Answer:
3.43 A
Explanation:
Applying,
V = IR'.............. Equation 1
Where V = Voltage, I = current, R' = Total resistance
Make I the subject of the equation
I = V/R'........... Equation 2
From the question
Given: V = 120 volt, R' = (12+23) = 35 0hm
Substitute these values into equation 2
I = 120/35
I = 3.43 A
differences between weightlessness in space and weightlessness in earth
Answer:
it depends on a person's own weight
Answer:
The gravity is roughly the same. The inverse square law applies to gravity and that means that being 60 miles above Earth is about the same as being on Earth. The thing is, they are going really fast in an orbit and thus falling around the Earth. The weightlessness comes from a sort of cancellation of gravity pulling them down and their going perpendicular to that force. The forces are cancelling and making them relatively “weightless”. It’s not really weightlessness but just an equilibrium reached between the two accelerations of gravity and their motion against the pull of the Earth.
Explanation:
How come we can see orange? In simple words.
Answer:
When sunlight shines through an orange solution, the violet, blue and green wavelengths are absorbed. The other colors pass through.
Two Brothers are playing soccer on the beach. One brother kicks the ball really hard and the ball lands in the water, about 50 meters from the beach. They wonder if the ball will float back to the beach.
Answer:
Due to wind and waves of water.
Explanation:
They wonder that the ball will float back to the beach because of the wind and the waves of the water. The wind blows towards the beach which moves the water in the form of waves towards the beach so if the ball lands in the water, it will floats on the surface of water and move towards the beach with the help of wind and waves of the sea. The ball floats on the water due to its lighter weight and lower density as compared to water.
Find the equivalent resistance of this
circuit.
Ri
R2
1002
2002
R3
600 12
Answer:
63016
Explanation:
Ri+R2+R3 this is called series circuit
Answer:
200
Explanation:
100+200=300
1/300+1/600=200
25. Suppose there is no unbalanced force acting on a moving object. How will
the object's motion continue?
A. The speed of the object will decrease.
B. The speed of the object will increase.
C. The speed of the object will remain the same.
D. The direction of the object's velocity will change.
Answer:
C
Explanation:
Grammar is probably one of the most important components of the sciences besides math.
no unbalanced forces means that there is no force left over that cause an acceleration. All the forces are balanced.
So the Speed will not decrease. Not A.
The speed will not increase. Not B
The direction will not be affected. Not D
The answer is C
A parallel plate capacitor of capacitance Co has plates of area A with separation d between them. When it is connected to a battery of voltage Vo, it has charge of magnitude Qo on its plates. It is then disconnected from the battery and the plates are pulled apart to a separation 2d without discharging them. After the plates are 2d apart, the new capacitance and the potential difference between the plates are: (Show all steps) [2 marks] a. ½ Co, ½ Vo b. ½ Co, 2Vo c. Co, Vo d. Co, 2Vo e. 2Co, 2Vo
Answer:
b. 1/2·C₀, 2·V₀
Explanation:
The capacitance on the parallel plate capacitor = C₀
The area of the plates = A
The voltage on the battery = V₀
The magnitude of the charge on the plate = Q₀
The new distance between the plates = 2·d
From an online physics source, we have;
[tex]C_0 = \epsilon_0 \times \dfrac{A}{d}[/tex]
Where;
ε₀ = Constant
A = The area of the plates
With the new distance, 2·d, we get;
[tex]C_{new} = \epsilon_0 \times \dfrac{A}{2\cdot d} = \dfrac{1}{2} \times \epsilon_0 \times \dfrac{A}{d} = \dfrac{1}{2} \times C_0[/tex]
Therefore;
[tex]The \ new \ capacitance \ C_{new} = \dfrac{1}{2} \times C_0[/tex]
The potential difference, 'V', is given as follows;
[tex]C = \dfrac{Q}{V}[/tex]
Therefore;
[tex]V = \dfrac{Q}{C}[/tex]
Given that Q = Q₀, we get;
[tex]V = \dfrac{Q_0}{\dfrac{1}{2} \times C_0} = 2 \times \dfrac{Q_0}{C_0} = 2 \times V_0[/tex]
∴ V = 2 × V₀
The new potential difference, V = 2·V₀
Therefore, after the plates are 2·d apart, the new capacitance and potential difference between the plates are;
1/2·C₀, 2·V₀.
At a distance of 2d, the potential difference will be twice the potential difference before while the capacitance will be half the value before.
Given to us
The capacitance on the parallel plate capacitor = C₀The area of the plate = AThe voltage on the battery = V₀The magnitude of the charge in the plate = Q₀The new distance between the plates = 2d What is Capacitance?We know capacitance can be written as,
[tex]C= \dfrac{\epsilon_0 A}{d}[/tex]
where C is the capacitance,
A is the area,
d is the distance and
ε₀ is the electrostatic constant,
Capacitance before,[tex]C= \dfrac{\epsilon_0 A}{d}[/tex]
Capacitance Afterwards,[tex]C= \dfrac{\epsilon_0 A}{2d}[/tex]
[tex]C=\dfrac{1}{2} \times \dfrac{\epsilon_0 A}{d}[/tex]
[tex]C=\dfrac{1}{2} \times C_0[/tex]
What is Voltage(Potential difference)?We know that for the voltage we can write,
[tex]\rm Voltage = \dfrac{Charge}{Capacitance}[/tex]
Voltage before[tex]V=\dfrac{Q_0}{C_0}[/tex]
Voltage Afterwards[tex]V_{new} = \dfrac{Q_0}{C_{new}}[/tex]
[tex]V_{new} = \dfrac{Q_0}{\dfrac{1}{2} \times C_0}[/tex]
[tex]V_{new} = 2 \times\dfrac{Q_0}{C_0}[/tex]
[tex]V_{new} = 2 \times V_0[/tex]
Hence, At a distance of 2d, the potential difference will be twice the potential difference before while the capacitance will be half the value before.
Learn more about Capacitance:
https://brainly.com/question/12356566
Energy can enter and exit which of the following systems?
A. Both open and close
B. Both open and isolated
C. Open Only
C. Isolated only
Answer:
A. Both open and close
Explanation:
just took the test
Elements in Group____are common alkaline earth metals.
Answer here
Answer:
Explanation:
k
Answer:
Explanation:
Group 2 consists of the elements in the second column. They all have a combining number (valence number) of 2+ after giving away 2 electrons.They start with Beryllium (element 4 in the periodic table) and end with Radium (element 88 in the periodic table).NEED HELP The main difference between kinetic energy and potential energy is thatSingle choice.
(2 Points)
kinetic energy involves position, and potential energy involves motion.
kinetic energy involves motion, and potential energy involves position.
although both energies involve motion, only kinetic energy involves position.
although both energies involve position, only potential energy involves motion.
Answer:
kinetic energy involves motion, and potential energy involves position.although both energies involve position, only potential energy involves motion.hope it is helpful to you ☺️☺️✌️
Describe how an oscilloscope should be used to measure the frequency of the sound wave from the sonometer
Answer:
T = reading (cm) time base (s / cm)
f = 1 / T
Explanation:
An oscilloscope is a piece of equipment that allows you to visualize and measure a wave that reaches you, in the case of having a sonometer this transforms the sound wave into an electrical signal to be introduced through one of the voltage channels of the equipment, on the screen we will see the oscillating alternating signal, if it is fixed we can make the reading, if it is moving the time base and the trigger must be adjusted to stop it.
In the oscilloscope we can read the period of the signal, this is the time it takes for the signal to repeat itself with this value, we can calculate the frequency with the formula, for the reading of the period the distance is measured on the labeled screen and multiplied by the time base
T = reading (cm) time base (s / cm)
f = 1 / T
sheet of paper and a ball having same mass are dropped from the same height and obviously paper balls faster than a sheet of paper. what conclusion can be drawn from this acticity?
