Answer:
[tex]\huge\boxed{\sf 1.6\ units = 14.4p}[/tex]
Explanation:
Since,
1 kWh = 1 unitSo,
1.6 kWh = 1.6 units
If,
1 unit = 9p1.6 units = 9p × 1.6
1.6 units = 14.4p
[tex]\rule[225]{225}{2}[/tex]
How do light waves differ from sound waves?
Answer:
Light waves are electromagnetic waves while sound waves are mechanical waves. :)
Spring constant here for 22 cm spring is 50 N per metre 840 if you stretch the spring and when is measured again is 32 cm long what is the size of this force
A car starts from rest and coasts down a hill with a constant acceleration.If it goes 90m in 8s,find the acceleration and velocity after 8s.
The power in a circuit is 2 W and the voltage is 20 VDC. What's the circuit current?
Answer:
Power in the circuit is 0.1 amp
Explanation:
The power in the circuit is given by the formula
P = V x I
Where P is Power, V is voltage supplied and I is current in circuit.
so, I = P/v
= 2/20
=0.1 A
Study more about power
https://brainly.in/question/1063947
A duck has a mass of 2.70 kg. As the duck paddles, a force of 0.110 N acts on it in a direction due east. In addition, the current of the water exerts a force of 0.220 N in a direction of 47.0° south of east. When these forces begin to act, the velocity of the duck is 0.120 m/s in a direction due east. Find (a) the magnitude and (b) the direction (relative to due east) of the displacement that the duck undergoes in 2.70 s while the forces are acting. (Note that the angle will be negative in the south of east direction.)
a) The magnitude will be 0.838m
b) The displacement will be -17.35°
What is displacement?The path covered by an object from its initial point to final point.
Forces acting on the duck
x-axis: 0.13 + 0.16*cos(-56°) = 2.7 * ax
ax = 0.0813 m/s^2
y-axis: 0.13*sin(-56°) = 2.7 * ay
ay = -0.0491 m/s^2
The displacement on the x-axis
X = Vox * t + ax/2 * t²
X = 0.12* 3.2 + 0.0813/2*3.2²
X = 0.8
The displacement on the y-axis:
Y = Voy * t + ay/2 * t²
X = 0 - 0.0491/2*3.2²
Y=-0.25m
So, the magnitude and angle of this displacement [0.8,-0.25] is:
0.838m at an angle of -17.35°
For more displacement related question visit
https://brainly.com/question/11934397
#SPJ1
WHOEVER ANSWERS FIRST WILL BE MARKED BRAINLIEST!
On the fret board the encircled ? represents which note
A. A flat
B. A sharp
C. C sharp
D. E Flat
Answer:
B. A sharp
Explanation:
Microscopes are used to study the structures of rocks. Over time, microscopes have become more and more powerful.
As a result of this technological improvement, our structural information of rocks
As a result this technological improvement, our structural information of rocks has improved greatly.
What is a petrographic microscope?A petrographic microscope is a type of optical microscope that is used to identify rocks and minerals in very thin sections and also to investigate microscopic textures and features that are present in minerals and rocks.
This has improved greatly recent structural information about rocks.
Hence, microscopes used in the study of structures of rocks has overtime improved greatly our structural information about them
Learn more about structure of rocks here:
https://brainly.com/question/20151682
#SPJ1
Answer:
B is the correct answer.
Explanation:
According to the law of conservation of energy, which changes would INCREASE the total energy of a system?
A. An addition of 400 J of thermal energy and a loss of 550 J of kinetic energy
B. An addition of 200 J of thermal energy and a loss of 550 J of thermal energy
C. An addition of 300 J of GPE and a loss of 450 J of thermal energy
D. An addition of 500 J of kinetic energy and a loss of 450 J of thermal energy
The changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.
What is conservation of energy?The term conservation of energy means that energy can not be created nor destroyed.
In this case, the changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.
Learn more about conservation of energy:https://brainly.com/question/2137260
#SPJ1
The radius of a nucleus is about 1/10000 that of an atom.
Calculate the radius of a magnesium nucleus.
Give your answer in standard form.
The radius of a magnesium atom is 0.160nm. The radius of a nucleus is about 1/10000 that of an atom.
