Answer:
v=s/t
s=vt
t=s/v
t=(120×10‐³)/172.8
(the distance meters has been changed to kilometres)
t=1/1440 hrs
Given ,
Please help me, I beg you
Answer:
40g
Explanation:
Solubility of Copper sulfate at 90°=60g
Solubility of potassium bromide at 90°=100g
100g-60g=40g
When solar energy is converted to thermal energy, how is the thermal energy used? Check all that apply.
to provide air conditioning
to cool refrigerators
to heat spaces in buildings
to heat water
Answer:
to heat spaces in buildingss
Explanation:
Imagine driving down the road and you suddenly doubled your velocity. What then happens to your overall kinetic energy?
it is halved
it remains unaffected
it is doubled
it is quadrupled
En un recipiente con mercurio (13.6 gr/cm3) se sumerge completamente un cuerpo de 900 gramos de masa. AL medir su peso aparente este marca 2.94 newton en el dinamómetro. Cual es la densidad del cuerpo (kg/m3)
Answer:
ρ = 20.4 kg / m³
Explanation:
For this exercise we use Archimedes' principle, the thrust on a submerged body is equal to the weight of the released liquid
B = ρ g V_liquid (1)
let's write the equilibrium equation
F -W + B = 0
B = W -F
let's calculate
B = 0.900 9.8 - 2.94
B = 5.88 N
From equation 1
V_{liquid} = [tex]\frac{B}{\rho_{Hg} g}[/tex]
V_{liquid} = [tex]\frac{5.88}{13.6 \ 10^3 \ 9.8}[/tex]
V_{liquid} = 4.41176 10⁻⁵ m³
in this case it is indicated that the body is completely submerged
V_body = V_liquid = V
the definition of density is
ρ = m / V
ρ = [tex]\frac{0.900 \ 10^{-3}}{ 4.41176 \ 10^{-5} }[/tex]
ρ = 2.04 10¹ kg / m³
ρ = 20.4 kg / m³
Will most likely cause the formation of a Mountain
A. Divergent boundary
B. Convergent boundary
C. Transform boundary
Answer:
Convergent boundaries. When two plates collide and one is pushed over the other, forming a mountain.
Which stretch focuses on stretching the glutes and hamstrings while laying on your back?
Question 4 options:
Knee to hip
Bent knee
Knee to Chest
Chest flies
tyyyyyyyy
Answer:
knee to chest
Explanation:
I took the test
Answer:
C. Knee to chest.
on
Draw
3. The weight of a body varies from location to location. Where would the weight of the
body be least
On the moon
At sea level on earth
On top of Mount Everest
In space
4. We meet many different types of force every day. Some of these are shown in the list
below. However, one of these is NOT a force. Which one is it?
A
Speed
B
Push
C
Pull
Friction
Answer:
it's C a pull friction
Explanation:
because it's all said in the explained
Which is a characteristic of the part of the atom marked "A"?Which is a characteristic of the part of the atom marked "A"?Which is a characteristic of the part of the atom marked "A"?Which is a characteristic of the part of the atom marked "A"?Which is a characteristic of the part of the atom marked "A"?
Answer:
its c
Explanation:
just did it
Answer:
c
Explanation:
Ocean breezes are due to which method of heat transfer?
A. conduction
B. convection
C. greenhouse gases
D. radiation
E. geothermal energy
Ocean breezes are primarily due to convection, which is the transfer of heat through the movement of fluids or gases. The correct option is B.
What is convection?Convection is a method of heat transfer that occurs in fluids (liquids and gases) and involves the movement of material carrying thermal energy. In convection, heat is transferred by the movement of hot fluid from one place to another, which then causes the transfer of heat from the hot fluid to the cooler fluid or surface it comes into contact with.
Convection can occur in two ways:
Natural convection: It occurs due to the density differences caused by temperature variations within a fluid. When a fluid is heated, its density decreases, making it lighter and causing it to rise. As it rises, it cools, becomes denser and falls back down, creating a cycle that is known as a convection current.
Forced convection: In this type of convection, a fluid is forced to flow over a surface or through a channel, by an external agent like a fan or pump. The forced flow enhances the rate of heat transfer from the surface or through the channel, as compared to natural convection, where the fluid flow is driven only by buoyancy forces.
Convection is a very important process for heat transfer in many natural and industrial applications, including heating and cooling systems, meteorology, oceanography, and more.
Here in the Question,
Ocean breezes are primarily due to convection, which is the transfer of heat through the movement of fluids or gases. As the sun heats up the surface of the ocean, the air above it also heats up and rises. This creates a low pressure area that draws in cooler air from over the land, resulting in a breeze that blows from the ocean towards the shore. This is why sea breezes are generally felt during the day, when the land is warmer than the sea, and why they tend to die down at night, when the opposite occurs.
