A lamp has the shape of a parabola when viewed from the side. The lamp is centimeters wide and centimeters deep. How far is the light source from the bottom of the lamp if the light source is placed at the focus

Answer:

Option (c)

Explanation:

In a Series circuit, as the components are connected end-to-end ,the current can flow through only one path from start to finish.

(C.) is the only correct statement in the list of choices.

In a series circuit, the current can flow through only one path from start to finish.

Answer:

-transform plate boundary

- false

Explanation:

Distance = speed × time

d = (340 m/s) (9.6 s)

d = 3264 m

Answer:

It bends away from the normal

Explanation:

From Snell's law of Refraction, when a ray passes from a medium of lower Refractive index to a medium with higher Refractive index, the Refractive ray will bend towards the normal. However, when the ray passes from a medium of higher Refractive index to a medium of lower Refractive index, the Refractive ray will bend away from the normal.

Now, from the question we are told that Light passes from a material with index of refraction 1.3 into one with index of refraction 1.2.

This means from a higher Refractive index to a lower one and from Snell's law as earlier said, the refracted ray will bend away from the normal

The refracted ray is seen to bend away from the normal.

Let us recall that an optically denser medium will have a higher refractive index. This means that the medium with a refractive index of  1.3  is the denser medium and the medium with a refractive index of  1.2 is the less dense medium.

From the statement in the question, we can boldly say that light is travelling from a denser to less dense medium given the values of the refractive index given. When light is travelling from a denser to a less dense medium, the refracted ray bends away from the normal.

Learn more: https://brainly.com/question/1445383

Answer:

analyze data without drawing conclusions

Explanation:

Research reports are written in order to communicate clearly, information obtained primarily from research and analysis of data.

Typical reports of scientific research endeavours are written in such a way that they convey the research process succinctly without excessive extraneous information. A report is typically made up of; summary of the contents, introduction/ background, methods, results, discussion, conclusion and recommendations.

Hence a report does not really make inferences from the research findings.

Answer:

The position on the y-axis where the magnetic field is zero is at y = 10 cm

Explanation:

The magnetic field B due to a long straight wire carrying a current, i at a distance R from the wire is given by

B = μ₀i/2πR

Now, let y be the point where the magnetic fields of both wires are equal.

So, the magnetic field due to wire 1 carrying current i₁ = 73 A is

B₁ = μ₀i₁/2π(y - 3) and

the magnetic field due to wire 2 carrying current i₂ = 31 A is

B₂ = μ₀i₂/2π(13 - y)

At the point where the magnetic field is zero, B₁ = B₂. So,

μ₀i₁/2π(y - 3) = μ₀i₂/2π(13 - y)

cancelling out μ₀ and 2π, we have

i₁/(x - y) = i₂/(13 - y)

cross-multiplying, we have

(13 - y)i₁ = (y - 3)i₂

Substituting the values of i₁ and i₂, we have

(13 - y)73 = (y - 3)31

949 - 73y = 31y - 93

Collecting like terms, we have

949 + 93 = 73y + 31y

1042 = 104y

dividing through by 104, we have

y = 1042/104

y = 10.02 cm

y ≅ 10 cm

So, the position on the y-axis where the magnetic field is zero is at y = 10 cm

Answer:

The velocity is 40 ft/sec.

Explanation:

Given that,

Force = 3200 lb

Angle = 30°

Speed = 64 ft/s

The resistive force with magnitude proportional to the square of the speed,

[tex]F_{r}=kv^2[/tex]

Where, k = 1 lb s²/ft²

We need to calculate the velocity

Using balance equation

[tex]F\sin\theta-F_{r}=m\dfrac{d^2v}{dt^2}[/tex]

Put the value into the formula

[tex]3200\sin 30-kv^2=m\dfrac{d^2v}{dt^2}[/tex]

Put the value of k

[tex]3200\times\dfrac{1}{2}-v^2=m\dfrac{d^2v}{dt^2}[/tex]

[tex]1600-v^2=m\dfrac{d^2v}{dt^2}[/tex]

At terminal velocity [tex]\dfrac{d^2v}{dt^2}=0[/tex]

So, [tex]1600-v^2=0[/tex]

[tex]v=\sqrt{1600}[/tex]

[tex]v=40\ ft/sec[/tex]

Hence, The velocity is 40 ft/sec.

