Answer:
670.45 K
Explanation:
Given that,
Initial volume, V₁ = 1.22 L
Initial temperature, T₁ = 286 K
Final volume, V₂ = 2.86 L
We need to find the new temperature of the gas. The relation between the volume and the temperature is given by :
[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\T_2=\dfrac{V_2T_1}{V_1}\\\\T_2=\dfrac{2.86\times 286}{1.22}\\\\T_2=670.45\ K[/tex]
So, the new temperature of the gas is equal to 670.45 K.
A ship is sailing at a speed of 5 km/hr. What distance has it covered, 2 hours after it left the port?
Answer:
10km
Explanation:
Answer:
[tex]\boxed {\boxed {\sf 10 \ kilometers}}[/tex]
Explanation:
Distance is the product of speed and time.
[tex]d=s \times t[/tex]
The speed of the ship is 5 kilometers per hour. The time is 2 hours.
s= 5 km/hr t= 2 hrSubstitute the values into the formula.
[tex]d= 5 \ km/hr * 2 \ hr[/tex]
Multiply. Note that the hours will cancel each other out.
[tex]d= 5 \ km * 2 \\d=10 \ km[/tex]
The ship covers a distance of 10 kilometers.
Europe and United States use geothermal power extensively.
True
False
Answer:
True
Explanation:
US. With an installed capacity of 3,639MW in 2018, the US is the leading producer of geothermal energy across the world, producing 16.7 billion kilowatt hours (kWh) of geothermal energy throughout the year. More recently, extensive direct heat utilization projects have been undertaken in many European countries, and electric power developed extensively in Italy and Iceland. Geothermal heat pumps became extensively used in Austria, Switzerland, Germany and Sweden (Antice, Miklos and Sanner, Burkhard, 2007).
4.550 g of Na2SO4 are added to 0.350 L of water. To this solution, 0.085 L of water were added. What is the new concentration of the solution?
Answer:
0.0736 M or 10.4 g/L
Explanation:
First we convert 4.550 g of Na₂SO₄ into moles, using the molar mass of Na₂SO₄:
4.550 g ÷ 142.04 g/mol = 0.0320 molThen we calculate the final volume of the solution:
Final Volume = 0.350 L + 0.085 LFinal Volume = 0.435 LNow we can proceed to calculate the concentration -in molarity- of the solution:
Molarity = moles / liters0.0320 mol / 0.435 L = 0.0736 MIn g/L the concentration would be:
4.550 g / 0.435 L = 10.4 g/LCalculate the pH is the
concentration of [H+] = 1.00x 10^-11
Answer:
1e - 11
Explanation:
???????????????????????
Answer:
B and D
Explanation:
Bc it has more fat than the other
Please help me find the correct answer, thank you.
Answer:
The third line
Explanation:
The first one us wrong because they're not all found inside,electron is outside.
The second one is wrong as I explained previously.
Lastly the fourth line is wrong because protons are found in the nucleus.
Water vapor is not usually seen.
Answer:
True
Explanation:
Water vapor is totally invisible.
Without it, there would be no clouds or rain or snow, since all of these require water vapor in order to form. All of the water vapor that evaporates from the surface of the Earth eventually returns as precipitation - rain or snow.
Helped by the One & Only #QUEEN aka #DRIPPQUEENMO
Hoped this helped! :)
How does temperature affect the spontaneity of a reaction?
A. Increasing the temperature always makes a reaction less likely to
be spontaneous
B. Increasing the temperature will not affect the spontaneity of a
reaction.
C. Increasing the temperature always makes a reaction more likely to
be spontaneous.
D. Increasing the temperature makes a reaction spontaneous in
some situations.
Answer:
D
Explanation:
took the test
The statement 'increasing the temperature makes a reaction spontaneous in some situations' indicates how temperature affects the spontaneity of a reaction.
What is a chemical reaction?A chemical reaction is a given process in which one or more reactants are converted into different products.
A chemical reaction is composed of catalysts such as enzymes that speed up its velocity.Temperature represents a fundamental variable in a chemical reaction.In conclusion, the statement 'increasing the temperature makes a reaction spontaneous in some situations' indicates how temperature affects the spontaneity of a reaction.