Therefore, The correct answer is B i.e convection.
To learn about the difference between conduction and convection click:
https://brainly.com/question/13104912
#SPJ7
There is concern that extra additives in detergents can
have negative health and environmental impacts. Is
it wise to use detergents containing these additives?
Answer:
Look below.
Explanation:
If additives are having negative effects on health and the environment, it would be wise to not use detergents containing these additives. These additives could threaten living things such as humans and animals.
There is concern that extra additives in detergents can have negative health and environmental impacts, then it would be very unwise to use detergents containing these additives
What is pollution?It can be defined as the origination of the contaminant substance that poisonous or harmful to our natural environment.
There are several types of pollution that exist in our nature depending on the state and composition of the contaminant, for example, water pollution can exist due to the eutrophication process.
It would be quite unwise to use surfactants that include these additional ingredients since there is fear that they might have a harmful influence on your well-being and the environment.
To learn more about pollution from here, refer to the link;
brainly.com/question/23857736
#SPJ2
whenever velocity increases the kinetic energy will ?
Answer:
It will increase.
Explanation:
Because kinetic energy is proportional to the square of the velocity, when velocity is doubled, kinetic energy is quadrupled. Kinetic energy K=mv^2/2
What type of energy is energy in the form of motion.
Answer:
the answer is kinetic energy
Please help Solve! I need help!
Question:
Jermaine runs exactly 2 laps around a 400-meter track. What is the displacement?
Multiple choice answers (I need help I don't understand I don't know what the answer is PLEASE HELP ME):
a. 200
b. 800
c. 400
d. 0
D
Explanation
Given,
Distance covered in 1 lap = 400m
= Distance covered in 2 laps = 400 × 2
=800m
If Jermaine runs 2 whole laps, she comes back to her starting point.
So the answer is 0m
If a microwave oven is rated at 2400 watts and it is connected at a 120 volt
outlet, how much current does it use?
A. 2280 amps
B. 0.05 amps
C. 20 amps
D. 288,000 amps
Please answer this ASAP
Answer:
c. 20 amps.
just divide the watts by the volts
Alfred is studying a substance that is made out of only one element. This means that
Answer: A pure substance is something that occurs in nature. An element is made up of one type of atom only and cannot be split further. A compound has the combined properties of the elements from which it is made. Atoms show the macro properties of an element.
HELP PLEASE!!!!!!!!!!!!!!!
In which situation is there NO work being done?
Answer:
d
Explanation:
A boom is to be dropped from moving helicopter on the ground. Explain how can it hut the target ?
Answer:
A bomb that is dropped from a moving helicopter doesn't fall directly downward rather it follows the parabolic path as it were thrown horizontally from a height with certain initial velocity. Therefore, the bomb should be dropped from farther distance equal to the horizontal range before the helicopter reaches above the target.
What is the correct reason for blinking / flickering of stars? Explain it.
A) The blasts in the stars.
B) Absorption of star light by the atmosphere.
C) Motion of the stars.
D) Changing refractive index of gases in the atmosphere.
plz suggest me a answer which can give me 3 marks
Answer:
d. changing refractive index of gases in the atmosphere
Explanation:
light from a star passes through the atmosphere to reach our eyes. however, the layers of gases in the atmosphere are in constant motion, so the light gets bent and appears to be flickering.
i hope this helps! :D
...he...
2- A diver on Saturn's moon Titan is 50 m below the surface of a lake of liquid
methane.
(a) what is the increase in pressure on him due to his depth in the methane? The
density of liquid is 420 kg/m3. the gravitational field on Titan is 1.4 N/kg.
[2]
(6) we are told that the pressure of the atmosphere on Titan is 1600 mbar. What is
the total pressure on the diver (in kPa)
[2]
This problem has been solved! See the answer A 21.5 kg person climbs up a uniform 85 N ladder. The upper end of the ladder rests on a frictionless wall. The bottom of the ladder rests on a floor with a rough surface. The angle between the horizontal and the ladder is 59 ◦. The person can climb 78 % up the ladder before the base of the ladder slips on the floor. What is the coefficient of static friction µs between the base of the ladder and the floor? The acceleration of gravity is 9.8m/s 2 .