Answer:

8 possible combinations

Assuming R 1, R 2 and R 3 be three different Resistance

1- all three in series

2-all three in parallel

3- R 1 and R 2 in series and parallel with R 3

​

4-R 1 and R 3 in series and parallel with R 2

​

5-R 2 and R 3 in series and parallel with R 1

​

6- R 1 and R 2

in parallel and series with R 3

​

7-R 1 and R 3 in parallel and series with R 2

​

8-R 2 and R 3 in V with R 1

​

The image in the attachment describes the situation of the fishing rod.

Answer: F = 10.8 N

Explanation: The image shows a fishing rod attached to an axis. To stay in equilibrium, Torque must be equal for the force of magnitude 18N and for the unknow force.

Torque (τ) is a measure of a force's tendency to cause rotation and, in physics, defined as:

τ = F.r.sin(θ)

F is the force acting on the object;

r is distance between where the torque is measured to where the force is applied;

θ is the angle between F and r;

For the fishing rod:

[tex]\tau_{1} = \tau_{2}[/tex]

[tex]F_{1}.r_{1}.sin(\theta) = F_{2}.r_{2}.sin(\theta)[/tex]

Assuming part (1) is related to unknown force:

[tex]F = \frac{F_{2}.r_{2}.sin(\theta}{r_{1}.sin(\theta) }[/tex]

Replacing the corresponding values:

[tex]F = \frac{18*1.8*sin(30)}{3*sin(30)}[/tex]

[tex]F = \frac{18*1.8}{3}[/tex]

F = 10.8

The fishing line exert on the the rod a force of 10.8N.

Answer:

The AC generator has one unbroken slip ring

Explanation:

In physics, the application of electromagnetic induction can be seen in generators and dynamos. Electromagnetic induction is the process of generating electricity using magnets. It found applications in generators and the types of generator they found application is in AC and DC generator.

An AC generator is also called a Dynamo. A DC generator contains what is called a SPLIT RING fixed to the end of the coil which can be separated and coupled back according to the name "split". An AC generator also called a Dynamo makes use of a SLIP ring which cannot be divided into two. It comes as an entity. The presence of this rings is what differentiates a DC generator from an AC generator.

We can replace split rings with slip rings when converting a DC generator to an AC generator and vice versa.

It can therefore be concluded that the difference between a DC and an AC generator is that the AC generator has one unbroken slip ring.

Answer:

A) it transforms a small force acting over a large distance into a large force acting over a small distance.

Explanation:

The hydraulic lever works based on Pascal's law of transmission of pressure through a fluid. In the hydraulic lever, the pressure transmitted is the same.

Pressure transmitted P = F/A

where F is the force applied

and A is the area over which the force is applied.

This pressure can be manipulated on the input end as a small force applied over a small area, and then be transmitted to the output end as a large force over a large area.

F/A = f/a

where the left side of the equation is for the output, and the right side is for the input.

The volume of the displaced fluid will be the same on both ends of the hydraulic lever. Since we know that

volume V = (area A) x (distance d)

this means that the the piston on the input smaller area of the hydraulic lever will travel a greater distance, while the piston on the larger output area of the lever will travel a small distance.

From all these, we can see that the advantage of a hydraulic lever is that it transforms a small force acting over a large distance into a large force acting over a small distance.

Answer:

[tex]r=4.24\times 10^{11}\ m[/tex]

Explanation:

Given that,

Orbital time period, T = 3.75 earth years

Mass of star, [tex]m=3.23\times 10^{30}\ kg[/tex]

We need to find the radius of the exoplanet's orbit. It is a concept of Kepler's third law of motion i.e.

[tex]T^2=\dfrac{4\pi^2}{GM}r^3[/tex]

r is the radius of the exoplanet's orbit.

