a body accelerate uniformly from rest at the rate of 3meters per seconds for 8 sec . calculate the distance covered by the body during the acceleration
SOL​

Answer:

C) radio waves, microwaves, infrared, visible, ultraviolet, x-rays, gamma rays

Explanation:

radio waves have lowest  energy , lowest  frequency and highest  wavelength

gamma rays  have highest  energy , highest  frequency and least  wavelength

Answer: C

Explanation:

Answer:

b

Explanation:

Answer:

A.   number of neutrons of Magnesium Mg = 13

B.   The average mass of Mg = 22.29 amu

C.   the magnesium composition on Mars is not the same as that on Earth.

Explanation:

Isotopes are atoms with the same atomic number but different mass number. This is due to the difference in mass of the neutrons.

The atomic number of Magnesium Mg = 12

The atomic number of an element is the number of protons present in the atomic nucleus of the element

i.e Atomic number = number of protons = 12

The mass number of an element is the sum of the protons and neutrons in the atomic nucleus of the element.

Mass number = number of protons + number of neutrons

Given that the mass number of Mg = 25

Then;

25 = 12 + number of neutrons

25 - 12 = number of neutrons

13 = number of neutrons

number of neutrons of Magnesium Mg = 13

B. What is the average atomic mass of magnesium in these rocks?

The average atomic mass of an element which exhibit isotopy is the average mass of its various isotopes as they occur naturally in any quantity of the element.

Therefore the average atomic mass of magnesium can be calculated as:

= [tex]\mathtt{\dfrac{(23.9872 \times 79.70) + ( 24.9886 \times 10.13) + (25.9846 \times 10.17) }{79.7 + 10.13 +10.17}}[/tex]

= [tex]\mathtt{\dfrac{(1911.77984) + ( 53.134518) + (264.263382) }{100}}[/tex]

= [tex]\mathtt{\dfrac{2229.17774 }{100}}[/tex]

The average mass of Mg = 22.29 amu

C. Is the magnesium composition on Mars the same as that on Earth? Explain.

The average atomic weight of magnesium on Earth is said to be 24.305 amu while that of Mars is 22.29 amu.

There difference in the average atomic weight result into difference in their composition. Therefore,the magnesium composition on Mars is not the same as that on Earth.

Given that,

Temperature = 10⁸ K

We need to calculate the peak wavelength in the blackbody spectrum

Using formula of peak wavelength

[tex]peak\ wavelength = \dfrac{2.898\times10^{-3}}{T}[/tex]

Where, T= temperature

Put the value into the formula

[tex]peak\ wavelength = \dfrac{2.898\times10^{-3}}{10^{8}}[/tex]

[tex]peak\ wavelength = 2.90\times10^{-11}\ m[/tex]

[tex]peak\ wavelength = 290\ nm[/tex]

This range of wavelength is ultraviolet.

Hence, The peak wavelength in the blackbody spectrum is 290 nm and the range of wavelength is ultraviolet electromagnetic spectrum .

Answer

123.5 x 10 ^-3 radian

Explanation:

Given the Width of slit a = 1 x 10⁻³ / 200

a = 5x 10⁻⁶ m .

angle at which first order peak is formed

= λ / a (where λ is wavelength and a is width of slit)

given λ = 617.3 x 10⁻⁹ m

a = 5 x 10⁻⁶

θ = 617.3 x 10⁻⁹ / 5 x 10⁻⁶

= 123.5x 10⁻³ radian .

first order peak is formed at an angle of 123.5 x 10⁻³ radian .

Explanation:

Answer:

the pressure after contraction is 2×10^5 Pa

the speed after contraction is 15m/s

Explanation:

We were given Pressure P to be 3.5 x 10^5 that is Flowing with speed of 5.0 m/s,

For us to calculate pressure we need to calculate the area first as;

Let initial Area = A₁

And Final area A₂

We were told that in a horizontal pipe it contracts to 1/3 its former area. Which means

A₂= A₁/3.................

V₁ is the speed

the pressure and speed of the water after the contraction can be calculated using equation of continuity below

A₂V₂ = A₁V₁

But

If we substitute given value in the expresion we have

V₂ = (3A *5)/A

V₂ = 15m/s

Therefore, the speed after contraction is 15m/s

Now we can calculate the pressure using

Bernoulli's equation

p₁ + ½ρv₁² + ρgh₁ = p₂ + ½ρv₂² + ρgh₂

But we know that the pipe is horizontal, then "h" terms cancel out then

p₁ + ½ρv₁² = p₂ + ½ρv₂²

Making P₂ subject of formula we have

p₂ = 0.5ρ( V ₁² - v₂² ) + P₁

P₂=. 0.5 × 1000 (5² -15² ) + 3*10^5

=2×10^5 Pa

Therefore, the pressure after contraction is 2×10^5 Pa

(a)  the final speed of the water after contraction is 15 m/s.