Answer:
μ = 0.179
Explanation:
For this exercise we use the rotational equilibrium condition, where we set a reference system at the top of the ladder where it is in contact with the parent, we will assume the counterclockwise rotations as positive
∑ τ = 0
W_stairs x/2 + W_man x’+ fr y - N x = 0
fr y = -W_stairs x/2 - W_man x’ + N x
let's use trigonometry for distances
* the man up the ladder 78%
l ’= 0.78 L
cos 59 = x ’/ l’
x’= 0.78 L cos 59
* the horizontal distance
cos 59 = x / L
x = L cos 59
* vertical distance
sin 59 = Y / L
y = L sin 59
we substitute
fr L sin 59 = -W_stairs Lcos59 / 2 - W_man 0.78 L cos59 + N L cos59
fr sin 59 = - ½ W_stairs cos 59 - 0.78 W_man cos 59 + N cos 59
fr = ctan 59 (N - ½ W_stairs - 0.78 W_man) (1)
Let's write the translational equilibrium equations
Y axis
N -W_stairs - W_man = 0
N = W_stairs + W_man
N = 85 + 21.5 9.8
N = 295.7 N
we substitute in 1
fr = ctg 59 (295.7 - ½ 85 - 0.78 21.5 9.8)
fr = 0.6 (295.7 - 42.5 - 164.346)
fr = 52.89 N
the expression for the friction force is
fr = μ N
μ = fr / N
μ = 52.89 / 295.7
μ = 0.179
2 kg
T2
5 kg
2.1.1 State Newton's Second Law of Motion in words.
.1.2 Draw a labelled free body diagram for the 2 kg mass.
1.3 Determine the magnitude of the tension force T2.
1.4 Calculate the magnitude of the normal force exerted on the 2 kg mass,
Answer:
2500 and kg its is very easy do with method
How is blue colour made?
Answer:
In terms of the light spectrum, blue is a primary color, which means that it is one of the base colors that exist in the universe and it cannot be created by combining different colors together. The primary pigment colors are cyan, magenta, and yellow. Cyan absorbs red, yellow absorbs blue, and magenta absorbs green.
Explanation:
Hope this helped Mark BRAINLEST!!!
Define one solar day
Answer:
the time between successive meridian transits of the sum at a particular place
An experiment is carried out to measure the extension of a rubber band for different loads.
Complete question is;
An experiment is carried out to measure the extension of a rubber band for different loads.
The results are shown in the image attached.
What figure is missing from the table?
Answer:
17.3 cm
Explanation:
The image attached showed values for load, extension and initial length.
Now, the first length there is 15.2 cm and as such it's corresponding extension is 0 because it has no preceding measured length.
The second measured length is 16.2 cm. Since it's initial measured length is 15.2 cm, then the extension has a formula; final length - initial length.
This gives: 16.2 - 15.2 = 1 cm
This corresponds to what is given in the table.
For the next measured length, it is blank but we are given the extension to be 2.1 cm. Now, since the initial measured length is 15.2 cm.
Thus;
2.1 cm = Final length - 15.2 cm
Final length = 15.2 + 2.1
Final length = 17.3 cm
(FOR SCIENCE)fill in the blank with the words ok the top!!!!!
If a special type of ice has a specific heat capacity of 2060 J/kg K. How
much heat must be absorbed by 2.6 kg of ice at -27.00 C to raise it up to
0.00 C, before any melting takes place?
A. 140,000 J
B. 290,000 J
C. 56,000 J
D. None of the above
Answer:
Q = 144612 Joules.
Explanation:
Given the following data;
Mass = 2.6 kg
Initial temperature = -27°C to Kelvin = 273 + (-27) = 246K
Final temperature = 0°C to Kelvin = 273K
Specific heat capacity = 2060 J/kgK.
To find the quantity of heat absorbed;
Heat capacity is given by the formula;
[tex] Q = mcdt[/tex]
Where;
Q represents the heat capacity or quantity of heat.
m represents the mass of an object.
c represents the specific heat capacity of water.
dt represents the change in temperature.
dt = T2 - T1
dt = 273 - 246
dt = 27 K
Substituting the values into the equation, we have;
[tex] Q = 2.6*2060*27[/tex]
Q = 144612 Joules.
A 78-kg skydiver has a speed of 62 m/s , what is the kinetic energy?
Answer:
149,916J
Explanation:
Pneumonic device: Kevin is half-mad and very square
this translates to: KE=(1/2)mv^2 !!
KE=(1/2)(78)(62^2)
KE=(39)(3844)
KE=149,916 Joules
Answer:
it's 149916
Explanation:
Formula = 1/2 x m x v^2
so if you put into your calculator 1/2 x 78 x 62^2
you get 149916
A 0.035 bullet strikes a 5kg wooden block that is stationary and gets stuck inside the block. The block and bullet move together at 8.6 m/s. What is the initial velocity of the bullet?
Answer:
1240 m/s
Explanation:
[Do you mean 0.035 kg bullet?]
Since the momentum of the system is conserved,
Let u m/s be the initial velocity of the bullet
0.035u = 8.6(5+0.035)
u ~= 1237.1714 m/s
u = 1240 m/s (3 sig. fig.)
what is virtual image
Answer:
Virtual images are images that are formed in locations where light does not actually reach. Light does not actually pass through the location on the other side of the mirror; it only appears to an observer as though the light is coming from this location.
Explanation: