Answer:
Current = 22.5A
Explanation:
By using ohm's law [tex]i = \frac{v}{q} [/tex]45/2 = 22.5Parallel light rays are refracted _______and_____ to a point called as focal point after passing through convex lens.
An electromagnetic wave has a wavelength of 10 nm. Calculate its frequency and identify to which part of the electromagnetic spectrum the wave belongs.
The frequency of an electromagnetic wave with wavelength of 10nm will be 3 × 10∧7 Hz and would belong to the X-ray or ultraviolet part of the electromagnetic spectrum due to its wavelength
What is frequency?
Frequency is defined as the number of oscillations of a wave per unit time and is measured in hertz(Hz).
It is also inversely proportional to the wavelength.
How to calculate the frequency
The frequency of an electromagnetic wave can be calculated using the formula;
frequency = velocity of light divided by the wavelength
f = v ÷ λ
Note that the velocity of light = 3 × 10 ∧8 m/s
Wavelength = 10nm
Frequency, f = 3 × 10∧8 ÷ 10 = 3 × 10∧7 Hz
Hence, the frequency of an electromagnetic wave with wavelength of 10nm will be 3 × 10∧7 Hz and would belong to the X-ray or ultraviolet part of the electromagnetic spectrum due to its wavelength.
Learn more about electromagnetic spectrum here:
https://brainly.com/question/13803241
#SPJ1
Sian wants to measure the number of seconds that it takes for the contents of a beaker to change from clear to purple. which of these tools should she use for this purpose? an electronic balance a stopwatch a barometer a graduated cylinder
Sian wants to count the number of seconds it takes for a beaker's contents to become purple from clear. She should utilize a stopwatch as her instrument for this job.
What is a stopwatch?Watch that, when turned on and off, measures the amount of time that has passed since a specific time.
Sian wants to measure the number of seconds that it takes for the contents of a beaker to change from clear to purple. Stopwatch is the tool she should utilize for this purpose.
Hence, option B is correct.
To learn more about the stopwatch refer;
https://brainly.com/question/13758413
#SPJ1
Answer: Sian wants to count the number of seconds it takes for a beaker's contents to become purple from clear. She should utilize a stopwatch as her instrument for this job.
option b
Explanation:
explain the law of conservation of energy in your own words
Answer:
The law of conservation of mass states that the total energy of an isolated system remains constant over time.
Explanation: Hope it helps you :))))
Have a good day
A 5000kva 230/13. 8kv single phase power transformer has a resistance of 0. 38 ohms and reactance of 1. 9 ohms
The reactance of the circuit will be 5.233×10⁻⁴ ohm. Inductive reactance is the product of 2 times π frequency and the coil inductance.
What is reactance?
When alternating electricity passes through pure reactance, it causes a voltage drop that is 90 degrees out of phase with the current.
The letter “X” is used to represent reactance in mathematics, and it is measured in ohms.
The inductive reactance of a coil is calculated using the following formula:
Inductive reactance, or XL, is the product of 2 times p (pi), and the frequency of the ac current in hertz, and the coil inductance in henries.
XL= 2πfL
Where,
f {frequency)
L (Inductance)
The reactance of the circuit is found as;
[tex]\rm R_{new}=0.38[{(\frac{1}{60} )^2][/tex]
[tex]\rm R_{new}=1.055 \times 10^{-4} \ ohm[/tex]
The inductance of the circuit is;
[tex]\rm X_{new}=1.9(\frac{1}{60} )^2\\\\X_{new}= 5.233 \times 10^{-4}\ ohm[/tex]
Hence, the reactance of the circuit will be 5.233×10⁻⁴ ohm.
To learn more about the reactance, refer to the link;
https://brainly.com/question/17129912
#SPJ4
The diagram shows an incomplete scale drawing to find the resultant of two 10N forces acting at a point in the direction shown
The resultant of the two 10N forces acting at a point in the given direction is the single force which will have the same effect as all the forces acting at that point.
What is the resultant of forces?The resultant of two or more forces is that single force which will have the same effect as all the forces acting at that point in a given direction.
Since forces are vector quantities, the resultant force is obtained by vector addition.
