1. Priya is responsible for collecting canned food along three different streets for her school's
annual Thanksgiving Food
Drive. She walks 300 m [N] along Oak Road, 500 m [E] along
Second Street, and then 150 m (S45°W) along Cross Ave. She completes the journey in 10
minutes
a. Draw a scale diagram of her trip.
b. Calculate her total distance, displacement, speed, and velocity.

Kettles heated on stoves are used to be made up of copper. This is because copper is a good conductor of heat and electricity.

Copper is used in making kettles. This is because copper is an excellent choice for a tea kettle as it is an excellent conductor of heat and electricity. This means that copper heats up quickly and evenly, making it ideal for the purpose of boiling water and preparing tea. Copper is also a durable material which can last for many years with proper care.

Copper kettles are polished from the outer surface as it is subject to corrosion that is caused by salts and sulfates. If the kettles are not cleaned completely, this corrosion, even as a slight film, will affect the taste of what is prepared in that copper kettle, giving a metallic sensation to taste.

Learn more about Copper here:

https://brainly.com/question/13677872

#SPJ2

Explanation:

the high heels has a more pressure than flat soles bcoz small area has more pressure than large area.

Answer:

when we add elements in a series circuit the voltage across each element decreases

Explanation:

In a series circuit the current the whole circuit is the same, since there is only one path,

resistance is the sum of the resistance of each element

          R_{eq} = ∑ R_i

if we write ohm's law

          V = i R_{eq}

we substitute

          V = i ∑ R_i

therefore the total voltage is

         V = ∑ i R_i = ∑ V_i

With this expression we see that the voltage decreases as we place more elements in the series circuit.

Specifically when we fear two elements the voltage across each element is

           V_i = V / 2

when we have 5 elements the voltage across each element is

           V_i = V / 5

therefore when we add elements in a series circuit the voltage across each element decreases

Answer:

d= 637323 meters

t= 360.5 seconds

Answer:

Explanation:

Since the height from which the shell was fired is the same as the height at which it lands (on the ground, to be specific), we will use the range equation. That is the only time you CAN use the range equation (when the initial height and the final height are exactly the same). The range equation is:

[tex]r=\frac{v_0^2sin(2\theta)}{g}[/tex] where v0 is the initial velocity, theta is the angle, and g is the pull of gravity (NOT negative). Filling in:

[tex]r=\frac{(1500)^2sin(9.0*10^1)}{9.8}[/tex] so, doing all that math gives us:

r = 6.4 × 10⁵ meters

Answer: Re-Horakhty

Explanation:

He has a human body and a falcon head, he has a crown in form of a disk with a cobra on his head. Ra-Horakhty was thought of as the god of the rising sun.

Answer:

The answer is "thumb-up".

Explanation:

The sling often called the arm sling, is a solution for preventing either shoulder or elbow motion during healing. A triangle bandage could be constructed.

A sling is a strong tissue loop that descends from the head to hold the forearm. The armrests in the sling bent also at the elbow.

The injured hand of the forearm should be positioned inside the pin position in the joint above the level of the elbow when putting the forearm sling.

Answer:

Rifle Momentum=7.77kg*m/s v'= 1.554 m/s

Explanation:

a) m1v1 + m2v2 = m1v1' + m2v2'

0+0 = 0.03*259 + P(rifle momentum)

solve for P

p= 7.77kg*m/s

b) 7.77= 5*v'

v'= 1.554 m/s

The momentum of the rifle just after the bullet is fired is 7.77 kg.m/s and the recoil velocity of the rifle at the time of firing is 1.554 m/s.

Momentum of a particle is the product of the mass of the particle and its velocity. Momentum is a vector quantity. It has both the magnitude and direction of motion. According to the Newton's second law of motion, the rate of change of the momentum is equal to the force acting on the particle which is in motion.

Momentum can be calculated by the general formula

p = m.v

where, p = momentum of the particle,

m = mass of the particle,

v = velocity of the particle.

Rifle Momentum= mass × velocity

P = m × v'

a) m1v1 + m2v2 = m1v1' + m2v2'

0+0 = 0.03 × 259 + P(rifle momentum)

0 = 7.77 + P

P = 7.77kg.m/s

b) p = m × v

7.77= 5 × v'

v'= 1.554 m/s

Learn more about Momentum here:

https://brainly.com/question/24030570

#SPJ2

Answer:

Coulomb, unit of electric charge in the metre- kilogram- second- ampere system, the basis of SI system of physics unit. The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.