What is nucleus?The nucleus is an organelle that contains the DNA i.e. genetic material and other materials which is required for cellular processes. It is only found in eukaryotic cells that is responsible for controlling the processes of the cell.
So we can conclude that the radius of a magnesium atom is 0.160nm which is equals to about 1/10000 radius of that atom.
Learn more about radius here: https://brainly.com/question/24375372
#SPJ1
Why is digital forensics important?
Hi! digital forensics is important because not only does digital forensics allow cyber security organisations to develop technologies that can prevent hackers from accessing devices, websites and networks but can lead businesses in the direction of understanding exactly what data is compromised.
Study the image.
Which of the following choices best explains how the lever made the task easier?
The final force on the rock was the same as the original force from the person and the distance the rock traveled was smaller than the original distance the lever moved, so the total work decreased.
The final force on the rock was greater than the original force from the person and the distance the rock traveled was smaller than the original distance the lever moved, but the total work remained the same.
The final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.
The final force on the rock was greater than the original force from the person and the distance the rock traveled was the same as the original distance the lever moved, so the total work increased.
The final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.
What is the law of conservation of energy?The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.
The total work done on the process will be conserved.
The lever is a simple machine which makes work easier by reducing the force applied to the load and increasing the distance traveled by the load.
Thus, the final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.
Learn more about lever here: https://brainly.com/question/416386
#SPJ1
3. Two wires increase in length by the same amount when both their temperatures increase by the same amount, as shown in the diagram. Before the temperature increase, the longer wire is 1.2525 m long. The shorter wire’s linear coefficient of thermal expansion is 1.135 times that of the longer wire. How much shorter is the shorter wire before the temperature increase? Answer to three significant figures
Viết cho Ngọc Khánh
Two wires increase in length by the same amount when both their temperatures increase by the same amount, the shortness of the wire before the temperature increase is mathematically given as
dL=0.1485m
How much shorter is the shorter wire before the temperature increase?Generally, the equation for change in length is mathematically given as
[tex]dl=lo \alpha dt[/tex]
Therefore
dl1=dl2
Where
a2=1.35a1
Hence
a1l1dt= a2l2dt
a1(1.2525)= a1*(1.135)(l2)
L2=1.104m
In conclusion, a change in length due to temperature is
dL=1.2525-1.104m
dL=0.1485m
Read more about Temperature
https://brainly.com/question/13439286
#SPJ1
8. Ella wants to replace old bulbs of her home with new LED bulbs. She buys LED bulb that has inbuilt AC to DC converter of output 5V and 2.5A. a. If the LED is 75% efficient, what would be the power dissipated? b. Find the work done by the LED when it is connected to the power supply and left for 1hour 15 minutes.
The power dissipated by the LED is 20 Watts and the work done for 1 hour 15 minutes is 56.25 kJ.
What is electrical power?Electrical power is the rate at which electrical work is done.
Electrical power = voltage × currentThe LED is 75% efficient means that 75% of power dissipated by the LED is converted to light.
Total power dissipated = 5 × 2.5 = 12.5 Watts
Work done = power × time (in seconds)Work done = 12.5 × (1 × 3600 + 15 × 60)
Work done = 56250 J = 56.25 kJ
Therefore, the power dissipated by the LED is 20 Watts and the work done for 1 hour 15 minutes is 56.25 kJ.
Learn more about electrical power and work done at: https://brainly.com/question/23901751
#SP1
Which dog has the most kinetic energy? A. A dog of mass 12 kg running with speed 6 m/s B. A dog of mass 10 kg running with speed 3 m/s C. A dog of mass 16 kg running with speed 5 m/s D. A dog of mass 14 kg running with speed 4 m/s
Answer:
A
Explanation:
KE = 1/2 m v^2
the greatest is A
how much force is required to accelerate an 8.6kg wagon by 15 m/s ?
The amount of force required to accelerate the given mass of the wagon is 129 Newtons.
What is force?A force is simply referred to as either a push or pull of an object resulting from the object's interaction with another object.
From Newton's Second Law, force is expressed as;
F = m × a
Where is mass of object and a is the acceleration.
