Answer:
[tex]1.302\ \text{kg/s}[/tex]
Explanation:
[tex]\rho[/tex] = Density of water = [tex]1\ \text{kg/L}[/tex]
[tex]dV[/tex] = Change in volume = [tex]220\times 0.355\ \text{L}[/tex]
[tex]dt[/tex] = Time elapsed = 1 minute = 60 seconds
Mass flow rate is given by
[tex]\dot{m}=\rho\dfrac{dV}{dt}\\ =1\times \dfrac{220\times 0.355}{60}\\ =1.302\ \text{kg/s}[/tex]
The mass flow rate is [tex]1.302\ \text{kg/s}[/tex].
HELP PLEASE
Two 24 ohm resistors are in parallel and placed across a 12 V battery. What is the current in each branch of the circuit?
20 A
0.0125 A
0.5 A
.
Answer:
.5 A
Explanation:
As an admirer of Thomas Young, you perform a double-slit experiment in his honor. You set your slits 1.01 mm apart and position your screen 3.09 m from the slits. Although Young had to struggle to achieve a monochromatic light beam of sufficient intensity, you simply turn on a laser with a wavelength of 639 nm . How far on the screen are the first bright fringe and the second dark fringe from the central bright fringe
Answer:
[tex]0.00195\ \text{m}[/tex]
[tex]0.00293\ \text{m}[/tex]
Explanation:
m = Order = 1
D = Distance between screen and slit = 3.09 m
d = Slit distance = 1.01 mm
[tex]\lambda[/tex] = Wavelength = 639 nm
Distance from the first bright fringe from the central bright fringe is given by
[tex]y=\dfrac{m\lambda D}{d}\\\Rightarrow y=\dfrac{1\times 639\times 10^{-9}\times 3.09}{1.01\times 10^{-3}}\\\Rightarrow y=0.00195\ \text{m}[/tex]
Distance from the first bright fringe from the central bright fringe is [tex]0.00195\ \text{m}[/tex]
Distance from the second dark fringe from the central bright fringe is given by
[tex]y=(m+\dfrac{1}{2})\dfrac{\lambda D}{d}\\\Rightarrow y=(1+\dfrac{1}{2})\dfrac{639\times 10^{-9}\times 3.09}{1.01\times 10^{-3}}\\\Rightarrow y=0.00293\ \text{m}[/tex]
Distance from the second dark fringe from the central bright fringe is [tex]0.00293\ \text{m}[/tex].
follow the chain of energy from a plant to a person riding a skateboard. explain what type of energy is being used at each step.
PLEASE HELP!!!!
Answer:
Answer is in a photo. I can only upload it to a file hosting service. link below!
bit
.ly
/3a
8Nt8
You and a friend are playing with a bowling ball to demonstrate some ideas of Rotational Physics. First, though, you want to calculate the Rotational Kinetic Energy of the bowling ball as it rolls down a sidewalk without slipping. This means it has both linear kinetic energy and rotational kinetic energy. A bowling ball can be modeled as a solid sphere rotating about its center. This bowling ball has a mass of 6.40 kg and a radius of 0.130 m. You'll need to look up the equation for the Moment of Inertia in your textbook. It is rotating with an angular velocity of 16.0 radians / second in the counter-clockwise (or positive) direction. You can use this to determine the linear velocity of the bowling ball (since it is rolling without slipping). What is the Total Kinetic Energy of the bowling ball
Answer:
K_{total} = 19.4 J
Explanation:
The total kinetic energy that is formed by the linear part and the rotational part is requested
[tex]K_{total} = K_{traslation} + K_{rotation}[/tex]
let's look for each energy
linear
[tex]K_{traslation}[/tex] = ½ m v²
rotation
[tex]K_{rotation}[/tex] = ½ I w²
the moment of inertia of a solid sphere is
I = 2/5 m r²
we substitute
[tex]K_{total}[/tex] = ½ mv² + ½ I w²
angular and linear velocity are related
v = w r
we substitute
K_{total} = ½ m w² r² + ½ (2/5 m r²) w²
K_{total} = m w² r² (½ + 1/5)
K_{total} = [tex]\frac{7}{10}[/tex] m w² r²
let's calculate
K_{total} = [tex]\frac{7}{10}[/tex] 6.40 16.0² 0.130²
K_{total} = 19.4 J
In the nitrogen cycle, plants take in nitrates and convert them into
A hunter on a frozen, essentially frictionless pond uses a rifle that shoots 4.20 gg bullets at 970 m/sm/s. The mass of the hunter (including his gun) is 69.5 kgkg, and the hunter holds tight to the gun after firing it. You may want to review (Page) . For related problemsolving tips and strategies, you may want to view a Video Tutor Solution of Collision along a straight line. Part A Find the recoil speed of the hunter if he fires the rifle horizontally.
Answer:
[tex]0.059\ \text{m/s}[/tex]
Explanation:
[tex]m_1[/tex] = Mass of bullet = 4.2 g
[tex]u_1[/tex] = Initial velocity of bullet = 0
[tex]m_2[/tex] = Mass of hunter with rifle = 69.5 kg
[tex]u_2[/tex] = Initial velocity of hunter with rifle
[tex]v_1[/tex] = Final velocity of the bullet = 970 m/s
[tex]v_2[/tex] = Final velocity of the hunter with the rifle
As the momentum of the system is conserved we have
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\Rightarrow v_2=\dfrac{m_1u_1+m_2u_2-m_1v_1}{m_2}\\\Rightarrow v_2=\dfrac{0-0-0.0042\times 970}{69.5}\\\Rightarrow v_2=-0.059\ \text{m/s}[/tex]
The recoil speed of the hunter is [tex]0.059\ \text{m/s}[/tex] in the opposite direction of the bullet.
A woman has one damaged fallopian tube. The damage completely blocks the opening of the tube at the ovary. How will this most likely affect her fertility?
Her likelihood of conceiving will be reduced by at least 50%.
Her eggs, if fertilized, will not implant properly.
Her eggs will not mature inside the ovary.
Her chances of conceiving twins will be doubled.
Answer:Her likelihood of conceiving will be reduced by at least 50%.
Explanation:
EDGE 2020
Answer:
Her likelihood of conceiving will be reduced by at least 50%
Explanation:
took the test on edge, got it right
describe the human condition before Science and technology was practice.
Why is no image formed when an object is at the focal point of a converging lens?
Answer:
the refracted rays neither converge nor diverge. After refracting, the light rays are traveling parallel to each other and cannot produce an image.
Explanation:
Calculate the net force for each of the following:
a.
20 N to the right and 30 N to the right:
Answer and Explanation:
A.
There would be a net force of 50 N going to the right.
Since both forces are going right, they add onto the force amount.
#teamtrees #PAW (Plant And Water)
SEND HELP
Which of these is one of the five determinants of health?
A. The gender of your doctor
B. Your access to health services
C. The type of sport you play
D. The amount
your insurance deductible
Answer:
B
Explanation:
An object has a mass of 50 kg on Earth. What would be the mass of that object in the Moon
It would be 50 kg.
Mass doesn't change.
Weight can.
How does Newton’s first second and third laws apply to eating your breakfast
Answer:
Newton's third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal and opposite force on object A. Notice that the forces are exerted on different objects. However much you push your fork in the food, that much a dent it will cause.
Explanation:
Answer:
¡I hope it helps you! :) .................
why does ice melt faster in water than in oil when both liquids are at the same temperature
Answer:
Because water has a high specific heat, each little bit of water flowing past can give lots of thermal energy to the ice cube. Oil has a smaller specific heat, and so more oil has to flow past to give the same amount of heat energy to the ice cube. ... Colder oil will melt ice less rapidly than warmer oil or water
HELP PLZZZZZ
Vitiligo is an example of a condition that comes from
A. your habits
B. your predisposed genetics
C. your social network
D. your physical environment
Answer:
the answer is b vitiligo is a genetic skin condition
Please PLEASE HELP ASAP
A student placed four objects on a plastic tray: a rock, an eraser, a wood block, and an ice cube. The student slowly lifts the tray and measures the height at which each object begins to slide in order to compare the friction of each object. The table above shows the results. In a separate experiment the student used the same objects and tray, but glued a piece of gritty sandpaper to the tray. What results would be expected? A) The items would slide faster at the same heights. B) The items would start to slide when the tray is not lifted as high. C) The items would not slide at all, no matter how high the tray is raised. D) The tray would need to be raised higher before the items start to slide.
Answer:
D) The tray would need to be raised higher before the items start to slide.
Explanation:
The tray would need to be raised higher due to the gritty sandpaper causing it to have more grip or fraction between the two surfaces. In the first experiment it would have a smooth surface to slide across but in the second experiment it would have a rougher surface to slide across.
Example: It would be like taking two different kinds of shoes like tennis shoes and football cleets. Then seeing which one has more traction when going up a hill.
Hope this helps!!
Which of these is an example of tertiary prevention?
A. Getting screened for skin cancer
B. Avoiding smoking and drinking alcohol
C. Dialysis for damaged kidneys
D. Washing hands
Explanation:
because a tertiary prevention is when the person is already infected with the disease
Diana has just been diagnosed with "pre-diabetes," and her doctor has instructed her to watch her intake of sugar. This is easy at home, but this weekend she will be going to a restaurant with her family. What should she do? (1 point) Order anything on the menu labeled "sugar-free" or "fat-free." Use a phone app to check the sugar content in items or ingredients on the menu. Order something off the salad options and skip the soda or dessert. Split an entrée with a friend to reduce her calorie intake at the meal.
Answer:
sugar free
Explanation:
she should most likely take anything sugar free and avoid any bread, bread can increase your blood level as well, my mother had pre diabetes and what she did was eat salads and drink vegetable smoothies until your sugar goes down. splitting an entrée won't do anything, you technically get the same amount of sugar so at the point just eat the whole meal.
41. 2072 Set E Q.No. 11 A source of sound produces a note of
512 Hz in air at 17°C with wavelength 66.5 cm. Find the ratio
of molar heat capacities at constant pressure to constant
volume at NTP. Densities of air and mercury at NTP are
1.293 kg/m3 and 13600 kg/m3 respectively.
Ans: 1.36
What is the frequency of a wave that has a speed of 500 m/s and a wavelength of 12m?
Answer:
41.7 Hz
Explanation:
Wavelength= velocity/frequency
or
frequency= velocity/Wavelength
f=500/12
f=41.6666
f=41.7 Hz
Please like and rate. Tnks
A car on a roller coaster loaded with passengers has a mass of 2.0 x 10^3 kg. At the lowest point of the the track, the radius of curvature is 24 m and the roller coaster car has a tangential speed of 17 m/s
We have that the is mathematically given as
Fn=36000N
ForceQuestion Parameters:
mass of 2.0 x 10^3 kg
the radius of curvature is 24 m and
the roller coaster car has a tangential speed of 17 m/s
Generally the equation for the Force is mathematically given as
F=ma
Fn-fg=mv^2/r
Fn=m(v^2/r+g)
Therefore
Fn=2000(12^2/18+9.8)
Fn=36000N
For more information on Force visit
https://brainly.com/question/26115859
Lithium was one of the metals studied by the American physicist Robert Millikan in his research on the photoelectric effect. When illuminated with blue light of frequency 6.64 x 10" Hz, the photoelectrons ejected from a lithium surface have a maximum kinetic energy of 0.332 eV. What is the threshold frequency for lithium? For this problem, let the value of Planck's constant, h, be 6.63 x 10J's
Answer:
f = 7.9487 10¹³ Hz
Explanation:
The photoelectric effect was correctly explained by Einstein assuming that the radiation is composed of photons, which behave like particles.
hf = K + Ф
It indicates the frequency and the kinetic energy, let's look for the work function
Ф = hf - K
let's reduce the magnitudes to the SI system
K = 0.332 eV (1.6 10⁻¹⁹ J / 1 eV) = 0.5312 10⁻⁻¹⁹ J
let's calculate
Ф = 6.63 10⁻⁻³⁴ 6.64 10¹¹ - 0.5312 10⁻¹⁹
Ф = 4.40 10⁻²² - 0.5312 10⁻¹⁹
Ф = 5.27 10⁻²⁰ J
for the minimum frequency that produces photoelectrons, the kinetic energy is zero
hf = Ф
f = Ф / h
f = 5.27 10⁻²⁰ / 6.63 10⁻³⁴
f = 7.9487 10¹³ Hz
Fizik
Dua perintang 5 Ω dan 10 Ω disambung selari dengan 9 V bekalan kuasa. Kira kuasa output bekalan kuasa.
Answer:
P = 24.32 W
Explanation:
The question is, "Two resistors 5 Ω and 10 Ω are connected in parallel with a 9 V power supply. Calculate the output power of the power supply.".
The voltage of the power supply, V = 9 V
Resistor 1, R₁ = 5 Ω
R₂ = 10 Ω
The equivalent of parallel combination of resistors is given by :
[tex]\dfrac{1}{R_{eq}}=\dfrac{1}{R_1}+\dfrac{1}{R_2}\\\\\dfrac{1}{R_{eq}}=\dfrac{1}{5}+\dfrac{1}{10}\\\\R_{eq}=3.33\ \Omega[/tex]
The power of the output is given by :
[tex]P=\dfrac{V^2}{R_{eq}}\\\\=\dfrac{9^2}{3.33}\\\\P=24.32\ W[/tex]
So, the output power is equal to 24.32 W.
Question 6.Why does a ball dropped from a certain height not bounce back 1 point
to the same height it was dropped from? *
Answer:
Because the coefficient of restitution is less than 1.