The direction of the forces are also obtained.
Therefore, the resultant of the two 10N forces acting at a point in the given direction is the single force which will have the same effect as all the forces acting at that point.
Learn more about resultant force at: https://brainly.com/question/8119756
#SPJ1
Estimate how long a 2500 W electric kettle would take to boil away 1.5 Kg of water . The specific latent heat of vaporization of water is 4000000 J / Kg .
The time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds
How to calculate the timeUse the formula:
Power × time = mass × specific heat
Given mass = 1. 5kg
Specific latent heat of vaporization = 4000000 J/ Kg
Power = 2500 W
Substitute the values into the formula
Power × time = mass × specific heat
2500 × time = 1. 5 × 4000000
Make 'time' the subject
time = 1. 5 × 4000000 ÷ 2500 = 6000000 ÷ 2500 = 2400 seconds
Therefore, the time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds.
Learn more about specific latent heat of vaporization:
https://brainly.in/question/1580957
#SPJ1
What is the direction of a vector that has the following components: x = -44 m y = -59 m
The direction of a vector that has the following components is 233°.
What is direction of a vector?
The direction of a vector is where its endpoint points. However, when at least one of the characteristics mentioned above is different, we say that the vectors are different.
In this case, this calculus will be:
[tex]tan\theta= \frac{59}{44} \\\theta= tan^{-1}(\frac{59}{44})\\ \theta= 233\°[/tex]
See more about vectors at brainly.com/question/13322477
#SPJ1
The vector with components x = -44 m and y = -59 m has a direction of approximately 52.16 degrees counterclockwise from the positive x-axis.
The direction of a vector with components x = -44 m and y = -59 m can be determined using trigonometry. In this case, we have:
x-component (x) = -44 m
y-component (y) = -59 m
We can use the inverse tangent function to find the angle.
The direction angle (θ) can be calculated as:
θ = arctan(y / x)
θ = arctan((-59 m) / (-44 m))
Calculating this expression:
θ ≈ arctan(1.341)
To find the actual angle, we can use a calculator or table to determine the inverse tangent of 1.341.
θ ≈ 52.16 degrees
Therefore, the direction of the vector is approximately 52.16 degrees in the counterclockwise direction from the positive x-axis.
The vector with components x = -44 m and y = -59 m has a direction of approximately 52.16 degrees counterclockwise from the positive x-axis.
To know more about Direction, visit
brainly.com/question/30817683
#SPJ11
PLease help with this this is pretty hard for me i kinda get it but not fully
Explanation:
Force = mass x acceleration
F= ma (formula)
15N = o.5kg x a
Divide both sides by o.5
a = 30 (greater acceleration)
15N = 4.5kg x a
Divide both sides by 4.5
a= 3.33 (great acceleration)
15N = 0.05kg x a
Divide both sides by 0.05
a = 300 (greatest acceleration)
Under water, Zachary can hear waves that travel with frequencies up to 15,000 Hz. What is the velocity of sound in water if a wave with this frequency has a wavelength of 1.2 m?
Answer:
18 000 m/ s
Explanation:
speed = wavelength * frequency
speed = 1.2 * 15 000 = 18 000 m/s
a carmboard 4ft x 4ft Square has the queen at the centre the queen is hit by the striker moves to the front edge, rebounds and goes inta hole behind the striking line. find the magnitude of displacement of queen a) from the centre to front edge b) from the front end edge to hole (c) from centre to hole.
Diagonal of cardboard=displacement to hole
√4²+4²4√2So displacement till edge
4√2/22√2Total distance
4√2+2√26√2ftFrom centre to hole displacement
2√2The law of conservation of momentum states that, if left alone, what happens to the total momentum of two interacting objects that make up a system?
Answer:
The momentum of the colliding bodies before and after the collision remains constant.
Explanation:
The momentum is constant.
Gravitation always does negative work. question 48 options: true false
The statement indicating that 'Gravitation always does negative work' is FALSE.
What is Gravitation?Gravitation is a fundamental physical force that makes objects attract each other in the Universe.
This force (Gravitation) is required to maintain both constant positions and movement of objects.