Given the data in the question;
Mass of the rock m = 8.6kgAcceleration a = 15m/s²Force F = ?F = 8.6kg × 15m/s²
F = 129kgm/s²
F = 129N
Therefore the amount of force required to accelerate the given mass of the wagon is 129 Newtons.
Learn more about force here: brainly.com/question/27196358
#SPJ1
Is the ability to discriminate between two close objects.
Answer:
resolution
Explanation:
That is the definition of resolution
3. Harris is putting in a three-phase Y-Y-
connected transformer bank and the
secondary line-to-line voltage is 208 V.
What's the line-to-neutral voltage?
O A. 120 V
O B. 359 V
C. 69 V
O D. 240 V
120V is the line-to-neutral voltage .
What is Line Voltage ?It is defined as the voltage of a power transmission circuit or distribution circuit up to the point of transformation or utilization.
The secondary line voltage is [tex]V_{L} = 280 V[/tex]
The notation AC indicates that the current is an alternating current.
The given formula is [tex]V_{ph} = \frac{V_{L} }{\sqrt{3} }[/tex]
Substitute 208 V into the formula
[tex]V_{ph} = \frac{V_{L} }{\sqrt{3} } \\\\V_{ph} = \frac{208V}{\sqrt{3} } \\\\= 120 (Approx)[/tex]
So, the line-to-neutral voltage is 120 V.
learn more about line voltage :https://brainly.com/question/22598217
#SPJ1
sketch an electric field pattern around two identical negative point charges shown below in the figure of class 11 model question physics.
Answer:
fv nfv f n f vjrkfv frnv thrfn htrfn vt
Explanation:
v ntv tfrv tn vtv jr4v t5o vtv tv tv
Why is the contribution of the wavelets lying on the back of secondary wave front zero?
Answer:
The contribution of the wavelets lying on the back of the wave front is zero because of something known as the Obliquity Factor. It is assumed that the amplitude of the secondary wavelets is not independent of the direction of propagation, Sources: byju's.com
According to the Voigt and Kirchhoff's law for wavelets, the contribution of a wavelet in any direction making an angle x with the normal to the wavelet is proportional to {1+cos(x)/2)}
For wavelet lying on the back of secondary wavefront,
x = 180°→ So, the proportional factor:
→ {1+cos(180°)/2}
→ (1-1/2)
→ (0/2)
→ 0
That's why the contribution of the wavelets lying on the back of secondary wave front is zero
Three sticks are arranged to form a right triangle. If the lengths of the three sticks are 0.47 m, 0.62 m and 0.78 m, what are the three angles of the triangle?
The angles in the triangle are 91 degrees, 53 degrees and 36 degrees respectively.
What is the cosine rule?From the cosine rule we know that;
c^2 = a^2 + b^2 - 2abcosC
Since;
a = 0.47 m
b = 0.62 m
c = 0.78 m
Then;
(0.78)^2 = (0.47)^2 + (0.62)^2 - 2(0.47 * 0.62)cosC
0.61 = 0.22 + 0.38 - 0.58 cosC
0.61 - ( 0.22 + 0.38) = - 0.58 cosC
0.01 = - 0.58 cosC
C = cos-1(0.01/-0.58)
C = 91 degrees
Using the sine rule;
b/Sin B = c/Sin C
0.62/sinB = 0.78/sin 91
0.62/Sin B = 0.78
B = sin-1 (0.62//0.78)
B = 53 degrees
Angle A is obtained from the sum of angles in a triangle;
180 - (91 + 53)
A = 36 degrees
Learn more about triangle:https://brainly.com/question/2773823
#SPJ1
Classify each characteristic as either a metal or a nonmetal.
shiny surface
dull surface
good conductor of electricity
good conductor of heat
poor conductor of electricity
poor conductor of heat
malleable
brittle
Answer:
metal, non, metal, metal, non, non, metal, non
Explanation:
knowledge
A marble rolls off a tabletop 1.15 m high and hits the floor at a point 4 m away from the tables edge in the
horizontal direction.
a. How long is the marble in the air?
b. What is the speed of the marble when it leaves the tables edge?
Im/s
C. What is its speed when it hits the floor?
A marble rolls off a tabletop 1.15 m high and hits the floor at a point 4 m away from the edge of the table in the horizontal direction,
t= 0.45 seconds.V=2.22m/sVT=4.95 m/sThis is further explained below.