Answer:
In free fall, all items will fall at the same time. You were told that they have the same mass hence g×t which is constant.Three dogs scout sparky and dusty are playing with a teddy bear. Scout and sparky are pullung the teddy bear to the left
Answer:
To the left side.
Explanation:
The teddy bear will move towards the left side because more force is applied by scout and sparky than dusty. The reason for this movement of teddy bear to the left is due to more force is applied by the two dogs present at the left side of the teddy bear while on the other hand, one dog is present at the right side of teddy bear which applied less force so that's why we can say that the teddy bear moves to the left side rather than to the right side.
Se dea caer una pelota de basquetbol desde una altura de 90 metros.Calcular: El tiempo en que demorara en caer y a velcidad con la que llega al suelo
Answer:
1. t = 4.24 s
2. [tex]v_{f} = 42.43 m/s [/tex]
Explanation:
Podemos encontrar el tiempo de caída con la siguiente ecuación:
[tex] v_{f} = v_{0} + gt [/tex] (1)
En donde:
[tex] v_{f}[/tex]: es la velocidad final de la pelota
[tex] v_{0}[/tex]: es la velocidad inicial = 0 (se deja caer)
g: es la aceleración debida a la gravedad = 10 m/s²
Debemos hallar primero la velocidad final. Podemos usar la ecuación:
[tex] v_{f}^{2} = v_{0}^{2} + 2gh [/tex] (2)
En donde:
h: es la altura = 90 m
[tex] v_{f} = \sqrt{2gh} = \sqrt{2*10 m/s^{2}*90 m} = 42.43 m/s [/tex]
Entonces, la velocidad con la que la pelota llega al suelo es 42.43 m/s.
Ahora podemos encontar el tiempo que tarda en caer la pelota resolviendo la ecuación (1) para "t":
[tex] t = \frac{v_{f}}{g} = \frac{42.43 m/s}{10 m/s^{2}} = 4.24 s [/tex]
Por lo tanto, la pelota tarda 4.24 segundos en caer.
Espero que te sea de utilidad!
Starting circuit One battery. 2 light bulbs in parallel; switch What is the voltage across the battery? What is the voltage across light bulb 1? What is the voltage across light bulb 2?
Answer:
The voltage across light bulb 1 and light bulb 2 is the the same i.e V
Explanation:
In a parallel circuit, the Voltage is same across all the components of the circuit and the current flowing through each component is added to get the total current across the circuit.
Let us say, the voltage across the circuit is V. The voltage across light bulb 1 and light bulb 2 is the the same i.e V
Which of the following could be included in your gamer's creed that would help keep gamers safe?
A. I will work hard and play harder. Games are my life.
B. I will use privacy features that gaming sites provide to ensure I do not share personal information with strangers.
C. I will do whatever I can to win games I play online.
D. I will share the game equally with my friends and family.
swered
Answer:
The answer is B. I will use privacy features that gaming sites provide to ensure I do not share personal information with strangers.
Explanation:
It keeps you safe online
Answer: the answer is b
Explanation:
4. When a key on piano is pressed, a sound is heard. What produces this sound?
A. the vibrating key of the piano
B.
The Vibrating String Of Piano
C. the finger pressing the piano key
D. the air molecules inside the piano
Answer:
D
Explanation:
since we press the key , air molecules ate presented and sound wave is formed what we hear.
Answer:
B
Explanation:
the vibrating string of pianoQuestion 4
The diagram represents the motion of a sound wave. The distance between points A and C is 9 meters (m), and it initially takes the wave 3 seconds (s) to travel.
What will be the wavelength of the sound wave if the velocity of the wave remains constant but the pitch is tripled?
A 3 meters
B 6 meters
с 9 meters
D 18 meters
Answer:A
Explanation:
The wavelength of the sound wave will be 3 meters.
What is wavelength?
The wavelength of any wave is defined as the distance between two max adjacent amplitudes, or the distance between two successive troughs or crest.