Solving for r we get :

[tex]r=(\dfrac{T^2GM}{4\pi^2})^{1/3}[/tex]

We know that, [tex]1\ \text{earth year}=3.154\times 10^7\ \text{s}[/tex]

So,

[tex]r=(\dfrac{(3.75\times 3.154\times 10^7)^2\times 6.67\times 10^{-11}\times 3.23\times 10^{30}}{4\pi^2})^{1/3}\\\\r=4.24\times 10^{11}\ m[/tex]

So, the radius of the exoplanet's orbit is [tex]4.24\times 10^{11}\ m[/tex].

Answer:

so the probability will be = 0.062

Standard deviation =  0.8925

Explanation:

The probability of rain = 15% = 15/100= 0.15

and the probability of no rain=q = 1-p= 1-0.15= 0.85

The number of trials = 7

so the probability will be

7C3 * ( 0.15)^3 (0.85)^4= 35* 0.003375 * 0.52200 =0.06166= 0.062

Taking this as binomial as the p and q are constant and also the trials are independent .

For a binomial distribution

Standard deviation = npq= 0.15 *0.85 *7= 0.8925

Answer:

The film thickness is 4.32 * 10^-6 m

Explanation:

Here in this question, we are interested in calculating the thickness of the film.

Mathematically;

The number of fringes shifted when we insert a film of refractive index n and thickness L in the Michelson Interferometer is given as;

ΔN = (2L/λ) (n-1)

where λ is the wavelength of the light used

Let’s make L the subject of the formula

(λ * ΔN)/2(n-1) = L

From the question ΔN = 8 , λ = 540 nm, n = 1.5

Plugging these values, we have

L = ((540 * 10^-9 * 8)/2(1.5-1) = (4320 * 10^-9)/1 = 4.32 * 10^-6 m

Answer:

E. None of these statements are true.

Explanation:

We can't say the exact or approximate amount of tension on the rope, since we do know for sure from the statement who is winning.

for A, the tension on the rope does not depend on if both teams pull are in equilibrium.

for B, the 49ers would be pulling with a force more than 5000 N, if they were winning. The problem is that we can't say with all confidence that they'd be winning.

for C, we don't know how much tension exists on the rope, and its direction, so we can't work out how much tension the 49ers are pulling the rope with.

for D,  just as for C above, we can't work out how much tension there is on the rope, since we do not know how much force the 49ers are pulling with.

we go with option E.

Answer:

60 Ω

Explanation:

R(com) = 15 Ω

1/R(com) = 1/R1 + 1/R2 + 1/R3 ..... + 1/Rn

1/15 = 1/20 + 1/R2

1/R2 = 1/15 - 1/20

1/R2 = (4 - 3) / 60

1/R2 = 1/60

R2 = 60 Ω

así, la combinada de resistencia necesaria es 60 Ω

Answer:

692 J/kg/°C

Explanation:

Electric energy added = amount of heat

Power × time = mass × SHC × increase in temperature

Pt = mCΔT

(15 V × 3 A) (10 min × 60 s/min) = (0.6 kg) C (85°C − 20°C)

C = 692 J/kg/°C

Answer:

Change in the frequency (in Hz) = 104.96 Hz

Explanation:

Given:

Speed of sound in air (v) = 343 m/s

Speed of car (v1) 36 m/s

Frequency(f) = 500 Hz

Find:

Change in the frequency (in Hz)

Computation:

Frequency hear by the observer(before)(f1) = [f(v+v1)] / v

Frequency hear by the observer(f1) = [500(343+36)] / 343

Frequency hear by the observer(f1) = 552.48 Hz

Frequency hear by the observer(after)(f2) = [f(v-v1)] / v

Frequency hear by the observer(f2) = [500(343-36)] / 343

Frequency hear by the observer(f2) = 447.52 Hz

Change in the frequency (in Hz) = f1 - f2

Change in the frequency (in Hz) = 552.48 Hz - 447.52 Hz

Change in the frequency (in Hz) = 104.96 Hz

Answer:

b. approaches infinity

Explanation:

Because Capacitive reactance is given as Xc = 1/ωC

​

So we can see that the value of capacitive reactance and therefore its overall impedance (in Ohms) decreases to zero as the frequency increases acting like a short circuit.