(b) The final pressure of the water after contraction is 2.5 x 10⁵ Pa.

The given parameters;

Let the initial area of the pipe = A₁

Apply the continuity equation to determine the final speed of the water after contraction as follows;

[tex]A_1 V_1 = A_2 V_2\\\\V_2 = \frac{A_1V_1}{A_2} \\\\V_2 = \frac{A_1 \times 5}{\frac{1}{3} A_1 } \\\\V_2 = 15 \ m/s[/tex]

The final pressure of the water after contraction is determined by applying Bernoulli's equation for horizontal pipe;

[tex]P_1 + \frac{1}{2} \rho V_1^2= P_2 + \frac{1}{2} \rho V_2^2\\\\P_2 = \frac{1}{2} \rho (V_1^2 - V_2^2) + P_1\\\\P_2 = \frac{1}{2} \times 1000(5^2 - 15^2) + 3.5 \times 10^5\\\\P_2 = 2.5 \times 10^5 \ Pa[/tex]

Learn more here:https://brainly.com/question/19566865

Answer:

Answer A : Fusion followed by beta decay (electron emission)

Explanation:

Notice that you want the Atomic number to increase, that is the number of protons in a nucleus. So if all four cases given experience the same fusion of nuclei, the only one that net increases the number of protons in the last stage, is the reaction that undergoes a beta decay (with emission of an electron) thus leaving a positive imbalance of positive charge (proton generated in the beta decay of a neutron).

Therefore, answer A is the correct one.

Answer:

A : Fusion followed by beta decay (electron emission)

Explanation:

Ap3x

Answer:

0.09N, attractive

Explanation:

It can be deducted from the question that the currents are arranged in parallel settings, then it is obvious that the force on each of the wire will be attractive toward the other wire.

the magnitude of force can be determined by using below formula;

F2 = (μ₀/2π)(I₁I₂/d)I₂

μ₀ = constant = 4π × 10^-7 H/m,

I₁, I₂ = currents= 30A

L = the length o the wire=30m

d = distance between these two wires= 0.06m

Since the current are arranged in the same direction, they exhibit attractive force on each other.

Then plugging the values Into the formula above we have

F₂ = (4π × 10^-7 T.m/A)/2π) × ((30A)²/ 0.06m)× 30 m

= 0.09 N, attractive

Therefore, the magnitude and direction of the force is 0.09 N, attractive

Answer:

1.8/0.61 =2.95 ft

Hope it helped u if yes mark me BRAINLIEST!

Tysm!

;)

Answer:

attached below is the free body diagram of the missing  illustration

Initial kinetic energy of the electron = 3 eV

Explanation:

The conclusion that can be drawn about the kinetic energy of the electron is

[tex]E_{e} = E_{3} - E_{1}[/tex]

E[tex]_{e}[/tex] = initial kinetic energy of the electron

E[tex]_{1}[/tex] = -4 eV

E[tex]_{3}[/tex] = -1 eV

insert the values into the equation above

[tex]E_{e}[/tex] = -1 -(-4)  eV

   = -1 + 4 = 3 eV

Answer:

factor that bug maximum KE change is 0.52284

Explanation:

given data

vertical distance = 6.5 cm

ripples decrease to =  4.7 cm

solution

We apply here formula for the KE of particle that executes the simple harmonic motion that is express as

KE = (0.5) × m × A² × ω²     .................1

and kinetic energy is  directly proportional to square of the amplitude.

so

[tex]\frac{KE2}{KE1} = \frac{A2^2}{A1^2}[/tex]      .............2

[tex]\frac{KE2}{KE1} = \frac{4.7^2}{6.5^2}[/tex]

[tex]\frac{KE2}{KE1}[/tex] = 0.52284

so factor that bug maximum KE change is 0.52284

The factor does the bug's maximum KE change should be considered as the 0.52284.

Since

vertical distance = 6.5 cm

ripples decrease to =  4.7 cm

So here we apply the given formula

KE = (0.5) × m × A² × ω²     .................1

here,

kinetic energy is directly proportional to square of the amplitude.

So,

= 4.7^2/ 6.5^2

= 0.52284

hence, The factor does the bug's maximum KE change should be considered as the 0.52284.