Now it is given that:
Distance =9 meters
time = 3 seconds
pitch=1/3 seconds
The velocity of the sound will be
[tex]V=\dfrac{d}{t}=\dfrac{9}{3}=3\ \frac{m}{s}[/tex]
Now from the question the wavelength of the sound wave if the velocity of the wave remains constant but the pitch is tripled
so [tex]f=3\times \dfrac{1}{3}=1 herts[/tex]
Now the velocity of the sound will be
[tex]v=f\times \lambda[/tex]
[tex]\lambda=\dfrac{v}{f}=\dfrac{3}{1}=3\ m[/tex]
Thus the wavelength of the sound wave will be 3 meters.
To know more about wavelength, follow
https://brainly.com/question/10728818
Which of the following are true about electrons? a.) They are positively charged b.) They are negatively charged c.) They are found inside the nucleus d.) a & c
Answer:
A and C
Explanation:
BRAINLIEST PLS
Answer:
b
Explanation:
The answer is b.. because the charge of electrons is opposite to that of protons.. the combination of the equal number of protons and electrons has a total charge of zero(0)....
The equation below is used to calculate the mechanical advantage of an ideal wheel and axle.
mechanical advantage =
wheel radius
__________
axle radius
A student compares two wheel-and-axle simple machines. Machine 1 has a wheel radius of 50 centimeters, and an axle radius of 10 centimeters. Machine 2 has a wheel radius of 100 centimeters, and an axle radius of 10 centimeters. What is true of these simple machines’ mechanical advantage?
A.
Machine 1’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 2.
B.
Machine 1’s mechanical advantage is greater, which means that this machine can move faster than Machine 2.
C.
Machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
D.
Machine 2’s mechanical advantage is greater, which means that this machine can move faster than Machine 1.
Answer:
b
Explanation:
Machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
Mechanical advantageThe term mechanical advantage is the ratio of the radius of wheel to the radius of the axle for a wheel and axle system.
The true statement about the two machines that were compared; 1 and 2 is that, machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
Learn more about mechanical advantage:https://brainly.com/question/16617083
#SPJ2
What is rising temperatures
Answer:
i don't know but have a good day
PLEASE HELP THIS IS BIG. ITS 2ND GRADE WORK BTW. HELP FOR CROWN AND POINTS!!!!
What did Ben Franklin show with his famous kite experiment?
that lightning is electricity
how sounds could be recorded
that electromagnetic waves could be found and turned into sound energy
how to create a battery
Answer:
your answer is A
Explanation:
brainliest plzzzz
Answer:
c is the correct answer
Multiple Choice
Which is the best reason to be wary of those you talk to on the Internet?
A. They may not be who they say they are.
B. You don't know where they live.
C. You don't know their favorite foods.
D. They may not be in the same grade as you.
Below is a single of DNA, What is the complementary base pair for RNA?
AGC, CGT, ATA, GAT
The Universal Space Agency wants to know the results of your Sim investigation. Write your report to the lead chemist, explaining why the staff can smell the chocolate bar. Use evidence from your investigation in your explanation.
Answer:
Condensation can also produce water droplets on the outside of soda cans or glasses of cold water. When warm air hits the cold surface, it reaches its dew point and condenses. This leaves droplets of water on the glass or can. When a pocket of air becomes full of water vapor, clouds form.
Explanation:
What is role of force on the speed of moving object?
Explanation:
this is the ans hope it works
Answer:
Forces make things speed up (or accelerate). When a force pushes or pulls the object, the object will move in the direction of the force. The bigger the force, and the lighter the object, the greater the acceleration.
Explanation:
The action from a force can cause an object to move or speed up (accelerate), to slow down (decelerate), to stop, or to change direction. Since any change in velocity is considered acceleration, it can be said that a force on an object results in the acceleration of an object.
A simple mathematical relationship exists between the mass of an object (m), the net force on the object (f) and its acceleration (a). The acceleration of an object is directly proportional to the net force and indirectly proportional to the object’s mass (a = f/m).