Same as the frequency approaches zero or DC, the capacitors reactance increases to infinity, acting like an open circuit which is why capacitors block DC

Answer;

26.45cm

See attached file for explanation

Answer:

The direction of net magnetic force on the circular section of the loop is in the positive y-axis

The net magnetic force on the circular section of the loop is 3.74 N

Explanation:

The magnetic field strength [tex]B[/tex] = 1.7 T

the current [tex]I[/tex] = 0.7 A

The diameter of the loop = 2 m

the length of the circular section of the semi-circular loop [tex]l[/tex] = πd/2

==> [tex]l[/tex] = (3.142 x 2)/2 = 3.142 m

The force on the semi-circular is given as

F = [tex]BIl[/tex] sin ∅

but the loop is perpendicular to the field, therefore

sin ∅ = sin 90° = 1

F = 1.7 x 0.7 x 3.142 x 1 = 3.74 N

The right hand rule states that "if the fingers of the right hand are held parallel to each other in the direction of the magnetic field, and the thumb is held at right angle to the other fingers in the direction of the flow of current. The palm will push in the direction of the magnetic force on the conductor".

According to the right hand rule, the direction of net magnetic force on the circular section of the loop is in the positive y-axis

Answer:

n= speed of light in vacuum/ speed of light in the other medium.

Explanation:

If light is moving from medium 1 into medium 2 where medium 1 is vacuum (approximated to mean air) and we are required to find the velocity of light; then we can confidently write;

n= speed of light in vacuum/ speed of light in the other medium.

Hence;

n= c/v

Where;

n= refractive index of the material

c= speed of light in vacuum

v = speed of light in another medium.

Note that the refractive index is the amount by which a transparent medium decreases the speed of light.

Answer:

6.13 seconds

Explanation:

At the peak of the fireworks trajectory, the velocity of the firework would be zero. Using equation of motion, we have:

v² = u² + 2gh

0 = 40² - (2)(9.81)(h)

0 = 1600 - 19.62h

19.62h = 1600

h = 1600/19.62

h = 81.55 m

Now during the process of explosion, the two parts gained equal vertical momentum but in opposite directions.

We are told the first piece lands in a time of 2.71 s,

Using 3rd equation of motion, we have;

h = ut + ½gt²

81.55 = u(2.71) + ½(9.81 × 2.71²)

81.55 = 2.71u + 36.0228

2.71u = 81.55 - 36.0228

2.71u = 45.5272

u = 45.5272/2.71

u = 16.8 m/s

The time it takes a projectile to return back to its original launch point assuming the projectile was launched

vertically with speed u = 16.8 m/s is;

t = 2u/g

t = (2 × 16.8)/9.81

t = 3.43 s

Thus total time it takes the second mass to reach the ground = 3.43 + 2.71 = 6.13 seconds

Thw question is not complete. The complete question is;

Charge of uniform linear density (6.7 nCim) is distributed along the entire x axis. Determine the magnitude of the electric field on the y axis at y = 1.6 m. a. 32 N/C b. 150 NC c 75 N/C d. 49 N/C e. 63 NC

Answer:

Option C: E = 75 N/C

Explanation:

We are given;

Uniform linear density; λ = 6.7 nC/m = 6.7 × 10^(-9) C/m

Distance on the y-axis; d = 1.6 m

Now, the formula for electric field with uniform linear density is given as;

E = λ/(2•π•r•ε_o)

Where;

E is electric field

λ is uniform linear density = 6.7 × 10^(-9) C/m

r is distance = 1.6m

ε_o is a constant = 8.85 × 10^(-12) C²/N.m²

Thus;

E = (6.7 × 10^(-9))/(2π × 1.6 × 8.85 × 10^(-12))