Answer:

The magnetic field through the wire must be changing

Explanation:

According to Faraday's law, the induced emf, ε in a metallic conductor is directly proportional to the rate of change of magnetic flux,Φ  through it. This is stated mathematically as ε = dΦ/dt.

Now for the wire, the magnetic flux through it is given by Φ = ABcosθ where A = cross-sectional area of wire, B = magnetic field and θ = angle between A and B.

So, dΦ/dt = dABcosθ/dt

Since A and B are constant,

dΦ/dt = ABdcosθ/dt = -(dθ/dt)ABsinθ

Since dθ/dt implies a change in the angle between A and B, since A is constant, it implies that B must be rotating.

So, for an electric current (or voltage) to be produced in the wire, the magnetic field must be rotating or changing.

Answer:

(4) A = 3 A, A₂ = 11 A

(5) 7 A

Explanation:

(4)

From the diagram,

A = 3+6+2

A = 11 A

V = A₂R

A₂ = V/R₂............ Equation 1

Given: V = 12 V,  R₂ = 4 Ω

Substitute these values into equation 1

A₂ = 12/4

A₂ = 3 A

(5) Applying,

V = IR'

I = V/R'............ Equation 1

Where V = Voltage, I = cuurent, R' = total resistance.

But,

1/R' = (1/3)+(1/4)

1/R' = (3+4)/12

1/R' = 7/12

R' = 12/7 Ω

Given: V = 12 V

Substitute these values into equation 1

I = 12/(12/7)

I = 7 A

Therefore

A = 7 A

Answer:

The answer is "physics ".

Explanation:

Physics is the branch of science that addresses the properties of crystalline and its interaction with the fundamental elements of the universe. It covers subjects ranging in quantum mechanics with extremely little ones with quantum mechanics to the whole cosmos. You must be constant whether you like it or not, thus everyone must learn physics, irrespective of whether they're in Uganda, and plenty of other countries should have physics to dare study.

Answer:

Frequency = 24 × 10⁸ Hz

Explanation:

Given the following data;

Speed = 3 × 10⁸ m/s

Wavelength = 0.125 meters

To find the frequency of the electromagnetic wave;

Mathematically, the speed of a wave is given by the formula;

Speed = Wavelength × frequency

Substituting into the formula, we have;

3 × 10⁸ = 0.125 × frequency

Frequency = (3 × 10⁸)/0.125

Frequency = 24 × 10⁸ Hz

Answer:

9m^3

Explanation:

Given data

volume  v1=  3m^3

volume  v2=  ???

Temperature T1= 20.0°C.

Temperature T2= 60.0°C.

Applying the relation for temperature and volume

V1/T1= V2/T2

substitute

3/20= V2/60

3*60= V2*20

180= 20*V2

180/20= V2

V2= 9m^3

Hence the final volume is 9m^3

Answer:

Explanation:

The formula for centripetal acceleration is

[tex]a_c=\frac{v^2}{r}[/tex] and filling in:

[tex]11.3=\frac{(30.0)^2}{r}[/tex] and solving for r:

[tex]r=\frac{(30.0)^2}{11.3}[/tex] gives us that

r = 79.6 m

If the coefficient of static friction is 0.3, then the minimum force required to get it moving is equal in magnitude to the maximum static friction that can hold the body in place.

By Newton's second law,

• the net vertical force is 0, since the body doesn't move up or down, and in particular

∑ F = n - mg = n - 50 N = 0   ==>   n = 50 N

where n is the magnitude of the normal force; and

• the net horizontal force is also 0, since static friction keeps the body from moving, with

∑ F = F' - f = F' - µn = F' - 0.3 (50 N) = 0   ==>   F' = 15 N

where F' is the magnitude of the applied force, f is the magnitude of static friction, and µ is the friction coefficient.

