compounds are those compounds in which water molecule is present with the normal compound.

To get the correct value of weight of hydrated compound, first we have to weigh the empty crucible and lid and then with sample of compound in the crucible and lid. After this substract empty weigh of crucible & lid from the sample-crucible-lid weigh. If we substract the weigh from heated sample crucible and lid, then we get the error because the hydrated water molecule may decompose due to heating and moles of water increases.

Hence, error will occur if we heat the sample.

To know more about hydrated compound, visit the below link:

https://brainly.com/question/16275027

answerA) 100 mL

Explanation:

At constant temperature and number of moles, Using Boyle's law  

Given ,  

V₁ = 200 mL

V₂ = ?

P₁ = 60 kPa

P₂ = 120 kPa

The new volume of the gas is 100mL

Boyle's law is use to calculate the volume of a gas in relation with its pressure. The Boyle's law equation is as follows:

P1V1 = P2V2

Where;

P1 = initial pressure of the gas (torr)

P2 = final pressure of the gas (torr)

V1 = initial volume of the gas (mL)

V2 = final volume of the gas (mL)

According to the information of this question, the pressure on 200mL of a gas changed from 380 torr to 760 torr. Hence;

V1 = 200mL

V2 = ?

P1 = 380torr

P2 = 760torr

Using P1V1 = P2V2

V2 = P1V1/P2

V2 = (380 × 200) ÷ 760

V2 = 76000 ÷ 760

V2 = 100mL

Hence, the new volume of the gas is 100mL

Learn more: https://brainly.com/question/22467228

Answer:

pH = 3.3

Explanation:

Step 1: Given data

Concentration of hydronium ions in the agricultural product ([H₃O⁺]): 4.7 × 10⁻⁴ M

Step 2: Calculate the pH of the agricultural product

We will use the definition of pH.

pH = -log [H₃O⁺]

pH = -log 4.7 × 10⁻⁴

pH = 3.3

Since the pH < 7, the agricultural product is acidic.

Answer:

a

Explanation:

Answer:

The main similarity between carbohydrates, proteins and fats is that they are all used for energy.

Explanation:

I hope this helps, have a blessed day.

Answer:

1. 2 M

2. 2 M

Explanation:

1. Determination of the final concentration.

Initial Volume (V₁) = 2 L

Initial concentration (C₁) = 6 M

Final volume (V₂) = 6 L

Final concentration (C₂) =?

The final concentration can be obtained as follow:

C₁V₁ = C₂V₂

6 × 2 = C₂ × 6

12 = C₂ × 6

Divide both side by 6

C₂ = 12 / 6

C₂ = 2 M

Therefore, the final concentration of the solution is 2 M

2. Determination of the final concentration.

Initial Volume (V₁) = 0.5 L

Initial concentration (C₁) = 12 M

Final volume (V₂) = 3 L

Final concentration (C₂) =?

The final concentration can be obtained as follow:

C₁V₁ = C₂V₂

12 × 0.5 = C₂ × 3

6 = C₂ × 3

Divide both side by 3

C₂ = 6 / 3

C₂ = 2 M

Therefore, the final concentration of the solution is 2 M

Answer: New volume of the solution is 100 mL.

Explanation:

Given: [tex]V_{1}[/tex] = 3 mL,     [tex]M_{1}[/tex] = 200 M

[tex]M_{2}[/tex] = 6 M,     [tex]V_2[/tex] = ?

Formula used to calculate the new volume of solution is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute the values into above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}\\200 M \times 3 mL = 6 M \times V_{2}\\V_{2} = \frac{200 M \times 3 mL}{6 M}\\= 100 mL[/tex]

Thus, we can conclude that new volume of the solution is 100 mL.

The statement, that describes about nuclear fission and nuclear fusion is "both processes can release huge amounts of energy."

Nuclear fission is the process by which an atom's nucleus breaks into two or more smaller nuclei. Nuclear fusion is the process by which two light atomic nuclei merge to produce a single heavier one, releasing huge quantities of energy in the process.

Fusion and fission are both nuclear reactions that yield significant amounts of energy that can be used to generate power. However, fission is the splitting of atoms, whereas fusion is the joining of them.

To put in another way, while both nuclear reactions that generate energy, the methods are vastly different. They both produce a lot of energy.

Hence the correct answer is B.