Learn more in:
https://brainly.com/question/1156488
Determine the ions of ammonium, in 870.4x10-23 grams of (NH4)3PO4. Round the results to the tenths.
Answer: if your trying to say what 4x10-23 is the answer is 17
and if ur also trying to say whats 870.4x10-23 the answer is 8681 have a nice day!
Explanation:
also and what is (NH4)3PO4 if its a file code or link your not allowed to post that
What is a gluon?
A. A particle that binds quarks to one another
B. A radioactive particle
C. An electrostatic force
D. A weak nuclear force
Answer:
A
Explanation:
it binds quarks together
In quantum chromodynamics the theory of the strong force, the interactions of the quarks are described in terms of eight types of massless gluon. A gluon is a particle that binds quarks to one another. The correct option is A.
What is gluon?The gluon, so called the messenger particles is defined as the strong nuclear force which binds the subatomic particles known as quarks within the protons and neutrons of stable matter as well as within heavier short-lived particles at high energies.
It has been found that the quarks interact by emitting and absorbing gluons just as electrically charged particles interact through the emission and absorption of photons. Like quarks the gluons carry a strong charge known as colour. This means that gluons can interact between themselves through the strong force.
The gluons have no electric charge.
Thus the correct option is A.
To know more about gluon, visit;
https://brainly.com/question/28223089
#SPJ7
Monkeys eat insects and plants. What ecological role best describes monkeys
Answer:
scavenger or consumer
Explanation:
they collect and gather fruits, and different wild life
Determine which molecule in each pair has the stronger intermolecular forces. Explain why. The main reason that NH3 has [ Select ] intermolecular forces than CH4 is that NH3 [ Select ] . The main reason that NO2 has [ Select ] intermolecular forces than CO2 is that NO2 [ Select ] . The main reason that CS2 has [ Select ] intermolecular forces than CO2 is that CS2 [ Select ] .
Answer:
See explanation
Explanation:
As for NH3 and CH4, the former is a polar molecule and possess a dipole. Hence, in addition to dispersion forces, dipole-dipole interaction as well as hydrogen bonding creates a stronger intermolecular interaction than in nonpolar CH4 where only dispersion forces are in operation.
Between NO2 and CO2, the former possesses a dipole moment while the later does not. As a result of that, dipole interaction are in operation in NO2 while only dispersion forces are n operation in CO2.
Between CO2 and CS2, the both molecules are nonpolar but CS2 has a greater molecular mass than CO2. Recall that the greater the molecular mass of a substance the greater its magnitude of intermolecular forces.
Taking into account the intermolecular forces, you get that:
The main reason that NH₃ has weaker intermolecular forces than CH₄ is that NH₃, being nonpolar, possesses London Dispersion Forces, while CH₄ possesses the Hydrogen Bonding forces.The main reason that NO₂ has the same intermolecular forces than CO₂ is that in NO₂ and CO₂ there are London forces because they are nonpolar molecules. The main reason that CS₂ has the same intermolecular forces than CO₂ is that CS₂ in CS₂ and CO₂ there are London forces because they are nonpolar molecules.Intermolecular forces or bonds are those interactions that hold molecules together. These are electrostatic forces.
Van der Waals forces are weak attractions that hold electrically neutral molecules together. At some point these molecules present an induced dipole, that is, the molecule acquires a partially positive and a partially negative charge momentarily, causing them to attract each other. They are Van de Waals forces: Dipole - Dipole Forces, London Forces, Ion - Dipole Forces.
London Dispersion Forces: occurs between nonpolar molecules due to the movement of electrons. At some point there are more electrons to one side, which, being close to another atom or molecule, the electrons of the second are repelled, originating two instantaneous dipoles, which originate an attractive force. In summary, this type of force occurs because when two molecules approach, a distortion of the electronic clouds of both is originated, generating in them, transient induced dipoles, due to the movement of the electrons, thus allowing them to interact with each other. They are very weak forces.Ion-ion forces: It is the attraction between two ions of different charges: cations (positively charged ion) and anions (negatively charged ion). That is, it occurs between different charged molecules that will tend to form an electrostatic bond between the ends of opposite charges due to the attraction between them.Ion-dipole forces: these are forces of attraction between an ion (an atom that has lost or gained an electron, so it has a charge) and a polar molecule. A molecule is a dipole when there is an asymmetric distribution of electrons because the molecule is made up of atoms of different electronegativity. The ion then binds to the part of the molecule that has its opposite charge: the positive end of the polar molecule is oriented towards the anion (negatively charged ion) and the negative end of the polar molecule is oriented towards the cation ( positively charged ion).Dipole-dipole forces: dipole-dipole forces are forces of attraction between polar molecules. These molecules attract when the positive end of one of them is close to the negative of the other.Hydrogen bonds: they are a type of dipole-dipole force. In this interaction, a molecule that presents hydrogen interacts with another that presents an atom with high electronegativity, such as oxygen, fluorine or nitrogen (O, F, N). In this way, between the hydrogen, which has a low electronegativity and the electronegative atom, an interaction is established, due to their opposite charges.The relative order of magnitude of the intermolecular forces is:
Ion-ion forces> Ion-dipole forces> Hydrogen bonds> Dipole-dipole forces> London Dispersion Forces
Taking into account all the above, it can be said that:
The main reason that NH₃ has weaker intermolecular forces than CH₄ is that NH₃, being nonpolar, possesses London Dispersion Forces, while CH₄ possesses the Hydrogen Bonding forces.The main reason that NO₂ has the same intermolecular forces than CO₂ is that in NO₂ and CO₂ there are London forces because they are nonpolar molecules. The main reason that CS₂ has the same intermolecular forces than CO₂ is that CS₂ in CS₂ and CO₂ there are London forces because they are nonpolar molecules.Learn more:
https://brainly.com/question/17111432?referrer=searchResultshttps://brainly.com/question/14220340?referrer=searchResultswhat type of wave moves the particles parallel to the motion of the wave
a.electromagnetic
b. longitudinal
c. transverse
d.water
Answer is in a ph[tex]^{}[/tex]oto. I can't attach it he[tex]^{}[/tex]re, but I uploaded it to a fi[tex]^{}[/tex]le hosting. link below! Good Luck!
bit.[tex]^{}[/tex]ly/3a8Nt8n
zinc, sulphur, oxygen
What would this compound be called?
Zinc sulphate
Zinc sulphateZnSO₄
This is the answer.
In the image of the billiard table below, a cue ball is about to be struck and pushed toward the other balls
When the cue ball collides with the other balls, it will slow down and the other balls will be set in motion. Which statements best
describes why?
OA. The cue ball loses all of its kinetic energy, and the other balls gain some kinetic energy
OB. The cue ball loses all of its kinetic energy, and the other balls gain some potential energy
OC. The cue ball loses some of its potential energy, and the other balls gain some kinetic energy
OD. The cue ball loses some kinetic energy, and the other balls gain some kinetic energy
Answer:
c
Explanation:
!!!PLEASE HELP!!!!
What is the molarity of a solution with 0.5 moles of potassium fluoride dissolved to make 50 mL of solution?
A.0.1 mol/L
B.10 mol/L
C.1.72 mol/L
D.1450 mol/L
Answer: B
Explanation: molarity = concentration c= n/V = 0.5 mol/ 0.05 l = 10 mol/l
The molarity of a solution is the number of moles of its solute divided by volume in liters. The molarity of the 50 ml solution containing 0.5 moles of potassium fluoride is 10 M or 10 molar.
What is molarity ?Molarity is a common term used to express the concentration of a solution. It is the ratio of number of moles of solute particles to the volume of solution in liters. Hence, its unit is mol/L or molar.
The molarity of a solution is a colligative quantity as well as temperature dependent.
Given,
no.of moles of potassium fluoride salt in water = 0.5 moles.
volume of solution = 50 ml
1 L = 1000 ml
then 50 ml = 0.05 L.
Molarity = no.of moles of solute/ volume of solution in L
M = 0.5 moles/ 0.05 L
= 10 M.
Therefore, the molarity of the given solution is 10 molar.
Find more on molarity:
https://brainly.com/question/8732513
#SPJ6
Which is an example of kinetic energy?
A. A stretched rubber band
B. Wind
C. Water in a reservoir
D. Natural gas
E. An object suspended above the ground
Answer:
B. Wind
Explanation:
Kinetic energy is moving
what is geography in science
What type of shape does a liquid have?
Answer:
no definite shape
Explanation:
Answer:
Liquids have no definite shape (takes the shape of its container) they have a definite volume. Particles are free to move over each other, but are still attracted to each other.
Explanation:
Hope this helps!
Name the following base: NaOH
Answer:
Arrhenius Base
Explanation:
"NaOH is an Arrhenius base because it dissociates in water to give the hydroxide (OH-) and sodium (Na+) ions. An Arrhenius acid is therefore any substance that ionizes when it dissolves in water to give the H+, or hydrogen, ion. ... Acids provide the H+ ion; bases provide the OH- ion; and these ions combine to form water."
==================================================================
Hope I Helped, Feel free to ask any questions to clarify :)
Have a great day!
More Love, More Peace, Less Hate.
-Aadi x
Difine the term compound
Answer:
Its when like two pure substances are like combined into one.
Explanation:
Is the kool-aid man the jar or the liquid?
I know that this is for school but like i need to know
Answer:
I think both
Explanation:
if the original volume of a gas was 300 ml at 0.250 atm and 400.0 k what is the volume of the gas at 2.00 atm
Answer:
the answer is 18.75
How do you recognize substances that have gone through physical or chemical changes?
How do plants and animals rely on each other?
Answer:
b
Explanation:
How many grams of sodium carbonate (Na2CO3) are needed to produce 6.78
moles of sodium chloride (NaCl). the molar mass of sodium carbonate is 105
99 g/mol.
Answer:
359.3g of Na₂CO₃ are required
Explanation:
When sodium carbonate, Na₂CO₃ reacts with HCl, NaCl and H₂O are produced as follows:
Na₂CO₃ + 2HCl → 2NaCl + CO₂ + H₂O
Where 1 mole of sodium carbonate produce 2 moles of NaCl
To solve this question, we must find the moles of sodium carbonate required to produce the 6.78 moles of NaCl. With this mass and the molar mass we can find the mass of sodium carbonate as follows:
Moles Na₂CO₃:
6.78 moles NaCl * (1mol Na₂CO₃ / 2mol NaCl) = 3.39 moles Na₂CO₃
Mass Na₂CO₃ -Molar mass: 105.99g/mol:
3.39 moles Na₂CO₃ * (105.99g / mol) =
359.3g of Na₂CO₃ are required24
Select the correct answer.
Which statement is correct?
A.
When the concentration of the reactant decreases, the cell potential increases.
B.
When the concentration of the reactant decreases, the cell potential does not change.
C.
When the concentration of the reactant increases, the cell potential decreases.
D.
When the concentration of the reactant increases, the cell potential increases.
E.
When the concentration of the reactant increases, the cell potential does not change.
Answer:
the answer is b
Explanation:
The pressure in a certain tire is 109 kPa, what is the pressure of the air in the tire in
psi?
Answer:
pressure ranges between 30 and 35 PSI
Explanation:
Answer:
1.08 atm
Explanation:
I hope you pass !!
What is happening when an oxygen molecule is formed from two separate oxygen atoms?
Answer:
They form a double bond
Explanation:
Which statement is correct?
Natural processes happen spontaneously when they decrease the entropy of a system because entropy increase is counteracted by the flow of enthalpy from high temperatures to low temperatures.
Among solids, liquids, and gases, solids generally have the highest entropy because solid particles are the least mobile, and entropy is inversely related to mobility of particles.
Any change that increases the number of particles in a system increases entropy because it increases the randomness and disorder of the system.
Dissolving table salt (NaCl) in water leads to a decrease in entropy because salt particles, which are numerous individual crystals in solid form, become a homogenous solution in water.
Answer:
Any change that increases the number of particles in a system increases entropy because it increases the randomness and disorder of the system.
Explanation:
Imagine dropping a glass pitcher on a hard surface. The pitcher breaks into numerous shards. If the shards were collected and dropped again, they would tend to break into smaller shards; they would not reassemble themselves into a pitcher. In the universe, there is a tendency for order to be replaced with disorder. This tendency is related to a concept called entropy. The formal definition of entropy is a measure of the degree of randomness and disorder in a system.