E = 75.31 N/C ≈ 75 N/C

Answer:

A. 990v/m

B.330x10^-8T

C.2.19x10^-6J/m³

D.1.45x10^-11J

Explanation:

See attached file

Answer:

The current is  [tex]I = 8.9 *10^{-5} \ A[/tex]

Explanation:

From the question we are told that

     The  radius is [tex]r = 3.17 \ mm = 3.17 *10^{-3} \ m[/tex]

      The current density is  [tex]J = c\cdot r^2 = 9.00*10^{6} \ A/m^4 \cdot r^2[/tex]

      The distance we are considering is  [tex]r = 0.5 R = 0.001585[/tex]

Generally current density is mathematically represented as

          [tex]J = \frac{I}{A }[/tex]

Where A is the cross-sectional area represented as

         [tex]A = \pi r^2[/tex]

=>      [tex]J = \frac{I}{\pi r^2 }[/tex]

=>    [tex]I = J * (\pi r^2 )[/tex]

Now the change in current per unit length is mathematically evaluated as

        [tex]dI = 2 J * \pi r dr[/tex]

Now to obtain the current (in A) through the inner section of the wire from the center to r = 0.5R we integrate dI from the 0 (center) to point 0.5R as follows

         [tex]I = 2\pi \int\limits^{0.5 R}_{0} {( 9.0*10^6A/m^4) * r^2 * r} \, dr[/tex]

         [tex]I = 2\pi * 9.0*10^{6} \int\limits^{0.001585}_{0} {r^3} \, dr[/tex]

        [tex]I = 2\pi *(9.0*10^{6}) [\frac{r^4}{4} ] | \left 0.001585} \atop 0}} \right.[/tex]

        [tex]I = 2\pi *(9.0*10^{6}) [ \frac{0.001585^4}{4} ][/tex]

substituting values

        [tex]I = 2 * 3.142 * 9.00 *10^6 * [ \frac{0.001585^4}{4} ][/tex]

        [tex]I = 8.9 *10^{-5} \ A[/tex]

Answer: E = 39.54 N/C

Explanation: Electric field can be determined using surface charge density:

[tex]E = \frac{\sigma}{2\epsilon_{0}}[/tex]

where:

σ is surface charge density

[tex]\epsilon_{0}[/tex] is permitivitty of free space ([tex]\epsilon_{0} = 8.85.10^{-12}[/tex][tex]C^{2}/N.m^{2}[/tex])

Calculating resulting electric field:

[tex]E=E_{1} - E_{2}[/tex]

[tex]E = \frac{\sigma_{1}-\sigma_{2}}{2\epsilon_{0}}[/tex]

[tex]E = \frac{[0.3-(-0.4)].10^{-9}}{2.8.85.10^{-12}}[/tex]

[tex]E=0.03954.10^{3}[/tex]

E = 39.54

The resulting Electric Field at any point is 39.54N/C.

The magnitude of the resulting electric field at any point should be  28.2 N/C.

Since the Charge of uniform density (0.30 nC/m2) should be allocated over the xy plane, and charge of uniform density (−0.40 nC/m2)should be allocated over the yz plane.

So,

E1

= σ1/2ε0

= 0.30e-9/(2*8.85e-12)

= 16.949 N/C

So, direction of E1 is +z

Now

E2 = σ2/2ε0

= 0.40e-9/(2*8.85e-12)

= 22.6 N/C

So,  direction of E2 is -x

Now

E = √(E1*E1+E2*E2)

= √(16.949*16.949+22.6*22.6)

= 28.2 N/C

Learn more about magnitude here: https://brainly.com/question/14576767

Answer:

The mas unit is the the 'Kilogram' written as 'kg'

Volume is 10 L

Explanation:

The complete question is

If you have a density of 100 kg/L, and a mass of 1000 units, tell me the following: First, what are the mass units?

Second, what is the volume

mass units is the 'Kilogram', written as 'kg'

density = mass/volume = 100 kg/L

the mass  = 1000 kg

volume = mass/density = 1000/100 = 10 L

....................