Learn more about distance here: https://brainly.com/question/17802937

Answer:

Explanation:

If a sample emits 2000 counts per second when the detector is 1 meter from the sample, then;

2000 counts per second = 1 meter ... 1

In order to know the number of counts per second that would be observed when the detector is 3 meters from the sample, we will have;

x count per second = 3 meter ... 2

Solving the two expressions simultaneously for x we will have;

2000 counts per second = 1 meter

x counts per second = 3 meter

Cross multiply to get x

2000 * 3 = 1* x

6000 = x

This shows that 6000 counts per second would be observed when the detector is 3 meters from the sample

Answer:

1.6×10²⁰

Explanation:

An ampere is a Coulomb per second.

1 A = 1 C / s

The amount of charge after 5 seconds is:

5.0 A × 5 s = 25 C

The number of electrons is:

25 C × (1 electron / 1.6×10⁻¹⁹ C) = 1.6×10²⁰ electrons

Answer:Light Amplification by Stimulated Emission of Radiation. It is able to convert light or electrical energy into focused high energy beam to treat some sickness and diseases.

Explanation:

Answer:

Light amplification by stimulated emission of radiation

Answer:

1.34 mm

Explanation:

A double slit experiment is conducted with a light which has a wavelength of 620 nm

The fringes are separated 2.3 mm apart

The light is changed to a wavelength length of 360 nm

Let x represent the fringe spacing as a result of the change in wavelength

Therefore,the fringe spacing can be calculated as follows

2.3mm/x= 620nm/360nm

Multiply both sides

x × 620= 2.3×360

620x= 828

x= 828/620

x= 1.34 mm

Answer:

0.03143 Gy

Explanation:

Mass of the human body = 70 kg

Mass of potassium in the human body = 140 g

chemical atomic mass of potassium = 39.1

From avogadros number, we know that 1 atomic mass of an element contains 6.023 × 10^(23) atoms

Thus,

140g of potassium will contain;

(140 × 6.023 × 10^(23))/(39.1) = 2.1566 × 10^(24) atoms

We are told that the natural abundance of one of the 40K isotopes is 0.012%.

Thus;

Number of atoms of this isotope = 0.012% × 6.023 × 10^(23) = 7.2276 × 10^(19) K-40 atoms

Formula for activity of K-40 is given as;

Activity = (0.693 × number of K-40 atoms)/half life

Activity = (0.693 × 7.2276 × 10^(19))/1300000000

Activity = 3.85 × 10^(10)

We are told that each decay deposits 1.0 MeV of energy into the body.

Thus;

Total energy absorbed by the body in a year = 3.85 × 10^(10) × 1 × 365 = 1405.25 × 10^(10) MeV

Now, 1 MeV = 1.602 × 10^(-13) joules

Thus;

Total energy absorbed by the body in a year = 1405.25 × 10^(10) × 1.602 × 10^(-13) = 2.25 J

1 Gy = 1 J/kg

Thus;

Yearly dose = 2.25/70 = 0.03143 Gy

Answer:

Net force = 2.3686 × 10^(20) N

Explanation:

To solve this, we have to find the force of the earth acting on the moon and the force of the sun acting on the moon and find the difference.

Now, from standards;

Mass of earth;M_e = 5.98 × 10^(24) kg

Mass of moon;M_m = 7.36 × 10^(22) kg

Mass of sun;M_s = 1.99 × 10^(30) kg

Distance between the sun and earth;d_se = 1.5 × 10^(11) m

Distance between moon and earth;d_em = 3.84 × 10^(8) m

Distance between sun and moon;d_sm = (1.5 × 10^(11)) - (3.84 × 10^(8)) = 1496.96 × 10^(8) m

Gravitational constant;G = 6.67 × 10^(-11) Nm²/kg²

Now formula for gravitational force between the earth and the moon is;

F_em = (G × M_e × M_m)/(d_em)²

Plugging in relevant values, we have;

F_em = (6.67 × 10^(-11) × 5.98 × 10^(24) × 7.36 × 10^(22))/(3.84 × 10^(8))²

F_em = 1.9909 × 10^(20) N

Similarly, formula for gravitational force between the sun and moon is;

F_sm = (G × M_s × M_m)/(d_sm)²

Plugging in relevant values, we have;

F_se = (6.67 × 10^(-11) × 1.99 × 10^(30) ×

7.36 × 10^(22))/(1496.96 × 10^(8))²

F_se = 4.3595 × 10^(20) N

Thus, net force = F_se - F_em

Net force = (4.3595 × 10^(20) N) - (1.9909 × 10^(20) N) = 2.3686 × 10^(20) N

Answer:

Explanation:

The general decay equation is given as [tex]N = N_0e^{-\lambda t} \\\\[/tex], then;

[tex]\dfrac{N}{N_0} = e^{-\lambda t} \\[/tex] where;

[tex]N/N_0[/tex] is the fraction of the radioactive substance present = 1/16

[tex]\lambda[/tex] is the decay constant

t is the time taken for decay to occur = 8,450s

Before we can find the half life of the material, we need to get the decay constant first.

