Answer:
A. 4d
Explanation:
Let's begin with the formula for the magnetic field produced by a long wire.
[tex]B = \frac{\mu_0I}{2\pi d}[/tex]
So [tex]d=\frac{\mu_0 I}{2\pi B }[/tex]
at point d_{1} is
[tex]d_{1}=\frac{\mu_{0} i}{2 \pi B_{1}} \\ \frac{d_{1}}{d}=\frac{\frac{\mu_{0} i}{2 \pi B_{1}}}{\frac{\mu_{0} i}{2 \pi B}} \\ d_{2}=d\left(\frac{B}{B}\right) \\ =d\left(\frac{20 \mathrm{mT}}{5 \mathrm{mT}}\right) \\ =4 d[/tex]
Hence, option (A) is correct answer
why the speed of light decreases as it passes from air into another substance?
Answer:
If light enters any substance with a higher refractive index (such as from air into glass) it slows down. The light bends towards the normal line. If light travels enters into a substance with a lower refractive index (such as from water into air) it speeds up. The light bends away from the normal line.
An organ pipe open at both ends has a length of 0.80 m. If the velocity of sound in air is 340 m/s, what is the frequency of the second harmonic of this pipe
Answer:
the frequency of the second harmonic of the pipe is 425 Hz
Explanation:
Given;
length of the open pipe, L = 0.8 m
velocity of sound, v = 340 m/s
The wavelength of the second harmonic is calculated as follows;
L = A ---> N + N--->N + N--->A
where;
L is the length of the pipe in the second harmonic
A represents antinode of the wave
N represents the node of the wave
[tex]L = \frac{\lambda}{4} + \frac{\lambda}{2} + \frac{\lambda}{4} \\\\L = \lambda[/tex]
The frequency is calculated as follows;
[tex]F_1 = \frac{V}{\lambda} = \frac{340}{0.8} = 425 \ Hz[/tex]
Therefore, the frequency of the second harmonic of the pipe is 425 Hz.
The frequency of the second harmonic of the pipe is 425 Hz.
What is the frequency?Frequency is the number of oscillations per second in the sinusoidal wave.
Given is length of the open pipe, L = 0.8 m, and velocity of sound, v = 340 m/s
The wavelength of the second harmonic is represented as
L = A → N + N→N + N→A
where, L is the length of the pipe in the second harmonic, A represents antinode of the wave, N represents the node of the wave
Length = λ/4 +λ/2 +λ/4
Length = λ
The frequency is calculated
frequency = speed of light / wavelength
Put the values, we get
f = 340/0.80
f = 425 Hz
Therefore, the frequency of the second harmonic of the pipe is 425 Hz.
Learn more about frequency.
https://brainly.com/question/25867078
#SPJ5
If a reflected ray is 55 degrees from the normal line, they what is the angle of the
incident ray from normal?
Answer:
xplanation:
Angle of reflection is measured between the incident ray and the angle which it makes with the normal at the point where incident ray strikes the mirror surface.
Further on reflection, it makes the same angle i.e. angle of reflection is equal to angle of reflection.
Hence, as angle of incidence is 55∘ angle of reflection too is 55∘ and the angle between the incident ray and the reflected ray is 55∘+55∘=110∘
Please help me with this question. Every help is appreciated.
Answer:
Change in KE = +1.96×10^4 J while the change in ME = 0 J
Tameika makes a table about sensory organs
Eye
skin
brain
tongue
Which organ should be removed from the table?
A. eye
B. skin
C. brain
D. tongue
Answer:
I think its d
Explanation:
I'm not sure I'm sorry if I'm wrong
Help me please with both questions?
Answer:
question #1 is A
Question #2 is C
Explanation:
If a virtual image is formed 10.0 cm along the principle axis from a convex mirror of focal length-15.0 cm, how far is the object from the mirror
Answer:
U=30cm
Explanation:
All you have to do is to put
Mirror formula , 1/f=1/u + 1/v
You should be careful in sign convention .
Virtual image is negative
we take focal length of convex lens negative even if its not given and so on...
What is the order of the events for the water cycle on a typical warm day?
А
rain, snow, sleet
B
precipitation, evaporation, rain
с
evaporation, condensation, precipitation
D
condensation, evaporation, precipitation
A wave has a frequency of 67 Hz and a wavelength of 7.1 meters. What is the speed of this
wave?
Answer:
475.7 m/s
Explanation:
Given,
Frequency ( f ) = 67 Hz
Wavelength ( λ ) = 7.1 m
To find : Speed ( v ) = ?
Formula : -
v = f λ
v
= 67 x 7.1
= 475.7 m/s
Therefore,
the speed of the wave is 475.7 m/s.
. Estimate the buoyant force that air exerts on you. (To do this, you can estimate your volume by knowing your weight and by assuming that your weight density is a bit less than that of water.)
Answer:
[tex]0.886[/tex] N buoyant force is exerted by air
Explanation:
My weight is [tex]75[/tex] Kg
Weight = mass * gravity
As we know
Buoyant Force is equal to the product of density * acceleration due to gravity and volume of the body
Assuming weight density is a bit less than that of water or equal to water i.e [tex]997.77[/tex] kg/m3
Volume is equal to mass / density
[tex]= 75[/tex] Kg * g/[tex]997.777[/tex]
[tex]= 0.0751[/tex] * g
Buoyant Force
= Volume * g * density
[tex]= 0.0751 * 9.8 * 1.2041[/tex]kg/m3
[tex]= 0.886[/tex] N
An object A with mass 200 kg and an another object B with mass 1000 kg are moving with same speed. The ratio of kinetic energy of object A to B is
Answer:
Ratio of kinetic energy of object A to B = 1:5
Explanation:
Given:
Mass of object A = 200 kg
Mass of object B = 1,000 kg
Find:
Ratio of kinetic energy of object A to B
Computation:
Kinetic energy = (1/2)(m)(v²)
Kinetic energy of object A = (1/2)(200)(v²)
Kinetic energy of object A = (100)(v²)
Kinetic energy of object B = (1/2)(1,000)(v²)
Kinetic energy of object B = (500)(v²)
Ratio of kinetic energy of object A to B = Kinetic energy of object A / Kinetic energy of object B
Ratio of kinetic energy of object A to B = (100)(v²) / (500)(v²)
Ratio of kinetic energy of object A to B = 100 / 500
Ratio of kinetic energy of object A to B = 1/5
Ratio of kinetic energy of object A to B = 1:5
A wave has a wavelength of 1.5 meters and period of 0.083s. What is the waves speed?
A go-cart is traveling at a rate of 25 m/sec for 20 seconds. How far will the go cart travel?
Answer:
Distance travel by go-cart = 500 meter
Explanation:
Given:
Speed of go cart = 25 m/s
Time travel = 20 seconds
Find:
Distance travel by go-cart
Computation:
Distance = Speed x time
Distance travel by go-cart = Speed of go cart x Time travel
Distance travel by go-cart = 25 x 20
Distance travel by go-cart = 500 meter
the number of perpandicular components of a force is
convert 1 day into seconds.(you will need to show your work to receive credit.) please help thank you
Answer:
the answer is 86400seconds.
Explanation:
1day= 24 hours
24hours to seconds =
24×60×60= 86400 seconds.
( 60 second = 1 minutes)
( 60 minutes = 1 hour)
What voltage would be measured across the 15 ohm resistor?
A)
2.5 volts
B)
5.0 volts
C)
7.5 volts
D)
10 volts
Answer:
7.5 volts
Explanation:
I did it on USA Testprep
A 20 ft ladder leans against a wall. The bottom of the ladder is 3 ft from the wall at time t=0 and slides away from the wall at a rate of 2ft/sec. Find the velocity of the top of the ladder at time t=1.
Answer: 0.516 ft/s
Explanation:
Given
Length of ladder L=20 ft
The speed at which the ladder moving away is v=2 ft/s
after 1 sec, the ladder is 5 ft away from the wall
So, the other end of the ladder is at
[tex]\Rightarrow y=\sqrt{20^2-5^2}=19.36\ ft[/tex]
Also, at any instant t
[tex]\Rightarrow l^2=x^2+y^2[/tex]
differentiate w.r.t.
[tex]\Rightarrow 0=2xv+2yv_y\\\\\Rightarrow v_y=-\dfrac{x}{y}\times v\\\\\Rightarrow v_y=-\dfrac{5}{19.36}\times 2=0.516\ ft/s[/tex]
Chris used a non plane mirror to check out an box resting on a shelf. He wanted to find
the focal length of the mirror. The image of the box was located 15 cm behind the mirror
and the box was placed 19 cm from the mirror.
Chris used a non-plane mirror to check out a box resting on a shelf, the focal length of the mirror is mathematically given as
f=8.38cm
What is the focal length of the mirror?Question Parameter(s):
The image of the box was located 15 cm behind the mirror
and the box was placed 19 cm from the mirror.
Generally, the equation for the focal length is mathematically given as
1/f=1/u+1/v
Therefore
1/f=1/15+1/19
f=8.3823529cm
In conclusion, the focal length of the mirror
f=8.3823529cm
Read more about Lens
https://brainly.com/question/13161236
#SPJ2
Are all harmful effects of smoking reversible? Explain your answer.
A phase change is when a substance changes from one state of mind to nother because of the adding or removal of thermal energy
True
False
Answer:
true it all changes
Explanation:
________________________
Please help me with this review question.
Answer:
28.7%
Explanation:
efficiency = work output /work input × 100
What is the approximate surface temperature of the 'White Dwarfs'?.
2,500-5,000 K
5,000-10,000
10,000-15,000 K
15,000 K-35,000 K
Answer:
5,000-10,000 K
Explanation:
make me your brainlist pls
one negative change you may encounter as a student or an employee
Answer:
you may get bullied or teased for being a differrent race, ethnic.
Answer:
Workload
Explanation:
You may feel stressed about a heavier workload or more too do. You will also be paid as an employee unlike, a student.
What is the Lorentz force law used for? A. To find the voltage of a battery B. To find the magnitude of a magnetic force C. To find the velocity of an electromagnetic wave. D. To find the direction of a magnetic field
Answer:
B
Explanation:
The Lorentz force is the sum of the electric force and magnetic force.
F = qE + qvB
qE represents electric force and qvB represents magnetic force
can someone help
pls !
Which one of the statements below is true about mechanical waves?
They must travel in empty space.
They can travel in a vacuum.
Both sound and light are examples of mechanical waves.
They require a medium to travel through.
Answer:
Both sound and waves
Explanation:
Thank me later
NO LINKS PLEASE
At what speed do a bicycle and its rider, with a combined mass of 90 kg
k
g
, have the same momentum as a 1500 kg
k
g
car traveling at 4.0 m/s
m
/
s
?
Answer:
2
Explanation:
A copper wire of resistivity 2.6 × 10-8 Ω m, has a cross sectional area of 35 × 10-4 cm2
. Calculate
the length of this wire required to make a 10 Ω coil.
Answer:
the length of the wire is 134.62 m.
Explanation:
Given;
resistivity of the copper wire, ρ = 2.6 x 10⁻⁸ Ωm
cross-sectional area of the wire, A = 35 x 10⁻⁴ cm² = ( 35 x 10⁻⁴) x 10⁻⁴ m²
resistance of the wire, R = 10Ω
The length of the wire is calculated as follows;
[tex]R = \frac{\rho L}{A} \\\\L = \frac{RA}{\rho} \\\\L= \frac{10 \times (35\times 10^{-4}) \times 10^{-4}}{2.6 \times 10^{-8}} \\\\L = 134.62 \ m[/tex]
Therefore, the length of the wire is 134.62 m.
Please help I will mark you brainliest
I believe the answer is a
The photograph shows part of the Great Plains of North America. How do
plains form?
A. Magma rises at a divergent plate boundary.
B. Tectonic movements make folds and faults in the crust.
C. Continental plates slip past each other at a transform boundary.
D. Water, wind, or glaciers either remove or deposit crust.
SUBMIT
2 PREVIOUS
Answer:
Some plains form as ice and water erodes, or wears away, the dirt and rock on higher land. Water and ice carry the bits of dirt, rock, and other material, called sediment, down hillsides to be deposited elsewhere. As layer upon layer of this sediment is laid down, plains form. Volcanic activity can also form plains.