In conclusion, the statement indicating that 'Gravitation always does negative work' is FALSE.
Learn more about Gravitation here:
https://brainly.com/question/557206
#SPJ1
Answer:false
Explanation:
How does gravity influence our solar system? Claim Evidence Reasoning
Answer:
Gravity is what holds the planets in orbit around the sun and what keeps the moon in orbit around Earth. The gravitational pull of the moon pulls the seas towards it, causing the ocean tides. Gravity creates stars and planets by pulling together the material from which they are made.
Explanation: Hope it helps you :))))
Have a good day
the yacht shown below has a mass of 8300kg. determine its weight in air [ Acceleration due to gravity, g = 10 N kg¹
[tex]w = mg [/tex]
Answer:
83000kg
Explanation:
mass=8300kg
g=10
w=mg
8300×10=83000kg
A crane does exactly 1800 J of work to lift a steel beam from the ground. The beam is accidentally dropped and falls back to its starting position in 0.9 s. What is the mass of the beam
Answer:
Explanation:
1800x0.9=1620kg
Open the attached file. It shows 2 waves (a blue one and an orange one) that are moving through the same medium at the same time. Your challenge is to DRAW the RESULTANT wave and LABEL the areas of interference with CI, DI and/or points of TDI.
The diagram is labelled to DRAW the RESULTANT wave and LABEL the areas of interference with CI, DI and/or points of TDI.
What is refraction?When a light ray falls on the interface of two medium like air and water, then the portion of light is reflected and another portion of the light is refracted into the water medium. The angle of incidence is equal to the angle of reflection but the angle of incidence is larger then the angle of refraction.
Open the attached file. It shows 2 waves (a blue one and an orange one) that are moving through the same medium at the same time.
Thus, the diagram is labelled.
Learn more about refraction.
https://brainly.com/question/14760207
#SPJ1
What would happen if the atmosphere consisted of pure oxygen.
Answer:
Then our fires would become massive.
Explanation:
Hope this helps
Three objects have velocities that vary with time
#21
initial velocity=u=5m/sTime=t=2sAcceleration=a=1.3m/s²According to first equation of kinematics
v=u+atv=5+1.3(2)v=5+2.6v=7.6m/s#22
#a
v1=2+3(3)=2+9=11m/sv2=-8-4(3)=-20m/sv3=1-5(3)=-14m/sThe order is
v2<V3<v1#b
for speed find absolute velocity
S1=|11|=11m/sS2=|-20|=20m/sS3=|-14|=14m/sSo order is
S1<S3<S2
Answer:
See below ~
Explanation:
Question 21 :
⇒ v = u + at
⇒ v = 5 + 1.3 (2)
⇒ v = 5 + 2.6
⇒ v = 7.6 m/s
=============================================================
Question 22 : At t = 3
Subpart (a)
⇒ Object 1 : v = 2 + 3(3) = 11 m/s
⇒ Object 2 : v = -8 - 4(3) = -20 m/s
⇒ Object 3 : v = 1 - 5(3) = -14 m/s
⇒ Hence, their velocities are in the order : Object 2 < Object 3 < Object 1
Subpart (b)
⇒ Object 1 : v = | 2 + 3(3) | = 11 m/s
⇒ Object 2 : v = | -8 - 4(3) | = 20 m/s
⇒ Object 3 : v = | 1 - 5(3) | = 14 m/s
⇒ Hence, their speeds are in the order : Object 1 < Object 3 < Object 2
Which SI units are used to describe energy
Answer:
The SI units used to describe energy is Joule (J)
-1 A 4m long wire of cross-sectional area 2.5 X 10 m² has a resistance of 5. The conductivity of the wire is (a) 2.5 X 10' m (b) 4.0 X 10' m (c) 2.5 X 10'' m¹ -1 -1 (d) 4.0 X 10''m'
Answer:
3.2 [tex]10^{-2} ohm^{-1} m^{-1}[/tex]
Explanation:
Resistance=5 ohm
Length=4m
Cross sectional area=2.5 x 10
Conductivity = 1/ resistivity
=[tex]\frac{length}{resistance x cross sectional area}[/tex]
Conductivity=4 /5 x 2.5 x 10
Conductivity=4/125
Conductivity=3.2x[tex]10^{-2}[/tex][tex]ohm^{-1} m^{-1}[/tex]
V=I/R correctly expresses the relationship between voltage, current, and resistance.