Substituting the given values into the formula above, we will have;

[tex]\frac{1}{16} = e^{-\lambda(8450)} \\\\Taking\ ln\ of \both \ sides\\\\ln(\frac{1}{16} ) = ln(e^{-\lambda(8450)}) \\\\\\ln (\frac{1}{16} ) = -8450 \lambda\\\\\lambda = \frac{-2.7726}{-8450}\\ \\\lambda = 0.000328[/tex]

Half life f the material is expressed as [tex]t_{1/2} = \frac{0.693}{\lambda}[/tex]

[tex]t_{1/2} = \frac{0.693}{0.000328}[/tex]

[tex]t_{1/2} = 2,112.8 secs[/tex]

Hence, the half life of the material is approximately 2113 seconds

Answer:

metal conducts heat better than wood.

Explanation:

Metals are generally good conductors of heat, and they usually conduct heat at a relatively rapid rate. Inside the room with a uniform temperature, a metal when touched will rapidly conduct the heat from your hand, leaving your hand with a cooler feeling. Wood on the other hand is a poor heat conductor, so the heat is not conducted from your hand fast enough to cool it up to the point that your hand feels cool.

Answer:

11.2 Ω

Explanation:

The impedance of a circuit is given by;

Z= √R^2 +(XL-XC)^2

Since

Resistance R= 10 Ω

Inductive reactance XL= 12 Ω

Capacitive reactance XC= 7 Ω

Z= √10^2 + (12-7)^2

Z= √100 + 25

Z= √125

Z= 11.2 Ω

Answer:

B. 1.6 x 10⁻³ m

Explanation:

The magnetic field at the center of the loop is given by;

[tex]B = \frac{\mu_o I }{2R}[/tex]

Where;

μ₀ is the permeability of free space

I is the current in the loop

R is the radius of the circular loop

B is the magnetic field

Given;

diameter of the loop = 1cm

radius of the loop, r = 0.5 cm = 0.005 m

magnetic field, B = 2.5mT = 2.5 x 10⁻³ T

The current in the loop is calculated as;

[tex]I = \frac{2BR}{\mu_o} \\\\I = \frac{2*2.5*10^{-3}*0.005}{4\pi*10^{-7}} \\\\I = 19.89 \ A[/tex]

The magnetic at a distance from the long straight wire is calculated as;

[tex]B = \frac{\mu_o I}{2\pi d}[/tex]

where;

d is the distance from the wire;

[tex]d = \frac{\mu_o I}{2\pi B} \\\\d = \frac{4\pi *10^{-7} * 19.89}{2\pi *2.5*10^{-3}} \\\\d = 1.6 *10^{-3} \ m[/tex]

Therefore, the distance from the wire where the magnetic field is 2.5 mT is 1.6 x 10⁻³ m.

B. 1.6 x 10⁻³ m

This question involves the concepts of the magnetic field due to a loop and a  current-carrying wire and current.

A long straight wire carrying the same current as the loop of wire has a magnetic field of 2.5 mT at a distance of b "B. 1.5 x 10⁻³ m".

The magnetic field at the center of a loop of wire is given by the following formula:

[tex]B=\frac{\mu_o I}{2r}[/tex]

where,

B = Magnetic Field = 2.5 mT = 2.5 x 10⁻³ T

μ₀ = permeability of free space = 4π x 10⁻⁷ N/A²

I = current = ?

r = radius = diameter/2 = 1 cm/2 = 0.5 cm = 0.005 m

Therefore,

[tex]I = \frac{(2.5\ x\ 10^{-3}\ T)(2)(0.005\ m)}{4\pi\ x\ 10^{-7}\ N/A^2}[/tex]

I = 19.9 A

Now, the magnetic field at a distance from the straight wire is given by the following formula:

[tex]B=\frac{\mu_o I}{2\pi R}[/tex]

where,

R = distance from wire = ?