Answer:

250 m/s

Explanation:

The mass of the bullet, m₁ = 100 g = 0.1 kg

The mass of the gun, m₂ = 5 kg

The backward velocity of the gun, v₂ = -5 m/s

Given that the momentum is conserved, we have;

The total initial momentum = The total final momentum

The gun and the bullet are at rest, therefore, we have;

The initial momentum = 0

The total final momentum = m₁·v₁ + m₂·v₂

Where;

v₁ = The forward velocity of the bullet

Therefore, we get;

m₁·v₁ + m₂·v₂ = 0

0.1 kg × v₁ + 5 kg × (-5 m/s) = 0

0.1 kg × v₁ = 5 kg × 5 m/s

v₁ = (5 kg × 5 m/s)/(0.1 kg) = 250 m/s

The forward velocity of the bullet, v₁ = 250 m/s

Answer:

hey hi mate

ur answer is move of above

hope you like it

plz mark it as brainliest

Answer:

answer is E

Explanation:

Answer:

Option (D)

Explanation:

A. The nucleus of one atom and the electron cloud of the another atom will not the cause of attraction.

B. The nucleus of one atom and the other atom will not cause the attraction.

C. The electron cloud of one atom and the electron cloud of the another will not cause attraction.

D. So, this option is correct.

Since fundamental units are elementary in nature and cannot be reduced further, so it can not be reduced further, so it cannot be expressed in other units

Answer:

the efficiency of the machine is 100%

Explanation:

Given;

load, L = 750 N

length of the lever, L = 2 m

effort applied, E = 250 N

Position of the load from the fulcrum,  = 50 cm

                                     50cm

     0↓--------------------------Δ-------------------------------↓---------200 cm

    750 N                                       x cm                 250 N

Apply the principle of moment;

750(50) = 250(x)

x = (750 x 50) / (250)

x = 150 cm

the distance of the effort = 150 cm = 1.5 m

the distance of the load = 50 cm = 0.5 m

The velocity ratio of the machine = 1.5/0.5

                                                        = 3

The mechanical advantage of the machine is calculated as;

M.A = Load/effort

M.A = 750 / 250

M.A = 3

The efficiency of the machine is calculated as;

E = (M.A / V.R) x 100%

E = (3/3) x 100% = 100%

Therefore, the efficiency of the machine is 100%

Answer:

a= 2.5m/s²

Explanation:

U=0

V=90km/hr

T= 10s

Convert 90km/hr to m/s

1km= 1000m

1hr= 3600s

(60×60)

therefore, 90km/hr = 90000/3600

90km/hr= 25m/s

From Newton First Equation,

V=U + AT

25=0+ A(10)

25= 10A

25/10 =10A/10

A= 2.5m/s²

Answer:

cemento potque es plano

Answer:

C. 28.2 deg

Explanation:

The horizontal range of a projectile is given as:

[tex]R = \frac{v^2Sin2\theta}{g}[/tex]

where,

R = Range

v = speed

θ = angle of launch

g = acceleration due to gravity = 9.81 m/s²

First, we will find the launch speed (v) by using the initial conditions:

R = 120 m

θ = 45°

Therefore,

[tex]120\ m = \frac{v^2Sin 90^o}{9.81\ m/s^2}\\\\v = \sqrt{(120\ m)(9.81\ m/s^2)}\\\\v = 34.31\ m/s[/tex]

Now, consider the second scenario to hit the target:

R = 100 m

Therefore,

[tex]100\ m = \frac{(34.31\ m/s)^2Sin2\theta}{9.81\ m/s^2}\\\\Sin2\theta = \frac{(100\ m)(9.81\ m/s^2)}{(34.31\ m/s)^2}\\\\2\theta = Sin^{-1}(0.833)\\\\\theta = \frac{56.44^o}{2}\\\theta = 28.22^o[/tex]

Hence, the correct option is:

C. 28.2 deg

Answer:

The answer is "91 m"

Explanation:

[tex]v_0 = 2.5 \ \frac{m}{s}\\\\a = 4.2\ \frac{m}{s^2}\\\\t = 6.0\ s\\\\\Delta x=?[/tex]

Using formula:

[tex]\Delta x = v_0 t +\frac{1}{2} at^2\\\\[/tex]

      [tex]= 2.5 \times 6.0 +\frac{1}{2} \times 4.2 \times 6.0^2\\\\= 90.6\ m \approx 91\ m[/tex]

26. D. crushing the sugar cube and dissolving it in water.

27. A. atom

28. B. molecule

29. B. plum pudding model of Joseph John Thomson

30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons.

31. D. protons and neutrons are relatively heavier than electrons.