True or False?
Answer:
False
Explanation:
It is actually I = V/R and V = I × R
if water completely boils in 7 minutes, how long does it take to evaporate
Answer: 20 minutes
Explanation: omm its 20 minutes
Two astronauts are taking a spacewalk outside the International Space Station. The first astronaut has a mass of 85.2 kg. The second has a mass of 65.4 kg. Initially, both astronauts have zero velocity relative to each other. Then, the astronauts push against each other, giving the first astronaut a final velocity of 1.2 m/s to the left. If the momentum of the system is conserved, what is the final velocity of the second person?
A. 1.3 m/s to the left
B. 1.6 m/s to the right
C. 1.6 m/s to the left
D. 1.3 m/s to the right
The final velocity of the second person after the collision is determined as 1.6 m/s to the right.
Final velocity of the second person
The final velocity of the second person is determined by applying the principle of conservation of linear momentum.
m1u1 + m2u2 = m1v1 + m2v2
85.2(0) + 65.4(0) = 85.2(-1.2) + 65.4(v2)
0 = -102.24 + 65.4v2
65.4v2 = 102.24
v2 = 1.56 m/s to the right
Thus, the final velocity of the second person after the collision is determined as 1.6 m/s to the right.
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
The next closest star to Earth, Proxima Centuri, is 4.25 lightyears away. How far is that in meters?
Answer:
4.0208 x 10^16 meters
Explanation:
speed of light in m/s * # seconds in a year * 4.25 years =
2.99792 x 10^8 * 3600*24*365.25 * 4.25 = 4.0208 x 10^16 m
How fast would you (70kg) need to run in order to have the same momentum as a car (750kg) driving at 5 km/hr?
From the calculations and the data provided, the speed is obtained as 15 m/s
What is momentum?The term momentum refers to the product of mass and velocity. Given that we can now proceed with the answer.
Since;
p = mv
m = 750kg
v = 5 km/hr or 1.4 m/s
p = 750kg * 1.4 m/s
p = 1050 kgm/s
If the mass of the body is 70kg, the speed is
v = p/m
v = 1050 kgm/s/70 Kg
= 15 m/s
Learn more about momentum:https://brainly.com/question/24030570
#SPJ1
If it takes you 10 seconds to move a chair 5 meters across the floor, using a force of 2 Newtons, how much power did you put out?
20 joules per second
100 joules per second
O 1 joules per second
4 joules per second
Answer:
power=work done÷time taken
2×5=10
10÷10=1
ans 1J per second
Emmett is lifting a box vertically. Which forces are necessary for calculating the total force?
Fp, Ff, and Fg
Fp and FN
Fp, FN, and Ff
Fp and Fg
The forces necessary for calculating the total force are Fp and Fg. The correct option is d.
What is gravity?The force of attraction felt by a person at the center of a planet or Earth is called as the gravity.
The gravitational force, Fg is the attractive force exerted by the Earth on the object that is equal to the mass of the object times the gravitational acceleration.
Emmett is lifting a box vertically. There are only vertical forces acting on the box.
The vertical force must counteract the weight of the object, is the upward force applied on the object.
Thus, the forces necessary for calculating the total force is Fp - Fg.
Learn more about gravity.
brainly.com/question/4014727
#SPJ1
The centers of two 350 kg spheres are separated by 2.00 m. what is the gravitational force between them?
label the diagram Please
The earth tilt about 23 degrees which leads to the formation of seasons on earth.
At what degree the earth tilt?This is tilted at 23 degrees from the vertical. The northern hemisphere is in the winter season.
This is the path as the earth revolves around the sun. It takes 1 year to complete this path.
This is the path as the earth rotates around its.
So we can conclude that the earth tilt about 23 degrees which leads to the formation of seasons on earth.
Learn more about season here: https://brainly.com/question/25870256
#SPJ1