This coefficient is 1 for a perfectly elastic collision.
Some of the energy of the fall is absorbed by the ball so the ball cannot return to its original height.
Also, you have the effects of air resistance and some energy absorption of the the reflecting surface.
Read each example and identify whether the data are observations or inferences from observations. The fish’s ventral fin measured 8.5 cm long.
Answer:
Observation
Inference
Inference
Observation
Inference
Explanation:
Speed and time play a major factor in:
Scrimmage
Tactical movement
Situation awareness
Drill
Answer:
Tactical movement
Explanation:
Speed and time play a significant factor in Tactical movement. The correct option is B.
What is a Tactical movement?Tactical movement refers to the coordinated and strategic movement of military units or teams to achieve a specific objective. It is a fundamental aspect of military operations and involves the use of various tactics and techniques to move troops and equipment safely and efficiently on the battlefield.
Tactical movement can involve various modes of transportation, such as on foot, in vehicles, or by air. It also involves the use of cover and concealment to avoid detection by the enemy, and the use of communication and signal systems to coordinate movements and maintain situational awareness.
The success of the tactical movement depends on many factors, including the terrain and weather conditions, the size and composition of the units involved, the available resources and equipment, and the tactics and strategies employed by both friendly and enemy forces. It requires careful planning, training, and execution to ensure that the movement is successful and achieves the desired outcome.So, tactical movement is an essential component of military operations, and plays a critical role in achieving victory on the battlefield.
Here in the Question,
Tactical movement refers to the movement of military units or teams in a coordinated and strategic manner to achieve a specific objective. In such movements, speed and time are critical factors because they determine the success or failure of the mission. The speed of movement can help to surprise the enemy, take advantage of a weakness in their defense, or seize a key position before they can respond. Time is also important because the longer it takes to achieve the objective, the more likely the enemy is to detect and counter the movement. Therefore, tactical movement requires careful planning and execution to ensure that the right units move at the right speed and at the right time to achieve the desired outcome.
Therefore, the correct option is B i.e Tactical movement.
To learn about Kinetic energy click:
https://brainly.com/question/26472013
#SPJ2
An 85-year-old woman who was having trouble breathing checked into the hospital. There, her heart stopped beating and doctors determined she suffered heart failure. After being resuscitated, she was in a coma and had no brain function. Her family then made the difficult decision to take her off life support, and the woman passed away.
Which order of events did the woman experience?
brain death Right arrow. clinical death Right arrow. somatic death
somatic death Right arrow. brain death Right arrow. clinical death
clinical death Right arrow. brain death Right arrow. somatic death
clinical death Right arrow. somatic death Right arrow. brain death
Answer:c
Explanation:
clinical death Right arrow. brain death Right arrow. somatic death this order of events did the woman experience. Hence option C is correct.
What is death ?The permanent end of all biological activities that support an organism is defined as death. Death may also be defined as the permanent cessation of functioning of the entire brain, including the brainstem, in creatures with a brain, and brain death is frequently used as a legal definition of death.Normally, the remnants of a previous creature begin to degrade quickly after death. Death is an unavoidable process that happens in all species. Turritopsis dohrnii, for example, is physiologically immortal. They can, however, perish from causes other than ageing.
It has been difficult to determine when someone has died. Initially, death was defined as the cessation of breathing and heartbeat.
To know more about Death :
https://brainly.com/question/31108171
#SPJ3.
please help asap
Ms. Brando’s students are studying forces. She has assigned a fun task: designing a balloon car. The students must design a car and see which model will travel the greatest distance. The basic design of the cars can be seen here. First the balloon is inflated and attached to the car. It is important to keep the balloon closed. Once attached to the car, the stem of the balloon is opened and air rushes out through the straw. The air goes one way; the car moves in the other direction. There are no restrictions on the design other than the students must use the materials given to them by Ms. Brando. What is the source of the force that moves the car? A) The circumference of the balloons. B) The friction between the wheels and the track surface. C) The air rushing out of the balloon through the straw. D) The mass of the car: the lighter the car the farther it moves.
Answer: a
Explanation:
when a car dives on a road it a makes friction but it need something to push it or start it which is the balloon in this example
(sorry if im wrong)
Will give brainliest!!
How much KClO3 is needed to make a saturated solution in 100 mL of water at 70⁰ C?
Answer:
iam not sure but I think its NaNO3
what does chucking do for your memory
Answer:
By separating disparate individual elements into larger blocks, information becomes easier to retain and recall. This is due mainly to how limited our short-term memory can be. ... Chunking allows people to take smaller bits of information and combine them into more meaningful, and therefore more memorable, wholes.