Learn more about nuclear fission and nuclear fusion here

https://brainly.in/question/47666389

#SPJ2

Answer:it’s not B

Explanation:

Answer:

D

Explanation:

The rest have characteristics of a plant cell

Answer:

Ionization Energy = 9 eV

Explanation:

If we apply the law of conservation of energy to the given situation, we will get the following equation:

[tex]Energy\ of\ Photon = Ionization\ Energy + Kinetic\ Energy\ of\ Electron\\[/tex]

where,

Energy of Photon = 10 eV

Ionization Energy = ?

Kinetic Energy of Electrons = 1 eV

Therefore,

[tex]10\ eV = Ionization\ Energy + 1\ eV\\Ionization\ Energy = 10\ eV - 1\ eV[/tex]

Ionization Energy = 9 eV

Answer:

412 g Cl₂

General Formulas and Concepts:

Atomic Structure

Stoichiometry

Explanation:

Step 1: Define

[Given] 3.50 × 10²⁴ molecules Cl₂

[Solve] grams Cl₂

Step 2: Identify Conversions

Avogadro's Number

[PT] Molar Mass of Cl - 35.45 g/mol

Molar Mass of Cl₂ - 2(35.45) = 70.9 g/mol

Step 3: Convert

Step 4: Check

Follow sig fig rules and round. We are given 3 sig figs.

412.072 g Cl₂ ≈ 412 g Cl₂

Answer:

According to the kinetic molecular theory of gases, the average speed and kinetic energy of gas molecules would INCREASE.

Explanation:

In the kinetic molecular theory of gases, assumptions were made based on macroscopic properties of gas (pressure, volume and temperature) which are as a result of the microscopic properties like the position and the speed of the gas molecules. The kinetic molecular theory explains the behaviour of gases through the following 5 assumptions made about an ideal gas;

--> Molecules of a gas are in constant and rapid motion in straight lines until they collide with one another and with the walls of their containers.

--> The actual volume occupied by the had is negligible compared with the volume of the container.

--> Forces of attraction or repulsion between the molecules of a gas are negligible

--> The collision between the molecules is perfectly elastic.

--> The average kinetic energy of the gas molecules is proportional to the temperature of the gas.

Because gas molecules are in constant motion, it has kinetic energy which can be altered when there is increase in pressure. An increase in pressure will cause gas molecules to collide more frequently with one another. This in turn leads to increase in average speed and the kinetic energy of the individual molecules.

Answer:

Number of moles of photons required = 5.04 × 10⁴ moles

Explanation:

The energy of a photon can be calculated from Planck's equation E = hc/λ

Where h = 6.63 × 10-³⁴ Js and c, the velocity of light = 3.0 × 10⁸ m/s

Energy of one mole of photons = N₀ × hc/λ

wavelength of photon, λ = 520 nm = 5.20 × 10-⁷ m

Energy of one mole of photons = 6.02 × 10²³ × 6.63 × 10−³⁴ × 3 × 10⁸/5.20 × 10-⁷

Energy of one mole of photons = 2.30 × 10⁵ J/mol

Energy required to raise the temperature of a given mass of a substance, E = mcΔT

Where m is mass of substance,  c is specific heat capacity,  ΔT is temperature difference

Mass ofnwternin the pool = volume × density

Volume of water = Volume of swimming pool

Volume of water = 16 × 34 × 6 ft³ = 3264 ft³

1 ft³ = 28316.8 cm³; 3264 ft³ = 28316.8 × 3264 = 92426035.2 cm³

Density of water = 1 g/cm³

Mass of water = 92426035.2 cm³ × 1 g/cm³ = 92426035.2g

ΔT = 80°C - 50°C = 30°C, c = 4.18 J/g/K

Energy required to raise 92426035.2 g water by 30° C = 92426035.2 × 4.18 × 30

Energy required = 1.16 × 10¹⁰ J

Hence, number of moles of photons required = 1.16 × 10¹⁰ J/2.30 × 10⁵ J/mol

Number of moles of photons required = 5.04 × 10⁴ moles

Answer:

11.6 mol O₂

Explanation:

In order to solve this problem we need to convert moles of carbon dioxide (CO₂) into moles of oxygen gas (O₂). To do so we'll use a conversion factor containing the stoichiometric coefficients of the balanced reaction:

Answer:

solution given:

log k=4-[tex] \frac{200}{t} [/tex]

so,

On comparison

∆S°/R = 4

∆ S° = 4R

mousam brother is correct

hope it helps you have a good day

Answer: C not really sure thoo

Answer:

A. it allows results to be reviewed and reproduced by other scientists.