What is its speed when it hits the floor...?Generally, the equation for motion is mathematically given as
S= ut + 0.5at²
Therefore
y = Voy t + 0.5gt^2
1 = 0.5x 98 x 6²
1=4.9t^2
[tex]t=\sqrt{0.2041 }[/tex]
t= 0.45 seconds.
b) Horizontal motions are uniform.
V=Horizontal displacement/time
V=1/0.45
V=2.22m/s
C)
Vx: 2.22 m/s At bottom,
Vy² = Voy² + 2as
Vy² = 2x95x1
Vy² = 19.6
Total velocity
[tex]VT=\sqrt{( 2.22 m/)^2+19.6}[/tex]
VT=4.95 m/s
Read more about Arithmetic
https://brainly.com/question/22568180
#SPJ1
Kinetic energy is energy that is stored and not moving
O True
O False
I need help with this question (open-ended question) 50 points (NO BOTS!!!)
Choose TWO locations below (A, B, C) and provide a two-sentence weather forecast for that location. Your forecast must include Wind direction, general wind speed (high, moderate, low) general temperatures (cold, cool, mild, warm, hot), and sky conditions(precipitation/stormy, sunny cloudy).
The weather forecast for the locations includes:
London - 21°C°, Precipitation: 60%, Humidity: 79%, Wind: 11 km/h.
New York - 26°C°, Precipitation: 50%, Humidity: 76%, Wind: 19 km/h.
What is weather?It should be noted that weather is the state of the atmosphere with respect to heat or cold, calm or storm, clearness or cloudiness.
Weather forecast is an analysis of the state of the weather in an area with an assessment of the likely developments.
Learn more about weather on:
https://brainly.com/question/17922964
#SPJ1
Define 1 volt. Express it in terms of SI unit of work and charge calculate the amount of energy consumed in carrying a charge of 1 coulomb through a battery of 3 V.
Answer:
Work done =3 joules
Explanation:
1 volt is the same as 1 Coulomb and 1 Joule
V=W/Q
1=W/3
W=3 x 1
W=3 Joules
How much weight can be placed on the spring so that the end of the spring is 2m above the ground?
The weight must be 288N placed on the end of the spring when it is 2m from the ground.
What is gravitational potential energy?If an object is lifted, work is done against gravitational force. The object gains energy.
Given is a spring has a spring constant of 48 N/m. The end of the spring hangs 8 m above the ground. The final height of weight above the ground, h =2m
Using Hooke's law, expressed as
Force, F = k (x₂-x₁).
Put the values, we get
F = 48 (8-2)
F = 288 N
This force applied on the spring is equal to the weight placed on the spring.
Weight W= 288N.
Thus, the weight must be 288N.
Learn more about gravitational potential energy.
https://brainly.com/question/3884855
#SPJ1
Calculate the current through the ammeter (look at photo)
Answer:
6 amps
Explanation:by Kirchhoff's loop rule the current at any point in the loop must be equal or charge would be building up. The current at the ammeter is equally to the total current through the sun of the paths in parallel which it is in series with
A car of mass 500 kg is moving at a speed of 1.2 m/s. A man pushes the car, increasing the speed to 2 m/s. How much work did the man do?
A. 1360 J
B. 360 J
C. 640 J
D. 1000 J
Answer:
Option B - 360 J
Explanation:
One of the formulas used to find out how much work was done is :
E = 0.5×m×v² (where m is the mass and v is the velocity)
Now we substitute values from the question and simplify :
E = 0.5×500×1.2²
E = 250×1.2²
E = 250×1.44
E = 360 J
So our answer is Option B
Hope this helped and have a good day
ten-story building has identical stairs throughout its stairways. A student calculates the amount of work required to climb one set of stairs and the amount of work to climb the entire ten sets.
Which quantity will remain constant in this experiment?
Answer:
c
Explanation:
Discuss how wind energy was used in ancient times.
Answer:
People used wind energy to propel boats along the Nile River as early as 5,000 BC. By 200 BC, simple wind-powered water pumps were used in China, and windmills with woven-reed blades were grinding grain in Persia and the Middle East.
Explanation:
Hope it helps you:)))))
have a good day