Therefore,

[tex]R = \frac{(4\pi \ x \ 10^{-7}\ N/A^2)(19.9\ A)}{2\pi(2.5\ x\ 10^{-3}\ T)}[/tex]

R = 1.6 x 10⁻³ m

Learn more about the magnetic field here:

https://brainly.com/question/19542022?referrer=searchResults

Answer:

Explanation:

B. There is a counterclockwise induced current in the loop

Explanation:

This in line with the right hand grip rule,

The right hand rule states that: to determine the direction of the magnetic force on a positive moving charge, ƒ, point the thumb of the right hand in the direction of v, the fingers in the direction of B, and a perpendicular to the palm points in the direction of F.

1. Which example best describes a restoring force?

B) the force applied to restore a spring to its original length

2. A spring is compressed, resulting in its displacement to the right. What happens to the spring when it is released?

C) The spring exerts a restoring force to the left and returns to its equilibrium position.

3. A 2-N force is applied to a spring, and there is displacement of 0.4 m. How much would the spring be displaced if a 5-N force was applied?

D) 1 m

4. Hooke’s law is described mathematically using the formula Fsp=−kx. Which statement is correct about the spring force, Fsp?

D)It is a vector quantity.

5. What happens to the displacement vector when the spring constant has a higher value and the applied force remains constant?

A) It decreases in magnatude.

Answer:

The uncertainty in momentum is 5.25x 10^25Jsm

Explanation:

We know that

h bar = h/2π

So

1.05x 10^34=h/2pπ

h=1.05x 10^ 34(2π)=6.597x 10^-34Js

dp=(6.597x10^-34/4pπ)/(1x10^-10)

=5.25x10^-25 Jsm

Answer:

Increase in frequency of the laser

Explanation:

Because An increase in frequency will result in more lines per centimeter and a smaller distance between each consecutive line. And a decrease in distance between each gratin

Answer:

The intensity is  [tex]I_2 = 1654 \ W/m^2[/tex]

Explanation:

From the question we are told that

    The intensity of the unpolarized light is  [tex]I_o = 4000 \ W/m^2[/tex]

    The  angle between the ideal polarizing sheet is  [tex]\theta = 0.429 \ rad = 0.429 * 57.296 = 24.58^o[/tex]

Generally the intensity of  light emerging from the first polarizer is mathematically represented as

               [tex]I_2 = \frac{I_o}{2}[/tex]

substituting values

               [tex]I_1 = \frac{4000}{2}[/tex]

                [tex]I_1 = 2000 \ W/m^2[/tex]

Then the intensity of  incident light emerging from the second polarizer is mathematically represented by Malus law as

                 [tex]I_2 = I_1 cos^2 (\theta )[/tex]

substituting values

                [tex]I_2 = 2000 * [cos (24.58)]^2[/tex]

                [tex]I_2 = 1654 \ W/m^2[/tex]

Answer: The properties of magnets are used to make electricity. Moving magnetic fields pull and push electrons. Moving a magnet around a coil of wire, or moving a coil of wire around a magnet, pushes the electrons in the wire and creates an electrical current.

Answer:

t = 23.6 min

Explanation:

First we need to find the mass of air in the room:

m = ρV

where,

m = mass of air in the room = ?

ρ = density of air at room temperature = 1.2041 kg/m³

V = Volume of room = 16 m x 16.5 m x 12.3 m = 3247.2 m³

Therefore,

m = (1.2041 kg/m³)(3247.2 m³)

m = 3909.95 kg

Now, we find the amount of energy consumed to heat the room:

E = m C ΔT

where,

E = Energy consumed = ?

C = Specific Heat of air at room temperature = 1 KJ/kg.⁰C

ΔT = Change in temperature = 21 °C - 13.5 °C = 7.5 °C

Therefore,

E = (3909.95 kg)(1 KJ/kg.°C)(7.5 °C)

E = 29324.62 KJ

Now, the time period can be calculated as:

P = E/t

t = E/P

where,

t = Time needed = ?

P = Power of heater = 20.7 KW

Therefore,

t = 29324.62 KJ/20.7 KW

t = (1416.65 s)(1 min/60 s)

t = 23.6 min

Answer:

All electromagnetic waves travel at the same speed in a vacuum

Explanation:

All the wave listed in the question are electromagnetic waves. The speed of electromagnetic waves (collectively called light) in a vacuum is fixed. Its value is 3×10^8 ms^-1. This is a constant for all electromagnetic waves irrespective of their frequency.

Hence for any electromagnetic wave, its speed is 3×10^8 ms^-1, this will be the common velocity of all the electromagnetic waves listed in the question in a vacuum thus we can not rank them according to speed.